1608550000

    Data sheet Z-series ZDU 2.5/3AN BL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZDU 2.5/3AN BL 1608550000 Feed-through terminal, Tension clamp connection, 2.5 mm², 800 V, 24 A, Blue 4008190077310 100 pc(s). Creation date November 14, 2018 8:45:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZDU 2.5/3AN BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   5.1 mm 64.5 mm 38.5 mm 39.5 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 2.539 inch 1.516 inch 9.14 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Blue 71-101238_CB48336 800 V 2.5 mm² 20 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD05.0009U 24 A 550 V 2.5 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of levels Number of potentials per tier PE connection   Tension-clamp connection,   for plug-in cross-connector, One end without connector   1   1   No End cover plate required No. of clamping points per level Levels cross-connected internally Mounting rail Yes 3 No TS 35 Additional technical data   Explosion-tested version Open sides   Yes right     Number of similar terminals Type of mounting 1 Snap-on 200039-1152892 27 A 600 V 600 V 26 AWG           Current size B (CSA) Current size D (CSA) Voltage size C (CSA) Wire cross section max. (CSA)   27 A 5A 600 V 12 AWG CSA rating data   Certificate No. (CSA) Current size C (CSA) Voltage size B (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   Creation date November 14, 2018 8:45:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZDU 2.5/3AN BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.05 mm² A3 10 mm AWG 12 4 mm² 0.5 mm² 0.5 mm²                 Clamping range, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 4 mm² top 3 Tension clamp connection AWG 30 2.5 mm² 2.5 mm² 0.5 mm²   Wire connection cross-section, solid core, min.         Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity E60693 30 AWG 30 AWG 600 V         Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG Current size C (UR) 25 A   EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   4 mm² 0.5 mm² Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   2.5 mm² 24 A IEC 60947-7-1 8 kV 800 V 31 A 1.33 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Product information   Descriptive text ordering data   Rated voltage is reduced to 400 V when using the cross-connector. Creation date November 14, 2018 8:45:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZDU 2.5/3AN BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   Attestation of Conformity IECEx Certificate ATEX Certificate DE_PT1101_20160418_1200_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Cross Connection Guide Safety note   Safety notice   Safety Information Creation date November 14, 2018 8:45:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZDU 2.5/3AN BL   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 14, 2018 8:45:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 5