1689970000

    Data sheet Z-series ZDK 2.5DU-PE Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZDK 2.5DU-PE 1689970000 Feed-through terminal, Double-tier terminal, Tension clamp connection, 2.5 mm², 500 V, 20 A, Dark Beige 4008190875473 50 pc(s). Creation date November 15, 2018 6:39:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZDK 2.5DU-PE   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   5.1 mm 79.5 mm 53 mm 54 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 3.13 inch 2.087 inch 14.24 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Dark Beige KEMA97ATEX4677U 275 V 2.5 mm² 20 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD05.0009U 20 A 275 V 2.5 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of levels Levels cross-connected internally Mounting rail   Tension-clamp connection,   With PE connection, for plug-in cross-connector, One end without connector   2   No   TS 35 End cover plate required No. of clamping points per level PE connection PEN function Yes 2 Yes No Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   Yes 1 Snap-on       Installation advice Open sides   Busbar right 12400-367 10 A 300 V 26 AWG         Current size B (CSA) Voltage size B (CSA) Wire cross section max. (CSA)   10 A 300 V 12 AWG CSA rating data   Certificate No. (CSA) Current size D (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   Creation date November 15, 2018 6:39:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZDK 2.5DU-PE   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.05 mm² A2 10 mm AWG 14 2.5 mm² 0.5 mm² 0.5 mm²                 Clamping range, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 2.5 mm² top 4 Tension clamp connection AWG 24 2.5 mm² 2.5 mm² 0.5 mm²   Wire connection cross-section, solid core, min.         Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity E60693 26 AWG 26 AWG 300 V         Conductor size Factory wiring max. (UR) 14 AWG Conductor size Field wiring max. (UR) 14 AWG Current size C (UR) 15 A   EC000901 EC000903 30-21-18-11 27-14-11-27 27-14-11-20 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   2.5 mm² 0.5 mm² Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   2.5 mm² 20 A IEC 60947-7-1 (-7-2) 6 kV 500 V 24 A 2.66 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000903 EC000897 27-14-11-18 27-14-11-27 27-14-11-20 Product information   Descriptive text technical data   2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ 6/5 crimping tool. Creation date November 15, 2018 6:39:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZDK 2.5DU-PE   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   Attestation of Conformity IECEx Certificate ATEX Certificate DE_PT1102_20160418_1071_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Cross Connection Guide Safety note   Safety notice   Safety Information Creation date November 15, 2018 6:39:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZDK 2.5DU-PE   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 15, 2018 6:39:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 5