1907020000

    Data sheet... SAK Series DK 4 QV/EN Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The Weidmüller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm² to 240 mm². General ordering data   Order No. Type GTIN (EAN) Qty.   1907020000 DK 4 QV/EN 4032248530786 100 pc(s). Creation date May 3, 2013 11:32:45 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 1     Data sheet... SAK Series DK 4 QV/EN   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Net weight   54 mm 47.5 mm 14.93 g       Width Height of lowest version   -50 °C     Storage temperature Continuous operating temp., max. 6.5 mm 47.5 mm Temperatures   Operating temperature Continuous operating temp., min.   100 °C Rated data IECEx/ATEX   Certificate No. (ATEX) ATEX certificate IEC Ex certificate Current (ATEX) Voltage, cross-connection   SIRA02ATEX3316U SIRA02ATEX3316U_e.pdf   IECEXSIR05.0041U_e.pdf     28 A   ATEX certificate Certificate No. (IECEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Operating temperature range Marking EN 60079-7 CrossConnectionGuide.pdf   Ex e II Marking ATEX Directive 94/9/EC   IECEXSIR05.0041U IECEXSIR05.0041U 275 V 4 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D Additional technical data   Explosion-tested version Open sides Version   No right Double terminal       Number of similar terminals Type of mounting   1 Snap-on 200039-2136577 150 V 36 A 22 AWG         Voltage size B (CSA) Current size B (CSA) Wire cross section max. (CSA)   300 V 36 A 10 AWG   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. CSA ratings data   Certificate No. (CSA) Voltage size C (CSA) Current size C (CSA) Wire cross section min. (CSA)   Clampable wires (additional connection)   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.   0.5 mm² 2.5 mm² Creation date May 3, 2013 11:32:45 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 2     Data sheet... SAK Series DK 4 QV/EN   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Clampable wires (rated connection)   Type of connection Screw connection Blade size 0.6 x 3.5 mm Number of connections 2 Clamping range, rated connection, max. 6 mm² Tightening torque, min. 0.5 Nm Torque level with DMS electric screwdriver 2 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 0.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 0.5 mm² Twin wire-end ferrules, min. 0.5 mm² Wire connection cross section AWG, min. AWG 26             Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 12 mm on side 0.13 mm² M3 1 Nm         Rated voltage Rated current Standards   500 V 32 A IEC 60947-7-1         Conductor size Factory wiring max. (cURus) 10 AWG Conductor size Field wiring max. (cURus) 10 AWG Current size B (cURus) 30 A Voltage size B (cURus) 300 V   PA 66 V-2     Colour   Beige SAK Series on side 2 Yes Yes           Type of connection Number of levels No. of clamping points per level Mounting rail   Screw connection 2 2 TS 32, TS 35                 A4 Wire connection cross section, solid core max. rated connection 6 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm² Twin wire-end ferrules, max. 2.5 mm² Wire connection cross section AWG, max. AWG 10 Rated data   Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity   4 mm² 8 kV 41 A 3 UL ratings data   Certificate No. (cURus) E60693VOL1SEC3 Conductor size Factory wiring min. (cURus) 22 AWG Conductor size Field wiring min. (cURus) 22 AWG Current size C (cURus) 30 A Voltage size C (cURus) 150 V     Material data   Material UL 94 flammability rating   System specifications   Product family Connection direction Number of connections Levels cross-connected internally End cover plate required   Creation date May 3, 2013 11:32:45 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 3     Data sheet... SAK Series DK 4 QV/EN   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Classifications   ETIM 3.0 eClass 5.1 eClass 7.1   EC000897 27-14-11-20 27-14-11-20       UNSPSC eClass 6.2   30-21-18-11 27-14-11-20 Product information   Descriptive text technical data   With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690 V. Approvals   Approvals ROHS   Conform Creation date May 3, 2013 11:32:45 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 4