Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
0,91
2
0,85
1
mW
100
mA
IF
30
mA
VREV
5
V
VESD HBM
2000
V
TJ
95
°C
IF Peak
ESD Threshold/ Human Body
Model
duty/ 10 @ 1 kHz
Optical Properties:
Chip Technology
0,7±0,15
1,38±0,05
Unit
72
Peak Forward Current
Continuous Forward Current
1,1
Value
PDiss
Junction Temperature
3,0±0,05
AlInGaP
Emitting Color
Scale - 12:1
Bright Green
Lens Type
Waterclear
Detail View:
General Information:
A
Polarity Mark
(Cathode)
2
1,5±0,05
Operating Temperature
1,18±0,05
1
Test conditions
Power Dissipation
Reverse Voltage
0,45±0,05
0,75±0,1
1,55±0,05
2
0,85±0,15
1
0,45±0,15
0,9±0,05
-40 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-40 up to +100 °C
Moisture Sensitivity Level (MSL)
2,42±0,05
OK
3
OK
Scale - 12:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
LiD
002.000
2022-02-26
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMSW SMT Mono-color Side
view Waterclear
ORDER CODE
155301VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
1/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Properties
Test conditions
Viewing Angle:
Value
min.
typ.
Peak Wavelength
λPeak
20 mA
Dominant Wavelength
λDom
20 mA
Luminous Intensity
IV
20 mA
Forward Voltage
VF
20 mA
2
Spectral Bandwidth
Δλ
20 mA
15
Reverse Current
IREV
5V
Viewing Angle Phi 0°
2θ50% 20 mA
max.
572
80
Unit
nm
570
nm
120
mcd
2.4
nm
10
120
V
µA
°
0°
- 60°
10°
100
Certification:
20°
30°
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [IEC 61249-2-21]
Halogen Free
Conform [JEDEC JS709B]
Relative Luminous Intensity (%)
90
40°
80
45°
70
50°
60
50
60°
40
70°
30
20
80°
10
90°
-90
-45
0
10
20
30
40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
LiD
002.000
2022-02-26
DIN ISO 2768-1m
50
60
70
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMSW SMT Mono-color Side
view Waterclear
ORDER CODE
155301VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
2/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Spectral:
Luminous Intensity vs. Forward Current:
300
250
100
Luminous Intensity [mcd]
Relative Intensity [%]
80
60
40
20
200
150
100
0
400
450
500
550
600
Wavelength [nm]
650
700
750
50
0
0
5
10
15
20
25
30
35
Forward Current [mA]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
LiD
002.000
2022-02-26
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMSW SMT Mono-color Side
view Waterclear
ORDER CODE
155301VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
3/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Forward Current vs. Forward Voltage:
Derating Curve:
40
35
35
30
30
Forward Current [mA]
Forward Current [mA]
25
20
15
25
20
15
10
10
5
5
0
0
20
40
60
80
100
120
0
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
Ambient Temperature [°C]
4,0
Forward Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
LiD
002.000
2022-02-26
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMSW SMT Mono-color Side
view Waterclear
ORDER CODE
155301VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
4/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
Packaging Specification - Reel: [mm]
P0
D0
K0
W3
T
W1
close to center
E1
A
P2
A
E2
B0
N
D
W
F
B
C
Top Cover
Tape
A
End
D1
P1
T1
A0
W2
T2
Polarity Mark
Start
Feeding direction
Carrier Tape
detail B
Cover Tape
B
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Components
No Component
min.100mm
Embossment
Cover Tape
min. 400mm
Packaging is reffered to the international standard IEC 60286-3:2013
tolerance
size
A0 B0
typ. typ.
3014 1,75 3,3
W
+0,3/ -0,1
8,0
T
T1
T2
K0
ref. max. typ. typ.
0,25 0,1 2,05 1,7
P0
P1
P2
±0,1 ±0,1 ±0,05
4,0 4,0 2,0
D0
+0,1/ -0,0
1,5
D1 E1
E2
F
min. ±0,1 min. ±0,05
0,3 1,75 6,25 3,5
Tape Type 2a
VPE / packaging unit
pcs.
Polystyrene
165° - 180°
Tolerance
Value
A
(mm)
± 2,0
178
B
(mm)
min.
1.5
C
(mm)
min.
12.8
D
(mm)
min.
20.2
N
(mm)
min.
50
W1
(mm)
+1,5
8.4
W2
(mm)
max.
14.4
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
LiD
002.000
2022-02-26
DIN ISO 2768-1m
W3
(mm)
min.
7.9
W3
(mm)
max.
10.9
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMSW SMT Mono-color Side
view Waterclear
ORDER CODE
155301VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
5/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
max. 60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³