159353850A6300

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties Test conditions Value Unit 6600 mW 5000 mA Continuous Forward Current IF 3000 mA ESD Threshold/ Human Body Model VESD HBM 1000 V 1,96 ±0,1 Power Dissipation PDiss 0,94 ±0,1 Peak Forward Current IF Peak 2,2 3,3 3,3 ±0,1 1,2 duty/ 10 @ 10 kHz Optical Properties: 0,4 ±0,1 0,4 Chip Technology AlGaAs Emitting Color Infrared Lens Type Diffused Plastic Housing Color 3,5 ±0,1 Black 1,77 ±0,1 Scale - 7:1 General Information: Schematic: Operating Temperature Anode Mark -20 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -20 up to +85 °C 3 2  IR LEDs emit high intensity IR light. not look directly into the LED during operation. This can be harmful to your eyes.  Wear protective eyewear.  Please follow safety precautions given in  IEC 60825-1 and IEC 62471.  Keep out of reach of children. Avoid direct eye and skin exposure to LED! CAUTION – IR + 1 3,5 ±0,1 2,7 ±0,1 Moisture Sensitivity Level (MSL) 3,0 ±0,1 Scale - 7:1  Do CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.001 2021-10-25 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-VCSL Vertical Cavity surface emitting Laser ORDER CODE 159353850A6300 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 1/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Test conditions Value Unit λPeak 3000 mA 850 nm Radiant Flux Φe 3000 mA 2100 mW Forward Voltage VF 3000 mA 2.1 V Spectral Bandwidth Δλ 3000 mA 2 nm 0.9 W/A Peak Wavelength Slope Efficiency SE Energy Conversion Efficiency ηEC 3000 mA 33 % Viewing Angle (X-Axis) 2θ50%,X 3000 mA 60 ° Viewing Angle (Y-Axis) 2θ50%,Y 3000 mA 45 ° 0.65 A Threshold Current ITh Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] 0° -30 Relative Intensity (%) Properties Viewing Angle X Direction: 45° 50° 55° 60° 65° 70° 75° 80° 85° 90° -90 -45 0 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.001 2021-10-25 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-VCSL Vertical Cavity surface emitting Laser ORDER CODE 159353850A6300 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 2/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Viewing Angle Y Direction: Spectral: 100 -20 0° Relative Intensity [%] 80 45° Relative Intensity (%) 50° 55° 60° 65° 60 40 70° 75° 20 80° 85° 90° -90 -45 0 0 700 750 800 850 900 950 1000 Wavelength [nm] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.001 2021-10-25 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-VCSL Vertical Cavity surface emitting Laser ORDER CODE 159353850A6300 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 3/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Radiant Flux vs. Forward Current: 7000,0 7000,0 6000,0 6000,0 5000,0 5000,0 Radiant Flux [mW] Forward Current [mA] Forward Current vs. Forward Voltage: 4000,0 3000,0 4000,0 3000,0 2000,0 2000,0 1000,0 1000,0 0,0 0,0 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 0 1000 2000 Forward Voltage [V] 3000 4000 5000 6000 7000 Forward Current [mA] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.001 2021-10-25 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-VCSL Vertical Cavity surface emitting Laser ORDER CODE 159353850A6300 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 4/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Derating Curve: 3,5 3 Forward Current [A] 2,5 2 1,5 1 0,5 0 0 20 40 60 Ambient Temperature [˚C] 80 100 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.001 2021-10-25 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-VCSL Vertical Cavity surface emitting Laser ORDER CODE 159353850A6300 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 5/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 W3 T E1 D0 W1 close to center B0 N A W E2 F D B C Top Cover Tape D1 A P1 W2 T1 A0 T2 End Start Feeding direction Carrier Tape Cover Tape detail B B Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm Polarity Mark Packaging is referred to the international standard IEC 60286-3:2019 Tape Type Tolerance Value 2a A0 (mm) typ. 3,80 B0 (mm) typ. 3,80 W (mm) +0,3/ -0,1 12,00 T (mm) ref. 0,28 T1 (mm) ref. 0,10 T2 (mm) typ. 2,00 K0 (mm) typ. 1,80 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 8,00 P2 (mm) ±0,05 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) min. 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 10,25 F (mm) ±0,05 5,50 Material Qty. (pcs.) Polystyrene 500 165° - 180° B (mm) min. 1,50 C (mm) typ. 13,00 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 12,40 W2 (mm) max. 18,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.001 2021-10-25 DIN ISO 2768-1m W3 (mm) min. 11,90 W3 (mm) max. 15,40 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width Tolerance Value A (mm) ± 2,0 178,00 12 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-VCSL Vertical Cavity surface emitting Laser ORDER CODE 159353850A6300 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 6/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³