875115952001

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: + 1,9 - 0,9 ±0,2 Properties 0,35 -0,05 3,1 ±0,2 2,8 Test conditions Capacitance C Rated Voltage VR Surge Voltage VS 0.25 V/ 120 Hz/ +20 °C Value Unit Tol. 6.8 µF ±20% 100 V (DC) max. 1000 cycles @ 20 °C 115 V (DC) max. Leakage Current ILeak 2 min./ +20 °C 136 µA max. Dissipation Factor DF 0.25 V/ 120 Hz/ +20 °C 12 % max. 1500 mA max. 48 mΩ max. Ripple Current IRIPPLE 100 kHz @ 105 °C ESR RESR 0.25 V/ 100 kHz/ +20 °C 4,2 O 8,0 ±0,5 8,7 ±0,3 0,3 max. Scale - 3:1 Schematic: General Information: q 8,3 ±0,2 Aluminum Polymer Capacitors Operating Temperature -55 up to +105 °C Storage Conditions (in original packaging) 5 °C up to + 35 °C; 10 % up to 75 % RH Endurance 2000 h Moisture Sensitivity Level (MSL) 1 Test conditions of electrical properties: +20 °C, 35 % RH if not specified differently FIT according to separate documentation Surge Voltage: charging time 30 s, discharging time 330 s for a cycle Scale - 3:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 001.001 2023-02-06 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-PSHP Aluminum Polymer Capacitors PSEE0876R8M100DVCTEB000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 8.0 x 8.7 eiCap Valid 1/9 ORDER CODE 875115952001 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Component Marking: 1st Line Capacitance Value: 6.8 µF ( Coding: 6R8 ) 2nd Line WCAP-PSHP & datecode: YWW 3rd Line Rated Voltage:100 V(DC) Lifetime Performance: Test Conditions Endurance Moisture Resistance Lifetime 2000 h @ 105 °C 1000 h, stored @ 60 °C , RH 90~95 % Voltage VR applied None Current None None ∆C ≤ ±20 % of initial measured value ≤ ±20 % of initial measured value ESR ≤ 150 % of the initial specified value ≤ 150 % of the initial specified value DF ≤ 150 % of the initial specified value ≤ 150 % of the initial specified value Leakage Current ≤ the initial specified value ≤ the initial specified value Multiplier for Ripple Current vs. Frequency Frequency 120 Hz ≤ freq. < 1 kHz 1 kHz ≤ freq. < 10 kHz 10 kHz ≤ freq. < 100 kHz 100 kHz ≤ freq. < 300 kHz Muliplier 0.05 0.3 0.7 1.0 Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 001.001 2023-02-06 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-PSHP Aluminum Polymer Capacitors PSEE0876R8M100DVCTEB000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 8.0 x 8.7 eiCap Valid 2/9 ORDER CODE 875115952001 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 P2 W3 T E1 D0 A N W B D B0 E2 F W1 close to center C Top Cover Tape A0 P1 K0 T1 W2 T2 End Start Feeding direction Carrier Tape detail B Cover Tape Cover Tape Chip Cavity B No Component min. 160mm Components No Component min. 100mm Sprocket Hole Embossment Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 Tape Type Tolerance Value 2a A0 (mm) ±0,2 8,70 B0 (mm) ±0,2 8,70 W (mm) ±0,3 24,00 T (mm) ±0,05 0,40 T1 (mm) max. 0,10 T2 (mm) ±0,2 11,00 K0 (mm) typ. 10,84 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 16,00 P2 (mm) ±0,05 2,00 D0 (mm) ±0,1 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 22,25 F (mm) ±0,1 11,50 Material Qty. (pcs.) Polystyrene 500 165° - 180° Pull-off force Tape width 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com Tolerance Value A (mm) ± 2,0 380 B (mm) ± 0,5 2 C (mm) ± 0,5 15 D (mm) ± 0,8 21 N (mm) min. 80 W1 (mm) ± 1,0 26 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 001.001 2023-02-06 DIN ISO 2768-1m W2 (mm) ± 1,0 32 W3 (mm) ± 1,0 26 Material Paper PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-PSHP Aluminum Polymer Capacitors PSEE0876R8M100DVCTEB000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 8.0 x 8.7 eiCap Valid 3/9 ORDER CODE 875115952001 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Inner Carton: [mm] Packaging Specification - Outer Carton: [mm] W H C H IC IC L IC W L C Tolerance Value LIC (mm) typ. 400,00 WIC (mm) typ. 390,00 HIC (mm) typ. 106,00 No. of Reel (pcs.) 3 Qty. (pcs.) 1500 Material Paper Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com Tolerance Value LC (mm) typ. 425,00 WC (mm) typ. 412,00 HC (mm) typ. 340,00 C No. of Inner Carton (pcs.) Qty. (pcs.) Material 3 4500 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 001.001 2023-02-06 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-PSHP Aluminum Polymer Capacitors PSEE0876R8M100DVCTEB000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 8.0 x 8.7 eiCap Valid 4/9 ORDER CODE 875115952001 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³