IS2412SA

3 Watts IS Series • • • • • • • Regulated Single Output SIP Package 1000 VDC Isolation Optional 3000 VDC Isolation DC-DC xppower.com Continuous Short Circuit Protection Non-conductive Black Plastic Case MTBF >1.1 MHrs Specification Input Input Voltage Range • Nominal ±10% Input Current (no load) • See table Input Reflected Ripple • 20 mA pk-pk through 12 µH inductor, 5 Hz to 20 MHz Input Voltage No Load Input Current 100 100 100 100 100 120 60 60 60 60 60 60 30 30 30 30 30 30 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Output Voltage 3.3 5.0 9.0 12.0 15.0 24.0 3.3 5.0 9.0 12.0 15.0 24.0 3.3 5.0 9.0 12.0 15.0 24.0 V V V V V V V V V V V V V V V V V V Output Current 600 600 333 250 200 125 600 600 333 250 200 125 600 600 333 250 200 125 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Efficiency 53% 62% 67% 70% 68% 64% 55% 60% 67% 69% 70% 68% 54% 61% 65% 70% 71% 71% Model Number(1) IS0503SA IS0505SA IS0509SA IS0512SA IS0515SA IS0524SA IS1203SA IS1205SA IS1209SA IS1212SA IS1215SA IS1224SA IS2403SA IS2405SA IS2409SA IS2412SA IS2415SA IS2424SA 5V Output Output Voltage Minimum Load Line Regulation Load Regulation • • • • See table No minimum load required ±0.5% max ±0.5% max (0% to full load) ±1.5% for 3.3 V versions ±2% max 75 mV pk-pk (20 MHz bandwidth) ±0.02%/°C Continuous with auto recovery 470 µF 12 V Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Short Circuit Protection • Maximum Capacitive • Load 24 V Mechanical Details 1.26 (32.00) 0.32 (8.00) Printed Face 0.55 (14.00) 0.13 (3.40) 123 General Efficiency Isolation Voltage Isolation Capacitance Switching Frequency MTBF • • • • • See table 1000 VDC (3000 VDC -H option) 60 pF 50 kHz typical >1.1 MHrs to MIL-STD 217F 0.02 (0.50) 0.10 (2.54) 1.10 (27.94) 0.12 (3.05) 0.13 (3.40) 0.10 (2.50) Environmental Operating Temperature Storage Temperature Case Temperature 0.55 Cooling (14.00) Derating Humidity -25 °C to +70 °C 1.26 (32.00) -40 °C to +125 °C Printed Face +100 °C max Convection-cooled Derate from 100% load at +70 °C to 0% load at +85 °C 0.12 (3.05) • Up to 90%, non-condensing 0.10 • • • • • (2.54) 1.10 (27.94) 0.32 (8.00) 0.13 (3.40) 123 0.03 (0.68) 9 10 11 12 0.01 (0.25) 0.10 (2.50) 0.02 (0.50) 0.02 (0.50) 0.13 (3.40) Notes 1. Add suffix ‘-H’ to model number for 3000 VDC isolation. 2. All dimensions in inches (mm). Pin 1 2 3 9 10 11 12 Standard ‘H’ Versions +Vin +Vin N.C. -Vin N.C. N.C. N.C. N.C. -Vout -Vout +Vout +Vout -Vin N.C. 03-Dec-07