ISB0148D12

ISB01 Series DC-DC Converter XP Power 1 Watt xxx Series • Regulated Single & Dual Output • 2:1 Input Range • Compact SMD Package • 1500 VDC Isolation • Operating Temperature -40 °C to +95 °C • Remote On/Off • Tape & Reel Package Available • Optional Water Washable Versions • 3 Year Warranty Dimensions: ISB01: 0.74 x 0.68 x 0.34” (18.9 x 17.2 x 8.7 mm) Models & Ratings Input voltage Output voltage Output current Input current(1,2) No load Full load Maximum Reflected ripple capacitive load(3) current Efficiency Model number(4) 5V 200 mA 256 mA 1680 μF 78% ISB0105S05 12 V 83 mA 252 mA 820 μF 79% ISB0105S12 15 V 67 mA 248 mA 680 μF ±12 V ±42 mA 255 mA ±15 V ±33 mA 5V 200 mA 12 V 83 mA 15 V 67 mA ±12 V 4.5-9V 81% ISB0105S15 ±470 μF 79% ISB0105D12 248 mA ±330 μF 80% ISB0105D15 105 mA 1680 μF 79% ISB0112S05 105 mA 820 μF 79% ISB0112S12 102 mA 680 μF ±42 mA 104 mA ±15 V ±33 mA 5V 200 mA 12 V 83 mA 15 V 67 mA ±12 V 9-18V 40 mA 82% ISB0112S15 ±470 μF 81% ISB0112D12 103 mA ±330 μF 80% ISB0112D15 53 mA 1680 μF 79% ISB0124S05 51 mA 820 μF 82% ISB0124S12 51 mA 680 μF ±42 mA 51 mA ±15 V ±33 mA 5V 200 mA 12 V 83 mA 15 V 67 mA ±12 V ±15 V 18-36V 36-75V 20 mA 80 mA 10 mA 40mA 82% ISB0124S15 ±470 μF 82% ISB0124D12 50 mA ±330 μF 82% ISB0124D15 26 mA 1680 μF 79% ISB0148S05 26 mA 820 μF 80% ISB0148S12 26 mA 680 μF ±42 mA 26 mA ±33 mA 25 mA 7 mA 30mA 20mA 80% ISB0148S15 ±470 μF 81% ISB0148D12 ±330 μF 81% ISB0148D15 Notes 1. Input currents measured at nominal input voltage. 2. Input current is typically 2.5 mA at nominal input voltage when output is remotely turned off. 3. Maximum capacitive load is per output. 4. For optional water washable version, add suffix ‘-P’ e.g. ISB0112S12-P. Mechanical Details 0.74 (18.9) 0.60 (15.24) 0.5 (12.7) 0.1 (2.54) 9 14 8 Top View 1 2 6 0.04 (1.0) 1 7 0.54 (13.7) 0.68 (17.2) 0.33 (8.45) 0.01 (0.25) S 0.04 (1.1) 0.6 (15.0) Seating Plane 0.15 S 0.10 (2.54) www.xppower.com 0.73 (18.6) 0.54 (13.7) 0.64 (16.15) 0~ 4 0.1 (1.8) 0.06 (1.6) 0.10 (2.45) ISB01 Series DC-DC Converter XP Power Input Characteristic Input Voltage Range Input Filter Minimum Typical Maximum Units 9 9.0 18 18.0 36 36.0 75 5 V nominal 48 V nominal 15 5 V nominal VDC 12 V nominal 24 V nominal Internal Capacitor 25 Input Surge 50 VDC for 1 s 100 Remote On/Off Notes & Conditions 4.5 12 V nominal 24 V models 48 V models Output is ON if Remote On/Off (Pin 2) is open. Output is OFF if 2-4 mA is applied to Remote On/Off (Pin 2) via 1 kΩ resistor. Output Characteristic Minimum Maximum Units Notes & Conditions 30 VDC See Models and Ratings table Initial Set Accuracy ±1.0 % Output Voltage Balance ±1.0 % For dual output with balanced laods A No minimum load required Output Voltage Typical 5 Minimum Load Line Regulation ±0.2 % Load Regulation ±1.0 % Cross Regulation ±5.0 % 5 % deviation 75 mV pk-pk Transient Response 3 Ripple & Noise On dual output models when one load is varied between 25% and 100% and other is fixed at 100% Short Circuit Protection Recovery within 1% in less than 250 μs for a 25% load change. 20 MHz bandwidth. Measured using 0.47 μF ceramic capacitor. Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ ˚C Maximum Units General Characteristic Minimum Efficiency Isolation: Input to Output Isolation Resistance Typical 80 VDC 109 Ω Switching Frequency Mean Time Between Failure Weight 60 s/1 s At 500 VDC 50 pF kHz 5.8 W/in3 220 Power Density Notes & Conditions See Models and Ratings table 1500/1800 Isolation Capacitance Moisture Sensitivity Level % 2.8 MHrs 0.01 (4.5) lb (g) Level 2 MIL-HDBK-217F, +25 °C GB IPC/JEDEC J-STD-020D.1 Environmental Characteristic Maximum Units Notes & Conditions Operating Temperature Minimum -40 Typical +95 °C See Derating Curve. Storage Temperature -55 +125 °C Case Temperature +95 °C Humidity 95 %RH Cooling Case Flammability Non-condensing Natural convection UL 94V-0 Rated Non conductive black plastic Lead-Free Reflow Solder Process IPC/JEDEC J-STD-020D.1 www.xppower.com 2 ISB01 Series DC-DC Converter XP Power Safety Approvals Safety Agency Safety Standard Notes & Conditions CB IEC60950-1 Information Technology UL UL/cUL60950-1, UL/cUL62368-1 Information Technology CE Meets all applicable directives UKCA Meets all applicable legislation EMC: Emissions Phenomenon Standard Test Level Conducted EN55022 Class A Notes & Conditions Mechanical Details Connecting Pin Pattern 0.74 (18.9) 0.60 (15.24) 0.5 (12.7) 0.1 (1.8) 0.1 (2.54) 9 14 8 Top View 1 6 2 0.54 (13.7) 0.68 (17.2) 7 0.73 (18.6) 0.54 (13.7) 0.64 (16.15) 0.04 (1.0) 0.06 (1.6) 0.10 (2.54) 0.33 (8.45) 0.04 (1.1) 0.01 (0.25) 0.6 (15.0) Seating Plane 0~ 4 S 0.15 S 0.10 (2.45) Pin Connections Pin 1 2 6 7 8 9 14 Single -Vin Remote On/Off No Connection No Connection +Vout -Vout +Vin Dual -Vin Remote On/Off Common -Vout +Vout Common +Vin Application Notes Derating Curve Output Power (%) 100 0 -40 75 95 Ambient Temperature (°C) Notes 1. All dimensions are in inches (mm) 2. Weight: 0.01 lbs (4.5 g) approx. 3 3. Tolerance: X.XX±0.01 (X.X±0.25) X.XXX±0.005 (X.XX±0.13) 4. Pin Tolerance: ±0.002 (±0.05) www.xppower.com 23 Sept 2021