JTK3048S05

JTK30 Series DC-DC Converter XP Power 30 Watts xxx Series • Single and Dual Outputs • 1” x 1” Footprint • -40 °C to +100 °C Operation • Full Load at 55 °C Ambient • 1600 VDC Isolation • Output Trim ±10% • Remote On/Off • MTBF 370 kHrs • 3 Year Warranty Dimensions: JTK30: 1.0 x 1.0 x 0.43” (25.4 x 25.0 x 10.9 mm) Models & Ratings Input Voltage Output Voltage Input Current(1) Output Current No Load Full Load OVP setting Efficiency Max. capacitive load(2) Model Number(3) JTK3024S3V3 3.3 V 7.0 A 10 mA 1095 mA 3.9 V 88% 10000 μF 5.0 V 6.0 A 10 mA 1405 mA 6.2 V 89% 7200 μF JTK3024S05 12.0 V 2.5 A 10 mA 1405 mA 15.0 V 89% 1200 μF JTK3024S12 15.0 V 2.0 A 10 mA 1375 mA 18.0 V 91% 1000 μF JTK3024S15 ±12.0 V ±1.25 A 10 mA 1405 mA ±15.0 V 89% ±750 μF JTK3024D12 ±15 V ±1.0 A 10 mA 1375 mA ±18.0 V 91% ±500 μF JTK3024D15 3.3 V 7.0 A 8 mA 540 mA 3.9 V 89% 10000 μF 5V 6.0 A 8 mA 695 mA 6.2 V 90% 7200 μF JTK3048S05 12 V 2.5 A 8 mA 695 mA 15.0 V 90% 1200 μF JTK3048S12 15 V 2.0 A 8 mA 680 mA 18.0 V 92% 1000 μF JTK3048S15 ±12 V ±1.25 A 8 mA 695 mA ±15.0 V 90% ±750 μF JTK3048D12 ±15 V ±1.0 A 8 mA 685 mA ±18.0 V 91% ±500 μF JTK3048D15 9-36 V 18-75 V JTK3048S3V3 Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. 3. Add suffix ‘-HK’ for optional heatsink. Mechanical Details 0.1 (2.54) Top View 0.4 (10.16) 4 6 5 0.8 (20.32) 3 2 1.0 (25.4) 1 0.1 (2.54) 0.6 (15.24) Bottom View 1 0.2 (5.08) 0.1 (2.54) 0.5 (0.02) 0.41 (10.4) 1 1.0 (25.4) 0.66 (16.8) 2 Dia 0.04 (1.0) DIA 0.04 (1.0) 1.0 (25.4) 3 0.3 (7.62) 0.1 (2.54) 0.24 (6.0) Notes 1. All dimensions are in inches (mm) 2. Weight: 0.042 lbs (19 g) approx. 3. Pin diameter: 0.04±0.002 (1.0±0.05) Optional Heatsink (-HK) 6 5 4 1.0 (25.4) 0.4 (10.16) 4. Pin pitch tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) www.xppower.com Pin 1 2 3 4 5 6 Pin Connections Single Dual +Vin +Vin -Vin -Vin Remote On/Off Remote On/Off +Vout +Vout Trim Common -Vout -Vout JTK30 Series DC-DC Converter XP Power Input Characteristic Input Voltage Range Minimum Maximum Units Notes & Conditions 9 Typical 36 VDC 24 V nominal 18 75 VDC 48 V nominal Input Reflected Ripple Current 30 mA pk-pk Through 12 μH inductor and 47 μF capacitor 50 VDC for 100 ms 24 V models 100 VDC for 100 ms 48 V models Maximum Units Notes & Conditions 30 VDC See Models and Ratings table Input Surge Output Characteristic Minimum Output Voltage 3.3 Output Trim ±10 Typical Initial Set Accuracy Minimum Load ±1 0 % Single Output Versions % At full load % No minimum load required From minimum to maximum input at full load Line Regulation ±0.5 % Load Regulation 0.5/1.0 % From 0% to full load for single/dual output ±5 % On dual output models, when one output is at 100% load and other is varied from 25% load to full load 75/60 mV pk-pk Cross Regulation Ripple & Noise Overload Protection 170 % Short Circuit Protection Trip and Restart (hiccup), with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ ˚C Overvoltage Protection Remote On/Off Single output with 10 μF/25 V X7R MLCC on output Dual output with 10 μF/25 V X7R MLCC on each output measured using 20 MHz bandwidth See Models and Ratings table Output is on if remote on/off (pin 3) is open Output turns off if remote on/off (pin 3) is low (