JTM2024S05

DC-DC 20 Watts xppower.com JTM Series • Wide 4:1 Input Range • Single & Dual Outputs • -40 °C to +105 °C Operating Temperature • Overvoltage & Overcurrent Protection • Remote On/Off • 1600 VDC Isolation • 3 Year Warranty Specification Input Input Voltage Range Input Current Undervoltage Lockout Input Surge General • 24 V (9-36 VDC) 48 V (18-75 VDC) • See table • 24 V models: ON 8.6 V, OFF 7.9 V typical 48 V models: ON 17.8 V, OFF 16 V typical • 24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms Output Output Voltage Output Voltage Trim Minimum Load Line Regulation Load Regulation • • • • • Cross Regulation Setpoint Accuracy Start Up Time Ripple & Noise • • • • Transient Response • See table ±10%, single outputs No minimum load required ±0.5% max Single output models: ±0.5% max Dual output models: ±1% max balanced outputs ±5% for dual outputs (see note 2) ±1% 20 ms typical 75 mV pk-pk at 20 MHz bandwidth, (see note 3) 3% max deviation, recovery to within 1% in 120% of full load typical Short Circuit Protection • Trip & restart (hiccup mode), auto recovery Remote On/Off • On = Logic High (3.0-12.0 V) or Open Off = Logic Low (