U1D

  RoHS U1A THRU U1J  COMPLIANT   Surface Mount Ultra Fast Recovery Rectifier Features ● Low profile package ● Ideal for automated placement ● Glass passivated chip junction ● High forward surge capability ●Super Fast reverse recovery time ● Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Typical Applications For use in high frequency rectification of power supplies, inverters, converters, and freewheeling diodes for consumer and telecommunication. Mechanical Data ● Package: SOD-123FL Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant, halogen-free ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: Cathode line denotes the cathode end ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Device marking code U1A U1B U1C U1D U1F U1G U1H U1J U1A U1B U1C U1D U1F U1G U1H U1J 50 100 150 200 300 400 500 600 VRRM V IO A 1.0 Surge(non-repetitive)forward current @ 60Hz Half-sine wave,1 cycle, Ta=25℃ IFSM A 30 Storage temperature Tstg ℃ -55~+150 Junction temperature Tj ℃ -55 ~ +150 Repetitive peak reverse voltage Average rectified output current @60Hz sine wave, Resistance load, TL (FIG.1) ■Electrical Characteristics（Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT TEST CONDITIONS Maximum instantaneous forward voltage drop per diode VF V IFM=1.0A Maximum reverse recovery time TRR ns IF=0.5A,IR=1.0A, Irr=0.25A IRRM μA Maximum DC reverse current at rated DC blocking voltage per diode @ VRM=VRRM U1A U1B U1C U1D U1F 0.92 1.25 25 U1G U1H U1J 1.7 35 Ta=25℃ 5 Ta=100℃ 50 1/5 S-S1284 Rev. 1.3, 03-Jan-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com   U1A THRU U1J    ■Thermal Characteristics （Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT U1A U1B U1C U1D RθJ-A(1) Typical Thermal resistance U1F U1G U1H U1J 651) ℃/W RθJ-L(1) 221) Note： (1) Thermal resistance between junction and ambient and between junction and lead mounted on P.C.B with 3mm*3mm copper pad areas. ■ Characteristics (Typical) Instantaneous Forward Current (A) 0 Peak Forward Surge Current (A) 30 60Hz Resistive or Inductive Load P.C.B. Mounted on (3.0mm×3.0mm)Copper Pad Areas 0.20   FIG.2: Forward Surge Current Capability FIG.1: Io-TL Cure   1.40     1.20   1.00     0.80   0.60     0.40   0 30 60 90 120 24 8.3ms Single Half Sine Wave JEDEC Method 18 12 6 0 150 Lead Temperature(℃)     100       10     1 2 4 6 8 10 20 40 60 80 100 Number of Cycles FIG.3: Typical Forward Characteristics FIG.4: Typical Reverse Characteristics 100 Instantaneous Reverse Current (uA) Average Forward Output Current(A)   U1F-U1G U1A-U1D 1.0 U1H-U1J 0.1 0.01 0.4 10 1.0 0.1 Ta=25℃ 0.01 0.001 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Ta=125℃ 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) 2/5 S-S1284 Rev. 1.3, 03-Jan-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com   U1A THRU U1J    FIG.5: Diagram of circuit and Testing wave form of reverse recovery time 10 Ω NONINDUCTIVE 50 Ω NONINDUCTIVE trr +0.5A (-) (+) DUT 0 PULSE GENERATOR (NOTE2) (-) 1Ω NONINDUCTIV OSCILLOSCOPE (NOTE1) -0.25A (+) NOTES: 1.Rise Time=7ns max .Inpot Impedance=1M Ω 22pf 2.Rise Time=10ns max.Sourse Impedance=50Ω -1.0A 1cm SET TIME BASE FOR 5/10ns/cm ■Ordering Information (Example) PREFERED P/N PACKING CODE UNIT WEIGHT(g) MINIMUM PACKAGE(pcs) INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE U1A THRU U1J  F1 Approximate 0.0169 3000 15000 120000 7” reel U1A THRU U1J  F2 Approximate 0.0169 2500 12500 100000 7” reel U1A THRU U1J  F3 Approximate 0.0169 10000 30000 210000 13” reel U1A THRU U1J  F4 Approximate 0.0169 3000 27000 108000 7” reel U1A THRU U1J  F5 Approximate 0.0169 10000 20000 160000 13” reel U1A THRU U1J  F6 Approximate 0.0169 3000 12000 60000 7” reel ■ Outline Dimensions SOD-123FL SOD-123FL A B D C E F H Dim Min Max A 1.60 1.90 B 0.90 1.10 C 2.55 2.85 D 3.60 3.90 E 1.00 1.20 F 0.40 0.90 G 0.10 0.25 H 0.02 0.05 G Dimensions in millimeters 3/5 S-S1284 Rev. 1.3, 03-Jan-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com   U1A THRU U1J    ■ Suggested pad layout SOD-123FL P2 Q1 Q2 Dim Millimeters P1 3.90 P2 1.90 Q1  1.00 Q2  1.50 P1 Dimensions in millimeters 4/5 S-S1284 Rev. 1.3, 03-Jan-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com   U1A THRU U1J    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 5/5 S-S1284 Rev. 1.3, 03-Jan-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com