V810ME06

V810ME06 PHASE NOISE (1 Hz BW, typical) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: applications@zcomm.com Rev A1 -50 -60 -70 £(f) (dBc/Hz) Voltage-Controlled Oscillator Surface Mount Module Applications • Portable Radios • PCS • Downconvertors Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering -80 -90 -100 -110 -120 -130 -140 -150 1000 10000 100000 1000000 OFFSET (Hz) Performance Specifications Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW) Harmonic Suppression (2nd) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance Pushing Pulling (14 dB Return Loss, Any Phase) Operating Temperature Range Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) Additional Notes Min 760 Typ -107 -17 Max 860 -14 4.5 Units MHz dBc/Hz dBc Vdc MHz/V dBm pF MHz/V MHz °C 0.5 36 -3 -1 50 1 50 1 1 0 MINI-14S-L Min Typ 2 14 75 Max 20 Units Vdc mA LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module Tuning Curve, typ. V810ME06 Rev A1 900 FREQUENCY (MHz) 850 800 75 °C 25 °C 0 °C 750 700 650 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 TUNING VOLTAGE (Vdc) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. POWER OUTPUT (dBm) 5 4 3 2 1 0 -1 -2 -3 -4 -5 680 700 720 740 760 780 800 820 840 860 880 0.030 MIN. CUTBACK FROM LIVE PADS FREQUENCY (MHz) 75 °C 25 °C 0 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE MINI-14S MINI-14S-L H 0.220 0.130 MINI-14S-LOW 0.160 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B