V910ME01_10

V910ME01 PHASE NOISE (1 Hz BW, typical) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: applications@zcomm.com Rev C3 Applications • Microwave Radios • Satellite Communications • Direct Broadcast Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering £(f) (dBc/Hz) Voltage-Controlled Oscillator Surface Mount Module OFFSET (Hz) Performance Specifications Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW) Harmonic Suppression (2nd) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance Pushing Pulling (14 dB Return Loss, Any Phase) Operating Temperature Range Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) Additional Notes Min 3930 Typ -85 -14 Max 4200 -12 11 Units MHz dBc/Hz dBc Vdc MHz/V dBm pF MHz/V MHz °C 1.5 40 -2 1 50 4 50 10 12 -35 MINI-14S-L Min Typ 5 15 80 Max 19 Units Vdc mA LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module Tuning Curve, typ. 4300 4250 V910ME01 Rev C3 FREQUENCY (MHz) 4200 4150 4100 4050 4000 3950 3900 3850 3800 3750 0 1 2 3 4 5 6 7 8 9 10 11 80 °C 25 °C -35 °C TUNING VOLTAGE (Vdc) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 6 5 4 3 2 1 0 -1 -2 -3 3796 3863 3915 3962 4005 4045 4083 4121 4158 4197 4236 4277 POWER OUTPUT (dBm) SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS FREQUENCY (MHz) 80 °C 25 °C -35 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE MINI-14S MINI-14S-L H 0.220 0.130 MINI-14S-LOW 0.160 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B