AZ956P1S-15DE

AZ956P MICROMINIATURE POLARIZED BISTABLE (LATCHING) RELAY FEATURES • Microminiature size: up to 50% less board area than previous generation telecom relays • Meets FCC Part 68.302 1500 V lightning surge • High dielectric and surge voltage: • Low power consumption: 36 mW pickup • Stable contact resistance for low level signal switching • Epoxy sealed • UL, CUR file E43203 • All plastics meet UL94 V–O, 30 min. oxygen index CONTACTS Arrangement Ratings SPDT (1 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 30 W or 60 VA Max. switched current: 1.0 A Max. switched voltage: 150 VDC or 125 VAC Rated Load UL, CUR Material Resistance 0.5 A at 120 VAC 1.0 A at 30 VDC Palladium nickel with gold-rhodium overlay < 50 milliohms initally (6 V, 10 mA method) GENERAL DATA Life Expectancy Mechanical Electrical Set Time (typical) Reset Time (typical) Bounce (typical) Dielectric Strength (at sea level) Insulation Resistance Ambient Temperature Operating Storage Vibration 0.5 W at 20°C (68°F) At nominal coil voltage 8°C (15°F) Max. 105°C (221°F) Max. Solvent Temp. Max. Immersion Time Weight Enclosure Terminals Shock Max. Solder Temp. Temp./Time Minimum operations 1 x 109 2.5 x 105 at 0.4 A, 125 VAC, resistive 3 x 106 at 1.0 A, 24 VDC, resistive 1 ms at nominal coil voltage 0.9 ms at nominal coil voltage At 10 mA contact current 1 ms at set or reset 1500 Vrms contact to coil 500 Vrms between open contacts 109 ohms min. at 25°C, 500 VDC, 50% RH At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Operational, 40 g, 10–200 Hz Operational, 50 g min., 11 ms Non-destructive, 150 g min., 11 ms Vapor phase: 215°C, 40 Sec. Infrared: 215°C, 40 Sec. Double wave: 260°C, 10 Sec. 80°C (176°F) 30 seconds 1.8 grams P.B.T. polyester Tinned copper alloy, P.C. COIL (Polarized) Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 36 mW NOTES 1. All values at 20°C (68°F). 2. Relay may set or reset in with less than “Must Operate” value. 3. Relay has fixed coil polarity. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-06-13 Junkersstrasse 3, D-82178 Puchheim, Germany AZ956P AZ RELAY ORDERING DATA STANDARD SINGLE COIL Nominal Coil VDC 1.5 3 5 9 12 15 24 Nominal Coil VDC 1.5 3 5 9 12 15 Max. Operating VDC 6 13 20 35 50 50 50 Max. Operating VDC 4.25 8.55 14.75 25.60 29.00 29.00 Coil Resistance ± 10% 61 300 740 2,160 4,500 4,500 4,500 Coil Resistance ± 10% 32 130 390 1,200 1,500 1,500 Must Operate VDC 1.13 2.25 3.75 6.75 9.00 11.30 18.00 Must Operate VDC 1.13 2.25 3.75 6.75 9.00 11.30 Order Number THT Through Hole AZ956P1–1.5DE AZ956P1–3DE AZ956P1–5DE AZ956P1–9DE AZ956P1–12DE AZ956P1–15DE AZ956P1–24DE THT Through Hole AZ956P2–1.5DE AZ956P2–3DE AZ956P2–5DE AZ956P2–9DE AZ956P2–12DE AZ956P2–15DE SMT AZ956P1S–1.5DE AZ956P1S–3DE AZ956P1S–5DE AZ956P1S–9DE AZ956P1S–12DE AZ956P1S–15DE AZ956P1S–24DE STANDARD DUAL COIL Order Number SMT AZ956P2S–1.5DE AZ956P2S–3DE AZ956P2S–5DE AZ956P2S–9DE AZ956P2S–12DE AZ956P2S–15DE MECHANICAL DATA THT SMT .006 (.15) .08 MAX (2) PC BOARD LAYOUT Viewed toward terminals PC BOARD LAYOUT Viewed toward terminals Wiring Diagram Viewed toward terminals Single Coil Latching Shown in reset Position Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" Dual Coil Latching Shown in reset position ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-06-13 Junkersstrasse 3, D-82178 Puchheim, Germany