AZ956S-24DE

AZ956 MICROMINIATURE POLARIZED RELAY FEATURES • Microminiature size: up to 50% less board area than previous generation telecom relays • Meets FCC Part 68.302 1500 V lightning surge • Low power consumption: 36 mW pickup • Stable contact resistance for low level signal switching • Epoxy sealed • UL, CUR file E43203 • All plastics meet UL94 V–O, 30 min. oxygen index CONTACTS Arrangement Ratings SPDT (1 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 30 W or 60 VA Max. switched current: 1.0 A Max. switched voltage: 150 VDC or 125 VAC Rated Load UL, CUR Material Resistance 0.5 A at 120 VAC 1.0 A at 30 VDC Palladium nickel with gold-rhodium overlay < 50 milliohms initally (6 V, 10 mA method) GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Bounce (typical) Dielectric Strength (at sea level) Dropout Minimum operations 1 x 109 2.5 x 105 at 0.4 A, 125 VAC, resistive 3 x 106 at 1.0 A, 24 VDC, resistive 1 ms at nominal coil voltage 0.4 ms at nominal coil voltage (with no coil suppression) At 10 mA contact current 1 ms at operate or release 1500 Vrms contact to coil 500 Vrms between open contacts Greater than 10% of nominal coil voltage 109 ohms min. at 25°C, 500 VDC, 50% RH At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Operational, 40 g, 10–200 Hz Operational, 50 g min., 11 ms Non-destructive, 150 g min., 11 ms Vapor phase: 215°C, 40 Sec. Infrared: 215°C, 40 Sec. Double wave: 260°C, 10 Sec. 80°C (176°F) 30 seconds 1.8 grams P.B.T. polyester Tinned copper alloy, P.C. COIL (Polarized) Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 36 mW 0.5 W at 20°C (68°F) Insulation Resistance Ambient Temperature Operating Storage Vibration At nominal coil voltage 8°C (15°F) Max. 105°C (221°F) Shock Max. Solder Temp. Temp./Time Max. Solvent Temp. Max. Immersion Time Weight Enclosure Terminals NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Relay has fixed coil polarity. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-06-13 Junkersstrasse 3, D-82178 Puchheim, Germany AZ956 RELAY ORDERING DATA STANDARD RELAYS Nominal Coil VDC 1.5 3 5 9 12 15 24 Max. Continuous VDC THT SMT 4.5 4.0 8.8 14.5 25.5 35.0 42.0 50.0 8.0 13.3 23.9 35.0 42.0 50.0 Coil Resistance ± 10% THT SMT 36 28 137 370 1,165 2,250 3,100 4,500 113 313 1,013 1,800 2,813 4,500 Must Operate VDC 1.13 2.25 3.75 6.75 9.00 11.30 18.00 Order Number THT Through Hole AZ956–1.5DE AZ956–3DE AZ956–5DE AZ956–9DE AZ956–12DE AZ956–15DE AZ956–24DE SMT AZ956S–1.5DE AZ956S–3DE AZ956S–5DE AZ956S–9DE AZ956S–12DE AZ956S–15DE AZ956S–24DE MECHANICAL DATA THT SMT PC BOARD LAYOUT Viewed toward terminals PC BOARD LAYOUT Viewed toward terminals Wiring Diagram Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-06-13 Junkersstrasse 3, D-82178 Puchheim, Germany