AZ963-1A-24DE

AZ963 SPDT SUBMINIATURE POWER RELAY FEATURES • • • • • • • 4 kV dielectric strength, 5 kV surge Proof tracking index (PTI/CTI) 250 6 Amp switching 10 A version (1 Form A) upon request Epoxy sealed UL, CUR file E43203 VDE file 40011689 CONTACTS Arrangement Ratings SPDT (1 Form C) SPST (1 Form A and 1 Form B) Resistive load: Max. switched power: 180 W or 1500 VA Max. switched current: 6A Max. switched voltage: 220 VDC* or 380 VAC * Note: If switching voltage is greater than 30 VDC, GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 6 A 250 VAC Res. 6 ms at nominal coil voltage 4 ms at nominal coil voltage (with no coil suppression) special precautions must be taken. Please contact the factory. Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Surge Voltage Coil to contact Insulation Resistance Insulation (according to DIN VDE 0110, IEC 60664-1) Dropout Ambient Temperature Operating Storage 5,000V (at 1.2x50 µs) 1000 megohms min. at 20°C 500 VDC 50% RH C250 Overvoltage category: III Pollution degree: 2 Nominal voltage: 250 VAC Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–50 Hz 20 g operating, 100 g damage P.B.T. polyester Tinned copper alloy, P. C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 5 grams 20 per plastic tube / 1000 per carton box Rated Load UL, CUR 6 A at 250 VAC, Resistive 6 A at 24 VDC, Resistive 5 A at 250 VAC, Resistive [1] 4 A at 250 VAC, Resistive [2] Silver nickel [1] or silver tin oxide [2]