GP15A THRU GP15M
SINTERED GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Amperes
D TENTE PA
DO-204AC
FEATURES
1.0(25.4) MIN.
0.140(3.6) 0.104(2.6) DIA.
* * * * * *
0.300(7.6) 0.230(5.8)
GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 o 1.5 Amperes operation at TA=55 C with no thermal runaway Typical IR less than 0.1uA o High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0
1.0(25.4) MIN.
0.034(0.86) 0.028(0.71) DIA.
MECHANICAL DATA
Case : JEDEC DO-204AC molded plastic over glass body Terminals : Plated axial leads , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.015 ounes , 0.4 gram
*Dimensions in inches and (millimeters)
TM
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=55 C Peak forward surge current 8.3ms single half sine-wave IFSM superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.5 A Maximum DC reverse current at rated DC blocking voltage TA=25 C o TA=125 C o TA=150 C
o o o
GP15 A
50 35 50
B
100 70 100
D
200 140 200
G
400 280 400
J
600 420 600
K
800 560 800
M
1000 700 1000
UNITS Volts Volts Volts Amps
VRRM VRMS VDC I (AV)
1.5
50
Amps
VF
1.0 5 50 100 20 45 20 -65 to +175
Volts
IR
uA
Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction and storage temperature range
CJ R R
JA JL
pF
o
C/W
o
TJ,TSTG
C
NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted.
REV. : 0
Zowie Technology Corporation
RATINGS AND CHARACTERISTIC CURVES GP15A THRU GP15M
FIG.1 - FORWARD CURRENT DERATING CURVE 1.50 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.25 1.00 0.75 0.50 0.25
0.375" (9.5mm) LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD
FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 PEAK FORWARD SURGE CURRENT, AMPERES
TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
40
30
20
10
0 0 25 50 75 100 125
o
0 150 175 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE, C
FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 100
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
PULSE WIDTH=300uS 1% DUTY CYCLE
1.00
10
1
0.10
TJ=125 C TJ=150 C
o
o
0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 110 PERCENT OF RATED PEAK REVERSE VOLTAGE,%
200
JUNCTION CAPACITANCE, pF
TRANSIENT THERMAL IMPEDANCE( C/W)
FIG.5 - TYPICAL JUNCTION CAPACITANCE
TJ = 25 C
o
FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100
100 60 40
20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS
o
10
1
0.1 0.01
0.10
1.0
10
100
t , PULSE DURATION, sec
REV. : 0
Zowie Technology Corporation
很抱歉,暂时无法提供与“GP15K”相匹配的价格&库存,您可以联系我们找货
免费人工找货