GP20J

GP20A THRU GP20M SINTERED GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes D TENTE PA DO-204AC FEATURES 1.0(25.4) MIN. 0.140(3.6) 0.104(2.6) DIA. * * * * * * 0.300(7.6) 0.230(5.8) GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 o 2.0 Amperes operation at TA=55 C with no thermal runaway Typical IR less than 0.1uA o High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 1.0(25.4) MIN. 0.034(0.86) 0.028(0.71) DIA. MECHANICAL DATA Case : JEDEC DO-204AC molded plastic over glass body Terminals : Plated axial leads , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.015 ounes , 0.4 gram *Dimensions in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=55 C Peak forward surge current 8.3ms single half sine-wave IFSM superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 2.0 A TA=25 C o TA=125 C o TA=150 C o o o GP20 A 50 35 50 B 100 70 100 D 200 140 200 G 400 280 400 J 600 420 600 K 800 560 800 M 1000 700 1000 UNITS Volts Volts Volts Amps VRRM VRMS VDC I (AV) 2.0 65 Amps VF 1.0 5 30 80 25 25 10 -65 to +175 Volts Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) IR uA CJ R R JA JL pF o C/W o Operating junction and storage temperature range TJ,TSTG C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES GP20A THRU GP20M FIG.1 - FORWARD CURRENT DERATING CURVE 3.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.5 2.0 1.5 1.0 0.5 0.375" (9.5mm) LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 PEAK FORWARD SURGE CURRENT, AMPERES TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 80 60 40 20 0 0 25 50 75 100 125 o 10 150 175 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS PULSE WIDTH=300uS 1% DUTY CYCLE 1.00 10 1 0.10 TJ=125 C TJ=150 C o o 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 110 200 JUNCTION CAPACITANCE, pF TRANSIENT THERMAL IMPEDANCE( C/W) FIG.5 - TYPICAL JUNCTION CAPACITANCE TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p o FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 o 10 1 20 40 100 0.1 0.01 0.10 1.0 10 100 REVERSE VOLTAGE, VOLTS t , PULSE DURATION, sec REV. : 0 Zowie Technology Corporation