LIN-11HAW1

Linear Position Sensors LIN Sensors – Kit with magnet Thin, programmable, non-contact magnetic position sensors with dual outputs available Description The LIN Series sensors are non-contact linear position sensors with one or two independent outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to a linear displacement of the actuator magnet. The included actuator magnet is specifically paired to the sensor and is required to assure proper operation. Other magnets may yield less than optimal performance. Features Typical Applications                Easy setup and robust monitoring with M4 screws Dual independent (redundant) outputs assure high reliability Custom programming available for: range, slope, PWM output No mechanical interface means no parts to wear out or jam Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector RoHS Compliant IP68* Suitable for wide air gap applications Compliant to industrial/automotive EMC/EMI/ESD directives Hydraulic valves Hydraulic controls Electric drives Pneumatic controls Zero-contact encoder alternative Gear selection / shifting position Environmental Specifications Operating Temperature Ingress Protection -40 ⁰C to 140 ⁰C (-40 ⁰F to 284 ⁰F) IP68* *Contact ZF for details on testing conditions Electrical Specifications Input Supply Voltage 5.0 VDC ± 10% Output Signal Input Current Resolution Accuracy, overall Output Linearity Maximum Overvoltage 16 VDC 0.5 – 4.5 VDC (with nominal input) Single output Dual output 12 bit ±2% Full scale ±1%Full scale Mechanical Specifications Measuring Range Air Gap** Maximum Magnet Misalignment Up to 45 mm 4.5 mm (0.18”) 2 mm (0.08”) **Output is calibrated to meet spec within air gap shown; any variation will affect performance www.cherryswitches.com Page 1 of 2 Last update 2016-07-12; specifications subject to change without notice. Reverse Battery Protection 12 VDC 8 mA typ., 10 mA max. 16 mA typ., 20 mA max. Products Part Number LIN-11HAW1 Output Analog single LIN-21HAW1 Analog dual Typical Output vs. Linear Displacement (as percentage of input) Dimensions mm (inches) www.cherryswitches.com Page 2 of 2 Last update 2016-07-12; specifications subject to change without notice. Interface 20 AWG x 305 mm (12") discrete wires 20 AWG x 305 mm (12") discrete wires