ISMART43340-C

ISMART IoT EVB User’s Manual ISMART Inventek Systems Module ARduino Test IoT Evaluation Board User’s Manual 802.11a/b/g/n/ac + BT/BLE DOC-DS-201904 www.Inventeksys.com Page 1 Inventek Systems ISMART IoT EVB User’s Manual Contents 1 Definitions............................................................................................................................... 3 2 Introduction ............................................................................................................................. 4 2.1 ORDERING INFORMATION ........................................................................................... 5 2.2 ISMART IoT EVB Overview ............................................................................................. 5 2.3 ISMART IoT EVB Hardware Features .............................................................................. 6 3 System Requirements.............................................................................................................. 7 3.1 ISMART EVB Configuration for UART interface option ................................................. 7 4 The ISAFE– Arduino Pin Out Map ........................................................................................ 8 5 ISAFE EVB Schematics ......................................................................................................... 9 5.1 USB Schematic ................................................................................................................... 9 5.2 FTDI Schematic ................................................................................................................ 10 6 Temp Rating.......................................................................................................................... 11 7 Revision Control ................................................................................................................... 11 8 Contact Information .............................................................................................................. 12 DOC-DS-201904 www.Inventeksys.com Page 2 Inventek Systems ISMART IoT EVB User’s Manual 1 Definitions eS-WiFi: embedded Serial Wi-Fi • Inventek’s “modular” wireless product offering (Radio + MCU + Certified Antenna). These modules consist of 802.11a/b/g/n/ac Wi-Fi radios and combinations of these radios with BT/BLE. • All eS-WiFi module options support the same foot print enabling customers to migrate across the entire eS-WiFi portfolio without requiring any changes to the customer’s original PCB design. • eS-WiFi modules include antenna certifications for Chip, Etched, and u.fl antennas. IWIN: Inventek Systems Wireless Interoperability Network: • Inventek’s proprietary AT Command SW. o All associated collateral and documentation can be found at ▪ https://www.inventeksys.com/iwin/getting-started-guide/ • Requires a Host processor to communicate to the eS-WiFi module serially. • Video References: o Inventek Systems 802.11 b/g/n Serial to Wi-Fi & IWIN AT Introduction: ▪ https://www.youtube.com/watch?v=Tq2-CYm-c8Q o Inventek Systems 802.11 b/g/n Serial to Wi-Fi & IWIN AT Command Set Tutorial: ▪ https://www.youtube.com/watch?v=tkPOLaNAKHo o Inventek 802.11 b/g/n Serial to Wi-Fi Product Overview & AT Command Set Tutorial: ▪ https://www.youtube.com/watch?v=Mzmi-0DcUu0 ISMART: Inventek Systems Module ARduino Test IoT Evaluation Board • Arduino form factor/footprint, no Arduino driver support. • No additional hardware is required other than a PC to use the ISMART evaluation board. • Please Note: The three-way switch on the ISMART evaluation board must be in the position closest to the Wi-Fi module (Position 1, UART USB), and use a USB cable to plug the ISMART evaluation board into your PC. DOC-DS-201904 www.Inventeksys.com Page 3 Inventek Systems ISMART IoT EVB User’s Manual 2 Introduction The Inventek ISMART (Inventek Systems Module Arduino Test) IoT evaluation board platform is a user-friendly Arduino form factor compliant evaluation board suited for all of your wireless application needs. Please note that there is no Arduino software provided for this IoT development board. The ISMART IoT evaluation board enables customers to quickly launch IoT products based on Inventek’s eS-WiFi (embedded Serial Wi-Fi), portfolio of 802.11a/b/g/n/ac WiFi radios and combinations of those radios with BT/BLE, a Host MCU and certified chip, etched or u.fl antenna options. The ISMART IoT evaluation board is also supported by Inventek’s IWIN (Inventek Wireless Interoperability Network), firmware which provides customers a robust user friendly AT command set to simplify and accelerate IoT design and development. IWIN enables customers to quickly get a Wi-Fi connected application up and running. The ISMART IoT evaluation board plugs directly onto any target Arduino compatible MCU/CPU/Sensor Development Board offering. The ISMART IoT evaluation board also supports complete HW & SW IoT platform projects for various MCU requirements. Examples of the ISMART IoT MCU Reference Design Projects include Infineon’s XMC4500 MCUs, ST Micro’s STM32F MCUs, Analog Devices’ Shark DSP and CUP360 MCUs, and Cypress PSoC MCUs. In addition, the ISMART IoT MCU Reference Design Projects also support third party Cloud applications such as AWS. For more information on complete ISMART IoT MCU Reference Design Projects, please visit: ➢ www.inventeksys.com ➢ AT Command Support ➢ IoT MCU Reference Designs The ISMART IoT Evaluation Board User’s Manual provides a detailed hardware and software requirements overview as well as all required board connections. DOC-DS-201904 www.Inventeksys.com Page 4 Inventek Systems ISMART IoT EVB User’s Manual 2.1 ORDERING INFORMATION ISMART EVB EVALUATION BOARD DESCRIPTION ISMART43362 2.4G Wi-Fi, Cortex™ M3 ISMART43903 2.4G Wi-Fi, Cortex™ R4 ISMART4343 2.4G Wi-Fi + BT/BLE, Cortex™M4 ISMART43340 2.4G/5G Wi-Fi + BT/BLE, Cortex™M4 NOTE: • • • eS-WiFi Module ORDERING P/N ETCHED/CHIP ANTENNA OPTION ORDERING P/N U.FL ANTENNA OPTION ISM43362-M3G-L44 ISM43903-R48-L54 ISM4343-WBM-L54 ISM43340-M4G-L44 ISMART43362E-EVB ISMART43903C-EVB ISMART4343C-EVB ISMART43340C-EVB ISMART43362U-EVB ISMART43903U-EVB ISMART4343U-EVB ISMART43340U-EVB All ISMART EVBs are configured for the UART interface option. For SPI support, please download the appropriate SPI FW update from Inventek’s website, www.inventeksys.com Please reference your target eS-WiFi module of choice Data Sheet for additional information. 2.2 ISMART IoT EVB Overview NOTE: • • • • The L44/L54 foot print compatible option for Inventek’s eS-WiFi modules enables customers to migrate across Inventek’s portfolio as needed without requiring any changes to a customer’s original PCB layout, enabling maximum flexibility as future connectivity design requirements change. The ISMART IoT EVB is a 3.3V board not a 5V board (5V input & generates 3.3V IO The ISMART Mini USB connects to the Dual Port FTDI (Backside of EVB) The ISMART UART Position Switch selects the required UART connection o Please reference Section 4, The ISMART – Arduino Pin Out Map for all details. DOC-DS-201904 www.Inventeksys.com Page 5 Inventek Systems ISMART IoT EVB User’s Manual 2.3 ISMART IoT EVB Hardware Features • The ISMART EVB is a 3.3v board, not a 5v board. The ISAFE EVB takes 5v in but generates 3.3v IO. • FCC/CE/IC Certification is included with all eS-WiFi options including Etched, Chip or u.fl antenna options. • Configurable using Inventek IWIN AT Commands FW. • Host interface: UART, SPI. • Input Power: 5.0 V • Dual Port FTDI for firmware development and testing. • SPI Flash for Over The Air (OTA) updates • All eS-WiFi module portfolio also support a standard L44/L54 package option to enable customers to migrate between eS-WiFi module options once in mass production without customers having to make any board layout changes to their original PCB. • Please note that there is no Arduino software provided for the ISMART IoT development board. DOC-DS-201904 www.Inventeksys.com Page 6 Inventek Systems ISMART IoT EVB User’s Manual 3 System Requirements 3.1 ISMART EVB Configuration for UART interface option The ISMART EVB communication is configured using a PC over USB for all evaluation and test purposes. 1. Set-Up: a. Download and install the eS-WiFi PC Demo: i. https://www.inventeksys.com/iwin/demo-software/ b. Run eS-WiFi PC Demo and Install Drivers: i. Menu > Install Drivers c. Set the Power source for the ISMART EVB by placing a jumper on J17 from Pin 1 to Pin 2 d. Set SW3 to Position 1, UART_USB (i.e.: Closest to eS-WiFi module) e. Connect PC to the ISMART EVB using the Mini USB connector f. Configure Serial Port: i. Setup > Serial Port > Configure/Open ii. In the Serial Port Config window: • Select Serial Port • Baud rate: 115,200 • Parity None • Data Width 8 • Stop Bits 1 g. You are now ready to type IWIN AT Commands in to the Terminal window i. IWIN AT Commands Quick Reference Guide can be found at: ii. https://www.inventeksys.com/iwin/wpcontent/uploads/WiFi_AT_Command-_Set-Quick-Reference-1.pdf DOC-DS-201904 www.Inventeksys.com Page 7 Inventek Systems ISMART IoT EVB User’s Manual 4 The ISAFE– Arduino Pin Out Map DOC-DS-201904 www.Inventeksys.com Page 8 Inventek Systems ISMART IoT EVB User’s Manual 5 ISAFE EVB Schematics 5.1 USB Schematic DOC-DS-201904 www.Inventeksys.com Page 9 Inventek Systems ISMART IoT EVB User’s Manual 5.2 FTDI Schematic DOC-DS-201904 www.Inventeksys.com Page 10 Inventek Systems ISMART IoT EVB User’s Manual 6 Temp Rating Symbol TA Description Temperature(ambient) MIN 0 TYP MAX 70 UNIT °C NOTE: Functionality is guaranteed, but specifications require derating at extreme temperatures 7 Revision Control Document: ISMART IoT User’s Manual External Release Evaluation Board DOC-DS-201904 Date 4/1/19 Author AS Revision 1.0 Comment Preliminary Release 4/10/19 AS 2.0 Draft Release 4/19/19 AS 3.0 Release DOC-DS-201904 www.Inventeksys.com Page 11 Inventek Systems ISMART IoT EVB User’s Manual 8 Contact Information Inventek Systems 2 Republic Road Billerica MA, 01862 Tel: 978-667-1962 Sales@inventeksys.com www.inventeksys.com Copyright 2017, Inventek Systems. All Rights Reserved. This software, associated documentation and materials ("Software"), referenced and provided with this documentation is owned by Inventek Systems and is protected by and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty provisions. Therefore, you may use this Software only as provided in the license agreement accompanying the software package from which you obtained this Software ("EULA"). If no EULA applies, Inventek Systems hereby grants you a personal, non-exclusive, non-transferable license to copy, modify, and compile the Software source code solely for use in connection with Inventek’ s integrated circuit products. Any reproduction, modification, translation, compilation, or representation of this Software except as specified above is prohibited without the express written permission of Inventek. Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Inventek reserves the right to make changes to the Software without notice. Inventek does not assume any liability arising out of the application or use of the Software or any product or circuit described in the Software. Inventek does not authorize its products for use in any products where a malfunction or failure of the Inventek product may reasonably be expected to result in significant property damage, injury, or death ("High Risk Product"). By including Inventek’ s product in a High-Risk product, the manufacturer of such system or application assumes all risk of such use and in doing so agrees to indemnify Inventek against all liability. Inventek Systems reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. The information contained within is believed to be accurate and reliable. However, Inventek does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. DOC-DS-201904 www.Inventeksys.com Page 12 Inventek Systems