ACL700

2 FOOT TESTER. introducing the first dedicated dual footwear station, offering repeatable checks on both right and left feet at the same time. Simply stand on the two stainless steel foot prints, and push the "Press to test" button. High bright LED's indicate one of the following: High fail, Pass, or Low fail, depending on the resistance of your shoes, heel straps, or toe straps an independent measurement is taken simultaneously of both right and left feet at the same time. Other footwear stations can only measure one foot at a time, or the combined resistance of both feet. The two foot tester reduces footwear testing time by half, and offers the operator a visual and audible measurement of pass or fail of both feet before entering the EPA. The tester is powered by a 9 volt PP3 Alkaline battery, or (9 volt DC mains power supply not included). Features Red high/low fail & green pass LED's for both RIGHT & LEFT feet. Yellow Battery low LED. Test range is between .9-35 megOhms. The factory set resistance can be altered in accordance to your country resistance specific