PNIS-06V

PNI PNICONNECTOR CONNECTOR 2.0 2.0mm mmpitch/Disconnectable pitch/DisconnectableCrimp Crimpstyle stylewire-to-wire wire-to-wireconnectors connectors PNI PNICONNECTOR CONNECTOR Specifications This connector is a 2.0 mm pitch wire-to-wire connector, having incomplete mating prevention mechanism. ● Inertial lock structure ● Finger-friendly design ● Secure locking structure ● Mountable on a variety of panels ● Secondary retainer ® • Current rating: 3 A AC/DC (AWG #22) • Voltage rating: 100 V AC/DC • Temperature range: -25℃ to +85℃ (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 15 mΩ max. After environmental tests/ 25 mΩ max. • Insulation resistance: 1,000 MΩ min. • Withstanding voltage: 800 VAC/minute • Applicable wire: AWG #28 to #22 • Applicable panel thickness: 0.5 to 2.0 mm * In using the products,refer to "Handling Precautions for Terminals and Connectors" described on our website (Technical documents of Product information page). * RoHS2 compliance * Dimensional unit: mm * Contact JST for details. Standards ® ® Recognized E60389 ® ® Panel layout and Assembly layout ●Without panel locks (21.35) D ±0.05 7.65 ●With panel locks (21.35) Note: C and D dimensions: Refer to receptacle housing. 1 4.65 ±0.05 +0.1 0 C +0.1 0 PNI CONNECTOR Contact ●Socket contact 1.6 0.5 ●Pin contact 7.5 PNI CONNECTOR 3.9 3 1.5 13.5 0.5 2.4 2.08 2.85 Pin contact Socket contact Applicable wire AWG # mm2 Model No. SPNI-001T-P0.5 SPNI-002T-P0.5 Insulation O.D. (mm) Q’ty/ reel 0.13 ～ 0.33 26 ～ 22 1.0 ～ 1.5 9,000 0.08 ～ 0.21 28 ～ 24 0.9 ～ 1.5 9,000 SPND-001T-C0.5 SPND-002T-C0.5 0.13 ～ 0.33 0.08 ～ 0.22 Insulation O.D. (mm) Q’ty/ reel 1.0 ～ 1.5 8,000 26 ～ 22 28 ～ 24 8,000 0.8 ～ 1.5 Material and Finish Material and Finish Copper alloy, tin-plated (reflow treatment) Copper alloy, tin-plated (reflow treatment) RoHS2 compliance Contact Contact Applicable wire AWG # mm2 Model No. RoHS2 compliance Applicator Applicator Crimping Crimping machine machineCrimp applicator Dies CrimpCrimp applicator with with diesdies Crimp applicator Dies applicator SPNI-001T-P0.5 SPNI-001T-P0.5 AP-K2N AP-K2N SPNI-002T-P0.5 SPNI-002T-P0.5 MKS-L MKS-L Contact Contact Applicator Applicator Crimping Crimping machine machineCrimp applicator Dies Crimp applicator withwith diesdies Crimp applicator Dies Crimp applicator SPAL001-05 MK/SPAL-001-05 APLMK SPAL001-05 SPND-001T-C0.5 MK/SPAL-001-05APLMK SPND-001T-C0.5 AP-K2N AP-K2N SPAL002-05 MK/SPAL-002-05 APLMK SPAL002-05 SPND-002T-C0.5 MK/SPAL-002-05APLMK SPND-002T-C0.5 Note: Contact JST for fully automatic crimping applicator. MKS-L MKS-L MK/SPND-001-05　 SPND001-05 MK/SPND-001-05　 APLMK APLMK SPND001-05 MK/SPAD/ND-002-05 SPAD/ND002-05 MK/SPAD/ND-002-05APLMK APLMK SPAD/ND002-05 Note: Contact JST for fully automatic crimping applicator. Receptacle housing (for pin contact) Without panel locks 2 A H JST B 19.3 Model No. No. of circuits Without panel locks With panel locks 2 PNIRR-02VF PNIRR-02V 3 PNIRR-03VF PNIRR-03V 4 PNIRR-04VF PNIRR-04V 5 PNIRR-05VF PNIRR-05V 6 PNIRR-06VF PNIRR-06V 8 PNIRR-08VF PNIRR-08V 10 PNIRR-10VF PNIRR-10V A Dimensions (mm) B C D Q’ty/ bag - 6.0 6.4 9.7 1,000 4.0 8.0 8.4 11.7 1,000 6.0 10.0 10.4 13.7 500 8.0 12.0 12.4 15.7 500 10.0 14.0 14.4 17.7 500 14.0 18.0 18.4 21.7 500 18.0 22.0 22.4 25.7 500 Material and Finish Circuit No.1 PA 66, UL94V-0, natural (white) RoHS2 compliance Note: C and D dimensions: Panel layout dimensions With panel locks 19.3 2 B H JST A (3.2) (6.3) Circuit No.1 2 PNI CONNECTOR Socket housing (for socket contact) No. of circuits 2 4 B 2 2 3 1 5 6 10.05 6.45 Circuit No.1 8 10 Model No. PNIRP-02V-S PNIRP-03V-S PNIRP-04V-S PNIRP-05V-S PNIRP-06V-S PNIRP-08V-S PNIRP-10V-S Dimensions (mm) A B Q’ty/ bag - 5.7 1,000 4.0 7.7 1,000 6.0 9.7 1,000 8.0 11.7 1,000 10.0 13.7 1,000 14.0 17.7 1,000 18.0 21.7 1,000 Dimensions (mm) A B Q’ty/ bag - 6.3 1,000 4.0 8.3 1,000 6.0 10.3 1,000 8.0 12.3 1,000 10.0 14.3 1,000 14.0 18.3 1,000 18.0 22.3 1,000 Material and Finish B RoHS2 compliance 1 2 2 A 3 Glass-filled PBT, UL94V-0, natural (white) 6.45 10.05 Circuit No.1 B 1 2 2 A 3 4 6.45 10.05 Circuit No.1 B 1 2 2 3 A 4 5 6.45 10.05 Circuit No.1 Retainer No. of circuits 2 2 3 4 5 A B 6 8 10 Model No. PNIS-02V PNIS-03V PNIS-04V PNIS-05V PNIS-06V PNIS-08V PNIS-10V Material and Finish Glass-filled PA 66, UL94V-0, natural (ivory) 2.25 3 7 RoHS2 compliance