10NF53

GN 420 Hollow Knurled Nuts Technopolymer Plastic, with Steel or Stainless Steel Tapped Through Insert Inch | Metric Inch table Dimensions in: inches - millimeters 1 d1 d2 d3 d4 h k Length l    8 x 32   .35  9   .47 12   .75 19   .55 14   .31  8   .35  9    10 x 24   .35  9   .47 12   .75 19   .55 14   .31  8   .35  9   1/4 x 20   .47 12   .55 14   .94 24   .65 16.5   .37  9.5   .41 10.5 5/16 x 18   .55 14   .63 16  1.18 30   .77 19.5   .43 11   .45 11.5   3/8 x 16   .63 16   .71 18  1.42 36   .89 22.5   .49 12.5   .55 14 Thread Steel Metric table Dimensions in: millimeters - inches 1 d1 Thread d2 d3 d4 h k Length l Steel Stainless steel NI M 4 -  9   .35 12   .47 19   .75 14   .55  8   .31  9   .35 M 5 M 5  9   .35 12   .47 19   .75 14   .55  8   .31  9   .35 M 6 M 6 12   .47 14   .55 24   .94 16.5   .65  9.5   .37 10.5   .41 M 8 M 8 14   .55 16   .63 30  1.18 19.5   .77 11   .43 11.5   .45 M 10 - 16   .63 18   .71 36  1.42 22.5   .89 12.5   .49 14   .55 Specification 2 Information • Plastic Technopolymer (Polyamide PA) -- Temperature resistant up to 248 °F (120 °C) -- Black, shiny finish On clamping applications, the partially protruding steel / stainless steel insert of the GN 420 hollow knurled nuts prevents chipping of the plastic. • Tapped insert -- Steel, zinc plated, blue passivated finish — -- Stainless steel NI European Standard No. 1.4305 (AISI 303) • Knurled Nuts EN 590.5 (Stainless Steel Insert) • RoHS compliant see also... • Knurled Nuts EN 590 • Hollow Knurled Nuts GN 420 with Loss Protection GN 111.7 How to order (Steel) 1 GN 420-10X24 How to order (Stainless steel) 1 2 GN 420-M6-NI 120 | 2.2 Tensioning, Clamping with Knobs 1 Thread d1 1 Thread d1 2 Material www.jwwinco.com | phone: 1-800-877-8351