5TX32/K

DIN 6336 Star Knobs Cast Iron / Stainless Steel / Aluminum with Tapped or Plain Bore, or Blank Type Inch | Metric 4 Type A B C D E Specification 1 5 • Cast iron GG -- Fettled and tumbled — -- Zinc plated, blue passivated finish ZB (only available in Type D and E in metric sizes) • Stainless steel precision casting NI (only available in Type A, D, E) European Standard No. 1.4308 (AISI CF-8) Matte shot-blasted finish Blank type With plain through bore, tol. H7 With plain blind bore, tol. H7 With tapped through bore With tapped blind bore Information see also... • Star Knobs DIN 6336 (Plastic) • Star Knobs GN 6336.1 (Phenolic Plastic, with Protruding Hub) • Star Knobs GN 6336.2 (Technopolymer Plastic, with Protruding Hub) • Star Knobs DIN 6336 with Loss Protection GN 111.7 • Aluminum, forged AL -- Matte, tumbled finish MT Flash mark not visible (only available in Type A, C, D, E) -- Polished finish PL (only available in Type C, D, E in metric sizes) • RoHS compliant On request • Powder coated • Special inch or metric bores, threads, set screw holes, cross pin holes, drilled and pinned threaded studs and stud tips How to order (Blank type) 1 2 4 DIN 6336-AL-50-A How to order (Inch, cast iron) 1 2 3 4 DIN 6336-GG-63-1/2X13-E How to order (Metric, aluminum) 1 2 3 4 5 DIN 6336-AL-40-B8-C-PL 2 | 2.2 Tensioning, Clamping with Knobs 1 Material 2 Handle diameter d1 4 Type 1 Material 2 Handle diameter d1 3 Thread d 2 (Bore d 3 ) 4 Type 1 Material 2 Handle diameter d1 3 Bore d 3 (Thread d 2 ) 4 Type 5 Finish www.jwwinco.com | phone: 1-800-877-8351 DIN 6336 Star Knobs continued Inch table Dimensions in: inches - millimeters 2 3 d1 d2 d 3 +0.001 3 Bore Type B / Type C d4 h1 h 2 min. h3 h 4 min. GG NI AL Thread Type D / Type E Type A Type A 1.26 32 1.26 32 - 1/4 x 20 - B 1/4 - 0.47 12 0.79 20 0.35 9 0.83 21 1.57 40 1.57 40 1.57 40 5/16 x 18 - B 5/16 - 0.55 14 0.98 25 0.47 12 1.97 50 1.97 50 1.97 50 5/16 x 18 3/8 x 16 B 5/16 B 3/8 0.71 18 1.26 32 2.48 63 2.48 63 2.48 63 3/8 x 16 - - - 0.79 20 2.48 63 2.48 63 2.48 63 1/2 x 13 - B 3/8 B 1/2 3.15 80 - 3.15 80 1/2 x 13 5/8 x 11 B 1/2 B 5/8 t1 t2 GG / AL NI 0.39 10 0.47 12 0.47 12 0.39 10 1.02 26 0.51 13 0.59 15 0.59 15 0.51 13 0.59 15 1.34 34 0.67 17 0.71 18 0.71 18 0.63 16 1.57 40 0.75 19 1.65 42 0.83 21 0.87 22 0.71 18 0.79 20 0.79 20 1.57 40 0.75 19 1.65 42 0.83 21 0.87 22 0.87 22 0.79 20 0.98 25 1.97 50 0.91 23 2.05 52 0.98 25 1.10 28 - 0.79 20 Type B, C, D, E Type B, C, D, E Metric table 2 3 d1 Dimensions in: millimeters - inches 3 d2 d 3 H7 GG NI AL Thread Type D / Type E Bore Type B / Type C Type A Type A 32 1.26 32 1.26 - M 6 - B 6 - 12 0.47 20 0.79 9 0.35 21 0.83 40 1.57 40 1.57 40 1.57 M 8 - B 8 - 14 0.55 25 0.98 12 0.47 50 1.97 50 1.97 50 1.97 M 8 M 10 B 8 B 10 18 0.71 32 1.26 63 2.48 63 2.48 63 2.48 M 10 - - - 20 0.79 63 2.48 63 2.48 63 2.48 M 12 - B 10 B 12 80 3.15 - 80 3.15 M 12 M 16 B 12 B 16 www.jwwinco.com | phone: 1-800-877-8351 d4 h1 h 2 min. h3 h 4 min. t1 t2 GG / AL NI 10 0.39 12 0.47 12 0.47 10 0.39 26 1.02 13 0.51 15 0.59 15 0.59 13 0.51 15 0.59 34 1.34 17 0.67 18 0.71 18 0.71 16 0.63 40 1.57 19 0.75 42 1.65 21 0.83 22 0.87 18 0.71 20 0.79 20 0.79 40 1.57 19 0.75 42 1.65 21 0.83 22 0.87 22 0.87 20 0.79 25 0.98 50 1.97 23 0.91 52 2.05 25 0.98 28 1.10 - 20 0.79 Type B, C, D, E Type B, C, D, E 2.2 Tensioning, Clamping with Knobs | 3