83692464

Fastening element KEG/K ball bearing B A with SH and V-ZLT-70 PRODUCT INFORMATION SPECIFICATIONS The KEG-K is used wherever cables or lines exit from the cable protection conduit. The type KEG-K ball joint, which can be installed into the SH system holder easily and quickly, is the optimum fit for cords, cables and conduit throughputs; especially because its integratable strain relief is freely configurable Type Order No. Colour to the needs of the application. The KEG-K is the ideal connection of the Murrflex cable protection conduit to the SH system holder. The cables are sealed and strain is relieved at the same time. Suitable for Murrflex Suitable for System holder Mod. polyamide -40 – 110 °C i.a.w. UL94 V0 Version A mm B mm Pack qty. KEG/K-M25 83692458 Black M25/P21 SH-P / M25-M32 separable 46.50 48.50 1 KEG/K-M32 83692460 Black M32/P29 SH-P / M25-M32 separable 46.50 48.50 1 KEG/K-M40 83692462 Black M40/P36 SH-P / M40-M50 separable 70.00 67.00 1 KEG/K-M50 83692464 Black M50/P48 SH-P / M40-M50 separable 70.00 67.00 1 KEG/K-56 83692466 Black NW56 SH 56/70 separable 100.50 122.40 1 KEG/K-70 83692468 Black NW70 SH 56/70 separable 100.50 122.40 1 KEG/K-80 sw1) 83692470 Black NW80 SH 80/95 separable 126.00 170.00 1 KEG/K-95 sw 83692472 Black NW95 SH 80/95 separable 126.00 170.00 1 1) 1) 1) 1) Tightening torque 1.5Nm Mod. polyamide THERMAL PROPERTIES Temperature / temperature range -40 – 110 °C FIRE BEHAVIOUR Fire classification i.a.w. UL94 V0 TECHNICAL INFORMATION Halogen-free 1 C mm © Murrplastik Systemtechnik GmbH • proID_96561~20180828~890283~aur_kug_keg_k Fastening element KEG/K ball bearing CONFORMITY RoHS (EC Directive 2011/65/EC) APPROVALS AND OPERATING PERMITS ROBI approval Made in Germany All details given in our sales brochures and catalogues, as well as the information available online, are based on our current knowledge of the products described. The electronic data and files made available by Murrplastik, particularly CAD files are based on our current knowledge of the product described. A legally binding assurance of certain properties or the suitability for a certain purpose can not be determined from this information. All information with respect to the chemical and physical properties of Murrplastik products, as well as application advice given verbally, in writing or by tests, is given to the best of our knowledge. This does not free the purchaser of carrying out their own inspections and tests in order to determine the suitability of a product for a specific purpose. Murrplastik accepts no responsibility for the available information being up-to-date, correct or complete. Neither do we accept responsibility for the quality of this information. Murrplastik accepts no liability for damage caused as a result of using our products. Murrplastik reserves the right to make technical changes and improvements through constant further development of products and services. 2 Our General Terms and Conditions apply. © Murrplastik Systemtechnik GmbH • proID_96561~20180828~890283~aur_kug_keg_k