L26-T EVB User Guide
GNSS Module Series
Rev. L26-T_EVB_User_Guide_V1.0
Date: 2019-11-21
Status: Released
www.quectel.com
GNSS Module Series
L26-T EVB User Guide
Our aim is to provide customers with timely and comprehensive service. For any
assistance, please contact our company headquarters:
Quectel Wireless Solutions Co., Ltd.
Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District,
Shanghai, China 200233
Tel: +86 21 5108 6236
Email: info@quectel.com
Or our local office. For more information, please visit:
http://www.quectel.com/support/sales.htm
For technical support, or to report documentation errors, please visit:
http://www.quectel.com/support/technical.htm
Or email to: support@quectel.com
GENERAL NOTES
QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION
PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT
TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT
MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT
ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR
RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO
CHANGE WITHOUT PRIOR NOTICE.
COPYRIGHT
THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF QUECTEL
WIRELESS SOLUTIONS CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION AND
EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN
WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL
RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY
MODEL OR DESIGN.
Copyright © Quectel Wireless Solutions Co., Ltd. 2019. All rights reserved.
L26-T_EVB_User_Guide
1 / 22
GNSS Module Series
L26-T EVB User Guide
About the document
History
Revision
Date
Author
Description
1.0
2019-11-21
Brooke WANG
Initial
L26-T_EVB_User_Guide
2 / 22
GNSS Module Series
L26-T EVB User Guide
Contents
About the document ................................................................................................................................... 2
Contents ....................................................................................................................................................... 3
Table Index ................................................................................................................................................... 4
Figure Index ................................................................................................................................................. 5
1
Introduction .......................................................................................................................................... 6
1.1. Safety Information ....................................................................................................................... 6
2
General Overview ................................................................................................................................. 7
2.1. Top view of L26-T EVB................................................................................................................ 7
2.2. L26-T EVB & Kit Accessories...................................................................................................... 8
2.3. EVB and Accessories Assembly ................................................................................................. 9
3
Interface Applications ....................................................................................................................... 10
3.1. Micro-USB Interface .................................................................................................................. 10
3.2. Antenna Interface ...................................................................................................................... 10
3.3. Switches and Buttons ............................................................................................................... 11
3.4. Operation Status Indication LEDs ............................................................................................. 12
3.5. Test Points ................................................................................................................................. 12
4
EVB Operation Procedures ............................................................................................................... 14
4.1. Communication via Micro-USB Interface .................................................................................. 14
4.2. Firmware Download .................................................................................................................. 15
4.2.1. Firmware Download in Normal Working Mode .............................................................. 15
4.2.2. Firmware Download in Boot Download Mode ............................................................... 16
5
Usage of Teseo-Suite Pro ................................................................................................................. 17
5.1. View the GNSS Receiver Status ............................................................................................... 17
5.1.1. COM Port and Baud Rate Setting .................................................................................. 17
5.1.2. Explanations of Views and Windows ............................................................................. 19
5.2. Send PSTM Commands ........................................................................................................... 20
6
Appendix A Reference....................................................................................................................... 21
L26-T_EVB_User_Guide
3 / 22
GNSS Module Series
L26-T EVB User Guide
Table Index
TABLE 1: INTERFACES OF L26-T EVB ............................................................................................................. 7
TABLE 2: LIST OF ACCESSORIES .................................................................................................................... 9
TABLE 3: SWITCHES AND BUTTONS .............................................................................................................. 11
TABLE 4: OPERATION STATUS INDICATION LEDS ....................................................................................... 12
TABLE 5: PIN DESCRIPTION ........................................................................................................................... 13
TABLE 6: RELATED DOCUMENTS .................................................................................................................. 21
TABLE 7: TERMS AND ABBREVIATIONS ........................................................................................................ 21
L26-T_EVB_User_Guide
4 / 22
GNSS Module Series
L26-T EVB User Guide
Figure Index
FIGURE 1: TOP VIEW OF L26-T EVB ................................................................................................................ 7
FIGURE 2: L26-T EVB & KIT ACCESSORIES .................................................................................................... 8
FIGURE 3: L26-T EVB AND ACCESSORIES ASSEMBLY ................................................................................. 9
FIGURE 4: MICRO-USB CONNECTOR ........................................................................................................... 10
FIGURE 5: ANTENNA CONNECTOR ............................................................................................................... 10
FIGURE 6: SWITCHES AND BUTTONS ........................................................................................................... 11
FIGURE 7: OPERATION STATUS INDICATION LEDS .................................................................................... 12
FIGURE 8: TEST POINTS - J104...................................................................................................................... 12
FIGURE 9: USB PORTS ................................................................................................................................... 14
FIGURE 10: COM PORT SETTING OF QCOM ................................................................................................ 14
FIGURE 11: STA808X/9X FIRMWARE UPGRADE TOOL CONFIGURATIONS .............................................. 15
FIGURE 12: TESEOIII XLOADER TOOL CONFIGURATIONS FOR FIRMWARE UPGRADE ........................ 16
FIGURE 13: TESEO-SUITE PRO TOOL INTERFACE ..................................................................................... 17
FIGURE 14: MANUAL CONFIGURATION THE COM PORT ........................................................................... 18
FIGURE 15: SIGNAL LEVEL ............................................................................................................................. 19
FIGURE 16: SKY VIEW ..................................................................................................................................... 19
FIGURE 17: MODULE POSITIONING FORM .................................................................................................. 20
FIGURE 18: COMMAND SENDING VIA TESEO-SUITE PRO ......................................................................... 20
L26-T_EVB_User_Guide
5 / 22
GNSS Module Series
L26-T EVB User Guide
1
Introduction
This user guide describes detailed information about the usage of Quectel L26-T EVB (Evaluation
Board), the auxiliary for engineers to develop and test Quectel L26-T module.
1.1. Safety Information
The following safety precautions must be observed during all phases of operation, such as usage, service
or repair of any terminal incorporating Quectel L26-T module. Manufacturers of the terminal should notify
users and operating personnel of the following safety information by incorporating these guidelines into all
manuals supplied with the product. If not so, Quectel assumes no liability for any failure to comply with
these precautions.
Be assure the use of the product conforms to the national safety and
environmental regulations, and is allowed in the country and in the environment
required.
Keep away from explosive and flammable materials. The use of electronic
products in extreme power supply conditions and locations with potentially
explosive atmospheres may cause fire and explosion hazards.
The product has to be powered by a stabilized voltage source, and the wiring
shall conform to security and fire prevention regulations.
Proper ESD handling procedures must be applied throughout the mounting,
handling and operation of any application that incorporates the module to avoid
ESD damages.
L26-T_EVB_User_Guide
6 / 22
GNSS Module Series
L26-T EVB User Guide
2
General Overview
2.1. Top view of L26-T EVB
The following figure illustrates the top view of L26-T EVB.
G
F
E
H
D
A
B
C
Figure 1: Top View of L26-T EVB
Table 1: Interfaces of L26-T EVB
SN.
Designator
Description
A
D102
Indication LEDs
L26-T_EVB_User_Guide
7 / 22
GNSS Module Series
L26-T EVB User Guide
B
J303
Micro-USB connector
C
S201
Power switch
D
S102
Boot button
E
S101
Reset button
F
J103
Antenna connector
G
U102
L26-T module
H
J104
Test points
2.2. L26-T EVB & Kit Accessories
USB Cable
GNSS
Antenna
EVB
USB Flash Drive
Bolts and
Coupling Nuts
Figure 2: L26-T EVB & Kit Accessories
L26-T_EVB_User_Guide
8 / 22
GNSS Module Series
L26-T EVB User Guide
Table 2: List of Accessories
Items
Description
Quantity
USB Cable
USB cable
1
EVB
Evaluation board
1
Antenna
GNSS antenna (active)
1
USB Flash Drive
USB flash drive (including L26-T related documents,
tools, drivers, etc.)
1
Instruction Sheet
A sheet of paper giving instructions for EVB
connection, details of EVB accessories, etc.
1
Others
Bolts and coupling nuts
4 pairs
2.3. EVB and Accessories Assembly
The following figure shows the assembly of L26-T EVB and its accessories.
Figure 3: L26-T EVB and Accessories Assembly
L26-T_EVB_User_Guide
9 / 22
GNSS Module Series
L26-T EVB User Guide
3
Interface Applications
3.1. Micro-USB Interface
Micro-USB connector is used for EVB power supply as well as data transmission.
Micro-USB
connector
Figure 4: Micro-USB Connector
3.2. Antenna Interface
The antenna connector is used to connect an external passive or active GNSS antenna.
Antenna
connector
Figure 5: Antenna Connector
L26-T_EVB_User_Guide
10 / 22
GNSS Module Series
L26-T EVB User Guide
3.3. Switches and Buttons
The following figure illustrates the switches and buttons of the EVB.
S101
S102
S201
Figure 6: Switches and Buttons
Table 3: Switches and Buttons
Part No.
Name
I/O
Description
S101
RESET
DI
The module will be reset through pressing and then
releasing the button.
S102
BOOT
DI
Please refer to Chapter 4.2.2 for details.
S201
POWER
PI
Power switch
L26-T_EVB_User_Guide
11 / 22
GNSS Module Series
L26-T EVB User Guide
3.4. Operation Status Indication LEDs
L1
L2
Figure 7: Operation Status Indication LEDs
Table 4: Operation Status Indication LEDs
Part
Name
I/O
Description
L1
1PPS
DO
Flash: 1PPS signal indicator. The frequency is 1Hz (configurable).
L2
PWR
DO
Power indicator
3.5. Test Points
The following figure illustrates the test points of the EVB.
1
3
5
7
9
2
4
6
8
10
Figure 8: Test Points - J104
L26-T_EVB_User_Guide
12 / 22
GNSS Module Series
L26-T EVB User Guide
Table 5: Pin Description
Pin No.
Signal
I/O
Description
1
WI
/
/
2
UART_RX
DI
Receive data
3
TIMEPULSE
DO
One pulse per second
4
UART_TX
DO
Transmit data
5
PIN5
PI
Reserved
6
ANT1
AI
Antenna detection 1
7
BOOT
DI
Force the module to enter boot download
8
ANT2
AI
Antenna detection 2
9
3.3V
PO
3.3V output
10
GND
/
Ground
L26-T_EVB_User_Guide
13 / 22
GNSS Module Series
L26-T EVB User Guide
4
EVB Operation Procedures
This chapter mainly illustrates the operation procedures of L26-T EVB.
4.1. Communication via Micro-USB Interface
Step 1: Connect the EVB and the PC with a Micro-USB cable through Micro-USB interface, and then
switch POWER to ON state to power on the EVB.
Step 2: Run the USB flash drive on PC to install the USB driver. The USB port numbers can be viewed
in Device Manager of the PC after the USB driver is installed, as shown below.
Figure 9: USB Ports
Step 3: Install and then use the tool QCOM provided by Quectel to realize the communication between
L26-T module and the PC.
The following figure shows the COM Port Setting of QCOM: select the correct “COM Port” (USB
Port shown in the above figure) and set the correct “Baudrate” (the default value: 9600bps). For
more details about the usage of QCOM, please refer to document [4].
Figure 10: COM Port Setting of QCOM
L26-T_EVB_User_Guide
14 / 22
GNSS Module Series
L26-T EVB User Guide
4.2. Firmware Download
L26-T module supports the firmware download in both normal working mode and boot download mode,
respectively using the tools STA808x/9x Firmware Upgrade and TeseoIII XLoader.
4.2.1. Firmware Download in Normal Working Mode
Firmware upgrade in normal working mode should be performed as the following steps:
Step 1: Connect the EVB to a PC through the USB cable.
Step 2: Switch POWER to ON state to power on the EVB.
Step 3: Run the tool STA808x/9x Firmware Upgrade and configure the tool as shown below.
Figure 11: STA808x/9x Firmware Upgrade Tool Configurations
Step 4: Click
button and then reset the module to upgrade the firmware.
NOTE
Please make sure the module is in full on mode before downloading firmware by this method.
L26-T_EVB_User_Guide
15 / 22
GNSS Module Series
L26-T EVB User Guide
4.2.2. Firmware Download in Boot Download Mode
Firmware download in boot download mode should be performed as the following steps:
Step 1: Connect the EVB to a PC through the USB cable.
Step 2: Press and hold the BOOT button, and switch POWER to ON state to power on the EVB. Once
the high voltage level of BOOT pin has been detected during power-up, the module will enter into
boot download mode.
Step 3: Release BOOT button to make BOOT pin of L26-T return to normal floating.
Step 4: Run the tool TeseoIII XLoader and configure the tool as shown below.
Figure 12: TeseoIII XLoader Tool Configurations for Firmware Upgrade
Step 5: Click
L26-T_EVB_User_Guide
button to upgrade the firmware.
16 / 22
GNSS Module Series
L26-T EVB User Guide
5
Usage of Teseo-Suite Pro
After the EVB accessories are assembled, please turn on the module and start the tool Teseo-Suite Pro.
The tool helps users to view the status of GNSS receiver. The following chapter only briefly describes the
use of Teseo-Suite Pro, for more details about the tool, please click “Help” and select “User Manual” in
the tool.
5.1. View the GNSS Receiver Status
5.1.1. COM Port and Baud Rate Setting
After the tool is opened, the following interface will be shown:
Figure 13: Teseo-Suite Pro Tool Interface
L26-T_EVB_User_Guide
17 / 22
GNSS Module Series
L26-T EVB User Guide
UART port can be automatically identified by Teseo-Suite Pro when it is opened. If not, the steps from “a”
to “d” illustrated in the following figure should be performed.
Please click the corresponding buttons. After
button is clicked, the “Rover Configuration”
box will be popped up, then please check the “Add Control Port” box.
a
b
c
d
Figure 14: Manual Configuration the COM Port
L26-T_EVB_User_Guide
18 / 22
GNSS Module Series
L26-T EVB User Guide
5.1.2. Explanations of Views and Windows
The following interface will be shown by clicking
button. The digit shown above each flag is the CN
value. Below are displayed information such as the PRN, the frequency band used by the satellite
(“BAND”), the azimuth (“AZI”) and the elevation of the satellite (“ELE”). The clear flag indicates that the
navigation data of this satellite is in use, while the faded flag indicates not used.
Figure 15: Signal Level
By clicking
button, "Sky View" will be opened, which shows the current azimuth and elevation of
satellites used for the fix.
Figure 16: Sky View
L26-T_EVB_User_Guide
19 / 22
GNSS Module Series
L26-T EVB User Guide
Through clicking
button, "View Positioning" form that shows information about GPS positioning of
devices will be opened.
Figure 17: Module Positioning Form
5.2. Send PSTM Commands
PSTM Commands can be sent by Teseo-Suite Pro. By clicking
be popped up, which is shown in the figure below.
button, the command input box will
L
Figure 18: Command Sending via Teseo-Suite Pro
L26-T_EVB_User_Guide
20 / 22
GNSS Module Series
L26-T EVB User Guide
6
Appendix A Reference
Table 6: Related Documents
SN
Document name
Remark
[1]
Quectel_L26-T&L26-P_Hardware_Design
L26-T&L26-P hardware design
[2]
Quectel_L26-T&L26-P_GNSS_Protocol_Specification
L26-T&L26-P GNSS protocol
specification document
[3]
Quectel_L26-T&L26-P_Reference Design
L26-T&L26-P reference design
[4]
Quectel_QCOM_User_Guide
QCOM User Guide
Table 7: Terms and Abbreviations
Abbreviation
Description
API
Application Programming Interface
CAN
Controller Area Network
CNR
Carrier-to-Noise Ratio
DI
Digital Input
DO
Digital Output
EVB
Evaluation Board
GNSS
Global Navigation Satellite System
IO
Bidirectional
LED
Light Emitting Diode
NVM
Non-volatile Memory
OBD
On Board Diagnostics
PI
Power Input
L26-T_EVB_User_Guide
21 / 22
GNSS Module Series
L26-T EVB User Guide
PPS
Pulse Per Second
PRN
Pseudorandom Noise
SV
Satellite Vehicle
UART
Universal Asynchronous Receiver & Transmitter
UTC
Coordinated Universal Time
L26-T_EVB_User_Guide
22 / 22