LT11020T0050JBK

AMERICAN TECHNICAL CERAMICS HIGH POWER RESISTIVE PRODUCTS ® ATC HIGH POWER RESISTIVE PRODUCTS Table of Contents ATC: Company Overview.........................................................................................................................................1 ATC Attenuators.......................................................................................................................................................3 Leaded Chip Attenuators............................................................................................................................4 Flange Mount Attenuators.........................................................................................................................5 Attenuator Power Handling vs. Mounting Surface Temperature............................................................6 ATC Resistors............................................................................................................................................................8 Surface Mount Chip Resistors.....................................................................................................................9 Chip Resistors.............................................................................................................................................10 Leaded Chip Resistors...............................................................................................................................11 High Power Flange Mount Resistors.................................................................................................. 12-17 ATC Terminations...................................................................................................................................................18 Surface Mount Chip Terminations..................................................................................................... 19-20 Chip Terminations.....................................................................................................................................21 Leaded Chip Terminations........................................................................................................................22 High Power Flange Mount Terminations.......................................................................................... 23-36 ATC Jumpers...........................................................................................................................................................37 ATC Resistive Product Design Kits.........................................................................................................................38 ATC Resistive Product Tape and Reel Specifications............................................................................................39 ATC Resistive Products Quality Assurance and Electrical and Environmental....................................................39 ATC Resistors and Terminations: Mounting and Attachment Recommendations....................................... 40-44 ATC Resistors and Terminations: Engineering Guidelines Design, Measurement and Performance.......... 46-60 ATC Contact Information.......................................................................................................................................61 A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC HIGH POWER RESISTIVE PRODUCTS Corporate Profile ATC designs, develops, manufactures and markets Multilayer Capacitors, Single Layer Capacitors, Resistive Products, Inductors and Custom Thin Film Products for RF, microwave and millimeter-wave applications. Our products are primarily focused on the wireless communications infrastructure, fiber optic, medical electronics, semiconductor manufacturing equipment, defense, aerospace, and satellite communications markets. For over fifty years, ATC’s family of superior component and custom integrated packaging solutions has been represented by THE ENGINEERS’ CHOICETM brand. ATC’s Jacksonville Facility occupies approximately 100,000 sq. ft. ATC’s New York Facility occupies Customer interface is administered by our approximately 90,000 sq. ft. own personnel and independent sales representatives. American Technical Ceramics is headquartered in Huntington Station, New York and has an Advanced Technology Center in Jacksonville, Florida. This is the center of excellence for our traditional product lines and the development and manufacturing facilities for Thin Film and Resistive Products. American Technical Ceramics' Sales and Customer Service Center, serving Europe, Africa and the Middle East, is located in the Czech Republic. ATC has Regional Sales Offices in Surrey, England and Hallbergmoos, Germany. The Company's whollyowned subsidiary offering Sales and Technical Support for Asia is located in Shenzhen, P.R. China. American Technical Ceramics is a wholly-owned subsidiary of AVX Corp. The common stock of AVX is listed on the New York Stock Exchange (symbol “AVX”). RLC Products • Multilayer Ceramic Capacitors • Capacitor Assemblies for Power Applications • Single Layer Ceramic Capacitors • Resistor Products • Inductor Products Process and Packaging • Thin Film Custom Products: metalization and patterned substrates for a broad range of hybrid circuit requirements Markets Served • Wireless Communications Infrastructure • Semiconductor Manufacturing Equipment • Medical Diagnostic Equipment • Sattelite Systems • Public Safety Radio • Avionic Systems • Military and Aerospace • Commerical Broadcast Transmitters • Fiber Optic Communications • Automotive Electronics Facilities • Huntington Station, New York – Sales, Applications Support, Manufacturing and Distribution Center • Jacksonville, Florida – Advanced Technology Center, Manufacturing Facility Download complete pdf data sheets at www.atceramics.com ATC’s website includes a complete listing of technical articles in pdf format, as well as new product updates and design support software. As an added convenience, ATC Multilayer Capacitor Kits and Inductor Design Kits may be purchased online. NOTE: Contact ATC’s Applications Engineers for further technical information at +1-631-622-4700. A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 1 ATC HIGH POWER A M E R I C A N 2 ATC North America sales@atceramics.com RESISTIVE PRODUCTS T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC HIGH POWER RESISTIVE PRODUCTS Attenuators American Technical Ceramics introduces its line of High Power Attenuator Products.  All Products are designed and manufactured at our IS0 9001 Facilities. All products are designed to meet MIL-PRF-55342 and ATC qualification procedure JP625-4102. Electrical Specifications • Attenuation: 1 dB through 30 dB • Frequency Range: DC to 3 GHz • Input Power: up to 150 Watts • Operating Temperature Range: -55˚C through +150˚C Mechanical Specifications • Package: Leaded and Flange Mounted • Substrate Material: Aluminum Nitride • Process: 100% Thin Film Processed • Resistive Material: Tantalum • Terminals: 100% Ag • Cover: Alumina • Mounting Flange: 100% Cu, Ni or Ag Plated • RoHS Compliant Attenuator Power Handling vs. Mounting Surface Temperature 350 Notes: 1. Plot refers to incident continuous power of “P” Watts 2. Mounting surface is assumed an isotherm at TM °C 3. Actual testing done at P = 100 Watts, TM = 100 °C 4. Plot based on 1-dimensional heat transfer formula: T = TM + PR, where T = area-average resistive film temperature, held to 150 °C, max. R = thermal resistance, mounting surface to resistive film ≈ 0.5 °C/W for 30- and 20- dB devices (other values will run cooler and therefore handle more power – consult factory) Power Handling (Watts) 300 250 200 150 100 50 0 0 25 50 75 100 125 150 Mounting Surface Temperature (°C) * Test Condition: With mounting surface temperature = 75 °C, max. (see plot above). Actual test conditions are as follows: Flange attached to a large copper carrier whose surface, directly under the flange center, is held at 100 °C; power applied = 100 Watts. Specification: The attenuation shall change no more that 0.2 dB during and after a 100-hr. Burn-in per MIL-PRF-55342. ** Attenuation vs. frequency as a function of temperature, -55°C to +125°C A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 3 ATC HIGH POWER RESISTIVE PRODUCTS High Power Leaded Chip Attenuators Style LA1 General Specifications • Frequency Range: DC to 3 GHz • Input Power*: 150 Watts • Operating Temp Range: -55 to +150˚C • Attenuation Stability**: 0.0001 dB/dB/°C, Max. • Resistive Elements: Tantalum Nitride • Substrate Material: Aluminum Nitride • Tabs: 99.99% Pure Silver, .004 inches thick, Cover: Alumina • RoHS Compliant • Reliability: MIL-PRF-55342 .040 (1.02 mm) .080 MAX. (2.03 mm) .400 (10.16 mm) Mechanical Tolerance: ±.010 inch unless otherwise specified .250 TYP. (6.35 mm) .375 (9.53 mm) .040 TYP. (1.02 mm) .004 (.101 mm) ATC Part Number Nominal Frequency FR10975N0100JBK Attenuation (dB) Sensitivity (dB, max.) LA13740P01DBFBK LA13740P02DBFBK LA13740P03DBFBK LA13740P06DBFBK LA13740P09DBFBK LA13740P10DBFBK LA13740P17DBFBK LA13740P20DBFBK LA13740P30DBFBK 1 2 3 6 9 10 17 20 30 ± 0.20 ± 0.30 ± 0.30 ± 0.30 ± 0.30 ± 0.20 ± 1.00 ± 1.00 ± 1.05 Maximum Deviation from Nominal (dB) VSWR (max.) +0.45 / -0.15 0.50 / -0.30 0.60 / -0.30 +0.60 / -0.20 +0.60 / -0.20 +0.40 / -0.30 +1.00 / -1.20 +1.00 / -1.20 +1.75 / -1.20 1.55 1.50 1.50 1.30 1.30 1.25 1.30 1.25 1.25 For Attenuator Power Handling vs. Mounting Surface Temperature, see page 6. ATC Leaded Chip Attenuators Part Number Code LA1 3740 P 02DB F BK Case Style Packaging BK - Plastic Carrier Tolerance F ±1% Value Case Size Termination A M E R I C A N 4 ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC HIGH POWER RESISTIVE PRODUCTS High Power Flange Mount Attenuators Style FA1 General Specifications • Frequency Range: DC to 3 GHz • Input Power*: 150 Watts • Operating Temp Range: -55 to +150˚C • Attenuation Stability**: 0.0001 dB/dB/°C, Max. • Mounting Flange: Copper, Pd over Ni; other platings available • Resistive Elements: Tantalum Nitride • Substrate Material: Aluminum Nitride • Tabs: 99.99% Pure Silver, .004 inches thick, Cover: Alumina • RoHS Compliant • Reliability: MIL-PRF-55342 xx denotes attenuation .975 (24.77 mm) .725 MIN. (18.4 mm) .400 (10.16 mm) .225 MAX. (5.76 mm) Mechanical Tolerance: ±.010 inch unless otherwise specified .125 (3.18 mm) .125 (3.18 mm) .188 (4.76 mm) .375 (9.53 mm) .125 THRU (3.18 mm) .170 (4.32 mm) .290 TYP. (7.36 mm) .040 TYP. (1.02 mm) .004 (.101 mm) .305 ± .005 (7.75 mm ±.127 mm) .250 TYP. (6.35 mm) .670 (17.02 mm) ATC Part Number Nominal Attenuation (dB) Frequency Sensitivity (dB, max.) Maximum Deviation from Nominal (dB) VSWR (max.) FA10975P01DBFBK FA10975P02DBFBK FA10975P03DBFBK FA10975P06DBFBK FA10975P09DBFBK FA10975P10DBFBK FA10975P17DBFBK FA10975P20DBFBK FA10975P30DBFBK 1 2 3 6 9 10 17 20 30 ± 0.25 ±0.30 ± 0.30 ± 0.45 ± 0.35 ± 0.20 ± 1.00 ± 1.00 ± 1.05 +0.45 / -0.15 +0.50 / -0.30 +0.60 / -0.30 +0.80 / -0.20 +0.70 / -0.20 +0.40 / -0.30 +1.00 / -1.20 +1.00 / -1.20 +1.75 / -1.20 1.55:1 1.50:1 1.50:1 1.40:1 1.30:1 1.40:1 1.30:1 1.30:1 1.25:1 For Attenuator Power Handling vs. Mounting Surface Temperature, see page 6. ATC Flange Mount Attenuators Part Number Code FA1 0975 P 01DB F BK Case Style Packaging BK - Plastic Carrier Tolerance F ±1% Value Case Size Termination A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 5 ATC HIGH POWER RESISTIVE PRODUCTS Attenuator Power Handling vs. Mounting Surface Temperature 350 Notes: 1. Plot refers to incident continuous power of “P” Watts 2. Mounting surface is assumed an isotherm at TM °C 3. Actual testing done at P = 100 Watts, TM = 100 °C 4. Plot based on 1-dimensional heat transfer formula: T = TM + PR, where T = area-average resistive film temperature, held to 150 °C, max. R = thermal resistance, mounting surface to resistive film ≈ 0.5 °C/W for 30- and 20- dB devices (other values will run cooler and therefore handle more power – consult factory) Power Handling (Watts) 300 250 200 150 100 50 0 0 25 50 75 100 125 150 Mounting Surface Temperature (°C) * Test Condition: With mounting surface temperature = 75 °C, max. (see plot above). Actual test conditions are as follows: Flange attached to a large copper carrier whose surface, directly under the flange center, is held at 100 °C; power applied = 100 Watts. Specification: The attenuation shall change no more that 0.2 dB during and after a 100-hr. Burn-in per MIL-PRF-55342. ** Attenuation vs. frequency as a function of temperature, -55°C to +125°C A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 6 ATC HIGH POWER A M E R I C A N 7 ATC North America sales@atceramics.com RESISTIVE PRODUCTS T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC HIGH POWER RESISTIVE PRODUCTS Resistors American Technical Ceramics introduces its complete line of High Power Resistive Products.  All Products are designed and manufactured at our IS0 9001 Facilities. All products are designed to meet MIL-PRF-55342 and ATC qualification procedure JP625-4102. Electrical Specifications • Resistance: 50 and 100 Ω standard (10 Ω - 200 Ω available) • Resistance Tolerance: ±5% standard (±2% available) • Power: 4 Watts through 250 Watts • Operating Temperature Range: -55˚C - +150˚C • Temperature Coefficient: < 150 ppm/˚C • Low Capacitance Mechanical Specifications • Package: Surface Mount Chips, Chips, Leaded Chips, Flanged • Substrate Material: Aluminum Nitride • Process: Thin Film • Resistive Material: Tantalum • Terminals: Silver • Cover: Alumina • Mounting Flange: 100% Cu, Ni or Ag Plated • Mechanical Tolerance: ±.005 • SMT and Chip products, supplied on Tape and Reel • Non-Magnetic (exception CS and CW Style Surface Mount Resistors) • Lead-Free, RoHS Compliant ATC Flange Mount Resistors Part Number Code FR1 0300 N 0100 J BK Case Style Case Size Termination *G ±2% available - Consult Factory Packaging BK - Plastic Carrier Tolerance* J ±5% Value Power Derating A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 8 ATC HIGH POWER RESISTIVE Surface Mount Chip Resistors Style CS Style CS1 and Style CW1 • Resistive Tolerance: ±2% standard Overcoat Side View • Operating Temp Range: -55 to +150˚C • Temperature Coefficient: