3
Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
with high performance acrylic adhesive
Product Information
Product Description
March, 2008
3M™ Scotchmate™ Reclosable Fasteners offer advanced closure alternatives to
zippers, screws, snaps, hooks and more. They offer greater design flexibility, faster
product assembly, smoother and cleaner exterior surfaces and improved product
performance in many applications. Scotchmate reclosable fasteners consist of nylon
fabric with hooks or loops. They engage to form a quick fastening attachment.
Simply pull the strips apart by hand to disengage.
The woven nylon hook backing has flexible, self-supporting inverted J-hooks
protruding up from the backing. There are approximately 300 hooks per square
inch (46 hooks/square cm). The woven nylon loop backing has thousands of soft,
pliable napped loops protruding above the backing, providing for thousands of
openings and closings (cycles). The hook and loop are preshrunk to ensure
maximum dimensional stability and flatness.
These hook and loop fasteners are coated on the backside with a high temperature
acrylic pressure sensitive adhesive designed to function over a range of temperatures
and humidity. This adhesive is especially suited for attachment to bare metals and a
variety of high surface energy adherends. For attachment to powder coated paints or
other low surface energy materials such as polyethylene or polypropylene, the use of
adhesion promoters may be necessary or you can evaluate our line of Scotchmate
fasteners with rubber based adhesives such as 3M™ Scotchmate™ Reclosable
Fastener SJ3518FR or SJ3532N.
The loop is available with a fabricator splice. This consists of the adhesive side of the
Scotchmate reclosable fastener and the liner being spliced. This provides product
and liner continuity on the roll. This product is ordered as SJ3571FS. When it is
desired to have marked the splices, the loop product can be ordered as SJ3571FSR.
Scotchmate reclosable fastener SJ3571 is also available with a brown 83 pound
polykraft paper liner allowing easier die-cutting. The product number with the
paper liner is SJ3571P.
3M™ Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
Product Construction
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
Products
3M™ Scotchmate™ Reclosable Fastener
SJ3571 (Loop)
SJ3572 (Hook)
SJ3571P (Loop)
Material of Construction
Hook
Loop
Adhesive
Standard Colors(a)
nylon 6 hook, nylon 6,6 ground
all nylon 6,6
Acrylic
Black, White, Beige
Thickness(b) max. unmated
Hook
Loop
Selvedge Edge
In. (mm) ± 1/32" (0.8 mm)
3/32" (2.4 mm)
4/32" (3.2 mm)
3/32" (2.4 mm)
4/32" (3.2 mm) for 4" wide
Weight(b) oz/in2 (g/cm2)
Hook
Loop
Liner
0.013 oz/in2 (0.06 g/cm2)
0.014 oz/in2 (0.06 g/cm2)
Clear polypropylene film
with white embossed
3M logo (4.0 mil)
Brown 83 pound polykraft
liner with a silicone
release coating.
No printing.
a) Other fastener colors are available as special orders. 3M recommends the user to evaluate a color
sample to see if it meets their color requirements. See your 3M authorized distributor or 3M
representative for color selection guide and minimum requirements.
b) Thickness was measured using a 1/2" diameter pressure foot supporting a 34 gram weight. Actual
thickness depends upon the amount of compression load on the pieces. All thickness and weight values
are with the liner removed.
Storage
Store in original packaging between 60° to 80°F (16° to 27°C) and 40 to 60%
relative humidity.
Shelf Life
To obtain best performance, use this product within two years from date of
manufacture.
-2-
3M™ Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
Typical Closure and Note: The following information is not product release requirements, nor product specifications. Rather
this data represent typical performance using standard test methods. This is intended for use as a
System Performance
guide to assist in selection of 3M™ Scotchmate™ Reclosable Fasteners for further evaluation.
Characteristics
Customer specifications should not be based solely on the data presented in this document.
Unless stated, typical system performance characteristics were measured under controlled laboratory
conditions of 72°F (22°C) and 50% relative humidity. The user should evaluate products in the actual
application to ensure suitable performance for the intended use.
System Performance(a)
3M™ Scotchmate™
Reclosable Fastener
SJ3571 Loop engaged
to 3M™ Scotchmate™
Reclosable Fastener
SJ3572 Hook
TENSILE (Rigid to Rigid Substrates)
Dynamic Tensile Engagement Strength
Dynamic Tensile Disengagement(c)
Static Tensile Holding Power
100°F/100% RH
200°F
220°F
250°F
SHEAR (Rigid to Rigid Substrates)
Dynamic Shear (1" x 1" overlap)(c)
Static Shear Holding Power
100°F/100% RH
158°F
200°F
3M™ Scotchmate™
Reclosable Fastener
SJ3571 Loop engaged
to 3M™ Dual Lock™
Reclosable Fastener
SJ3560(b)
lbsF/sq inch (Newton/cm2):
< 1.0 (0.69)
< 1.0 (0.69)
7.5 (5.2)
39.8 (27.4)
Holds 2.2#/in2 (155 grams/cm2) for indicated
time and temperature
3,000 minutes
10,000 minutes
10,000 minutes
10,000 minutes
10,000 minutes
10,000 minutes
1,300 minutes
10,000 minutes
lbsF/sq inch (Newton/cm2):
23 (16)
46 (32)
Holds 2.2#/in2 (155 grams/cm2) for indicated
time and temperature
10,000 minutes
10,000 minutes
10,000 minutes
10,000 minutes
10,000 minutes
10,000 minute
PEEL AND CLEAVAGE(c)
Peel Strength (“T” Peel, Flexible to Flexible)
Peel Strength (90° Peel, Flexible to Rigid)
Pounds/inch width (grams/cm width)
1.3 (223)
3.0 (528)
1.8 (313)
4.6 (821)
ENGAGED THICKNESS(d)
(Nominal without liner)
0.15 (3.8)
0.21 (5.2)
5,000
50
Inches (mm)
(e)
CLOSURE CYCLE LIFE
Note: Long Term Static Load: Conditions such as temperature variations, engagement area, closure pressure and vibrations or
side to side movement after engagement or exposure to prolonged periods of moisture, ultraviolet or other environmental factors can
affect the closure strength and long term static load performance. Fasteners may slip or creep in the direction of the static load forces
when subjected to static loads at temperatures, times or weights greater than indicated. The user is responsible for designing the
amount of fastening area based upon the specific conditions for the application. Four square inches of fastening area per pound of
static load is suggested as a starting point for such evaluations.
a) System performance tests are determined by measuring the performance of the entire mated reclosable fastener system consisting of
two 1/8" thick non-anodized aluminum plates joined together with the indicated fasteners. The “T” peel test only measures the closure
performance per ASTM D5170 and was not adhered to aluminum panels. The 90° peel has one of the mated fasteners attached to a
1/8" thick non-anodized aluminum plate while the mated fastener is not attached to an adherend and is disengaged at a 90° angle.
b) The use of 3M™ Scotchmate™ Loop Reclosable Fasteners engaged to 3M™ Dual Lock™ Reclosable Fasteners provides increased
strength over standard Scotchmate reclosable fasteners, with a limited number of reclosures compared with Scotchmate systems. Due
to the very high strength of Scotchmate reclosable fasteners mated to Dual Lock reclosable fasteners, extra care should be given to
ensure the maximum bond strength is obtained to the adherends being joined. Failure to obtain bond strengths sufficiently high to the
adherend may cause the fastener’s adhesive to release from the adherend.
c) 3M™ Scotchmate™ Reclosable Fasteners SJ3571 and SJ3572 and 3M™ Dual Lock Reclosable Fastener SJ3560 are engaged with firm
pressure and disengaged, peeled or cleaved at the rate of 12 inches (305 mm) per minute.
d) The engaged thickness was measured using a 0.5" diameter pressure foot supporting a 34 gram weight. Engaged thickness per given
fastener area will decrease when compressed or increase with no load or when the engaged fasteners are separated under a tensile
load.
e) Cycle Life is the number of cycles (openings and closings) that the fastener is subjected to while maintaining 50% or greater of the initial
peel value.
-3-
3M™ Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
Additional
Performance
Characteristics
Note: The following information is not product release requirements, nor product specifications.
Rather this data represent typical performance using standard test methods. This is
intended for use as a guide to assist in selection of 3M™ Scotchmate™ Reclosable Fasteners
for further evaluation. Customer specifications should not be based solely on the data
presented in this document.
Solvent Resistance: The nylon components resist occasional attack by most common
solvents and alkaline solutions. Acid solutions may cause deterioration of the
fastener. The adhesive on 3M™ Scotchmate™ Reclosable Fasteners SJ3571 and
SJ3572 is resistant to many common laboratory solvents and transportation fluids
(gasoline, motor oil, etc.) when exposed for short time periods.
Plasticizer Resistance: The adhesive on Scotchmate reclosable fasteners SJ3571
and SJ3572 has good resistance to plasticizers found in many common flexible
vinyls or other materials containing high levels of plasticizing materials. If greater
plasticizer resistance is desired 3M™ Scotchmate™ Reclosable Fasteners SJ3522 or
SJ3523 or many of our 3M™ Dual Lock™ Reclosable Fastener products can be
evaluated.
Flammability Resistance: Scotchmate reclosable fasteners SJ3571 and SJ3572 meet
the requirements of FMVSS-302 when attached to a thin metal panel. If you need
3M™ Scotchmate™ Reclosable Fasteners that meet other standard flammability
tests (such as FAR 25.853, ASTM E-162, ASTM E-662 or BSS-7239), please refer
to our publication 3M™ Scotchmate™ Reclosable Fasteners Flame Resistant
Products Product Selection Guide (70-0707-3992-8).
Resistance to Environmental Exposure: Temperature down to -40°F (-40°C)
increases the typical closure strengths. The adhesive on Scotchmate reclosable
fasteners SJ3571 and SJ3572 has been formulated to withstand typical outdoor
temperature, humidity and ultraviolet exposure conditions. Many of our Dual Lock
reclosable fastener products also provide good to excellent performance in outdoor
conditions.
Water (Humidity) Resistance: Closure strength of nylon hook and loop fasteners
decreases after prolonged exposure to water due mainly to water absorption by the cut
nylon ends for hook products. Closure strength is regained when dried. Improved
water resistance of the closure can be obtained by using 3M™ Scotchmate™
Reclosable Fasteners polyester hook and loop SJ3576/SJ3577, SJ3586FR/SJ3587FR
or our polyolefin based Dual Lock reclosable fasteners. Once bonded the adhesive has
high resistance to moisture under typical use conditions.
Volatile Outgassing: Volatile outgassing, as per ASTM E595, is one important
test in determining the suitability of materials for spacecraft. Scotchmate
reclosable fastener SJ3571 and SJ3572 have not been tested for outgassing.
Products tested at the Goddard Space Flight Center can be found at the following
web site: http://outgassing.nasa.gov/
-4-
3M™ Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
Additional
Performance
Characteristics
(continued)
Sterilization/Autoclaving: 3M™ Scotchmate™ Reclosable Fasteners SJ3571 and
SJ3572 have not been tested for appearance or performance after gas or steam
sterilization, or autoclaving.
Washing and Dry Cleaning: Washing or dry cleaning of these products is not
recommended due to the potential for adhesive softening, that could transfer adhesive
residues to other materials, or reduce long term performance.
Fungus Resistance:
Mil standard 810F, Method 508.5: Three samples from one lot of Scotchmate
reclosable fasteners SJ3571 and SJ3572 were exposed to five fungal organisms
(Aspergillus versicolor – ATCC 11730, A. flavus – ATCC 9643, A. niger – ATCC
9642, Penicillium funiculosum – ATCC 11797, and Chaetomium globosum –
ATCC 6205) and gave an average fungal growth rating after 44 days of 2.3 for
Scotchmate reclosable fastener SJ3571 and 1.7 for Scotchmate reclosable fastener
SJ3572.
ASTM G21-96 “Fungal Challenge Test”: Three samples from one lot of
Scotchmate reclosable fasteners SJ3571 and SJ3572 were exposed to five fungal
organisms (Aspergillus niger – ATCC 9642, Penicillium funiculosum – ATCC
11797, Chaetomium globosum – ATCC 6205, Trichoderma virens ATCC 9645
and Auerobasidium pullulans ATCC 15233). Scotchmate reclosable fastener
SJ3571 had an average fungal growth after 7, 14, 21 and 28 days of 2.0, 2.7, 2.7
and 2.7 respectively, whereas Scotchmate reclosable fastener SJ3572 gave an
average rating of 2.0, 2.3, 2.3 and 2.3 for the same time periods.
Static Discharge: Scotchmate reclosable fasteners SJ3571 and SJ3572 have
not been tested for static charge released during liner removal, closure opening nor
adhesive removal from adherends after attachment of the fastener. If your
application requires use of these fasteners in areas where static discharge is of a
concern, the fasteners should be tested under expected use conditions.
-5-
3M™ Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
3M™ Scotchmate™ Reclosable Fasteners(a),(b)
Product Number and Roll Lengths – Yards (Meters)
Standard Sizes Available(c)
Widths
in. ± 1/16"
(mm) ± 1.6
SJ3571
SJ3572
SJ3571P
SJ3571FSR
SJ3571FS
(Loop)
(Hook)
(Loop)
(Loop)
(Loop)
50
(45.7)
100
(91.4)
50
(45.7)
BK
BK
Selvedge(d)
Extended
Liner(d)
25
50
(22.8) (45.7)
1/2"
(12.7 mm)
One Edge
One Edge
BK
W
B
BK
W
B
5/8"
(15.9 mm)
One Edge
One Edge
BK
W
BK
W
B
3/4"
(19 mm)
One Edge
One Edge
BK
W
B
BK
W
B
1"
(25,4 mm)
One Edge
One Edge
1-1/2"
(38.1 mm)
Two Edges
Two Edges
BK,
W
2"
(50.8 mm)
Two Edges
Two Edges
BK
W
B
3"
(76.2 mm)
One Edge
One Edge
BK
BK
4"
(101.6)
Two Edges
Two Edges
BK
W
BK
W
BK
Fabricated Forms(e)
BK
W
B
100
25
30
(91.4) (22.8) (27.4)
BK,
W
B
BK
BK
W
B
BK
BK
W
B
50
100
(45.7) (91.4)
BK
W
B
BK
W
BK
W
B
BK
W
B
See Below for Standard Pieces
W
Cut Pieces
a) 3M™ Scotchmate™ Reclosable Fasteners SJ3571P is the same as Scotchmate reclosable fasteners SJ3571, but with a paper instead of film
liner. Scotchmate reclosable fastener SJ3571FSR is SJ3571 with a marked product splice making splice identification easier. Scotchmate
reclosable fastener SJ3571FS is identical to SJ3571 except the splice is not marked.
b) Standard colors are white (W), black (BK) and beige (B). Other colors are available as special orders. 3M recommends the user to evaluate a
color sample to determine if it meets their color requirements. See your local 3M authorized distributor or 3M representative for a color
selection guide, minimum order quantities and lead times.
c) 3M™ Scotchmate™ Reclosable Fasteners listed above come standard on a 3" inside diameter fiber core in widths up to 4". The diameter of
the side shield is 17.5 inches (44.5 cm) and the width of the roll with the side shield is the product width plus 1/4". Contact your authorized 3M
distributor or 3M representative for details on supplying widths, colors or special sizes not listed above.
d) Other configurations may be possible as a special order, or via a 3M authorized converter.
e) 3M™ Reclosable Fasteners can be fabricated in many custom shapes and sizes to fit your product design and manufacturing process. One
standard shape and size is listed below. For others not listed please contact your local 3M authorized converter or 3M representative for
additional options, configurations and ordering information.
Product Number
Fabricated Pieces
SJ3572
1-7/8" black hook circle, 1000 per roll.
-6-
3M™ Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
Attachment
Techniques
The following information is intended to assist the designer considering the use of
adhesively coated 3M™ Scotchmate™ Reclosable Fasteners. System product
performance depends upon a number of factors, including the fastener (material,
adhesive and area), application method, adherend surface characteristics (material,
texture and cleanliness), environmental conditions (moisture, ultraviolet and temperature
exposure) plus the time it is expected to support a given load. Because many of these
factors are uniquely within the user’s knowledge and control, it is required that the user
evaluate 3M products to determine whether they are fit for a particular purpose and
suitable for the user’s adherends, method of application and desired end use.
Design Considerations: As a general rule, four square inches of fastener adhesive area
per pound (57.3 square centimeters per kilogram) of static load to be supported is
suggested as a starting point for evaluation. More or less area may be needed depending
on specific conditions or end use applications.
Rounding the corners, slightly recessing the product into the adherend or providing
raised edges around the reclosable fastener can reduce the possibility of edge lifting and
improve the overall appearance of the fastener on the finished product. Mechanically
securing the corners of the fastener with rivets, staples, screws, etc. may also reduce the
possibility of edge lifting, but may reduce the closure performance.
The two most common techniques for attaching these 3M™ Scotchmate™ Reclosable
Fasteners to various surfaces are summarized below.
1) Pressure Sensitive Adhesive attachment: The use of pressure sensitive adhesives
eliminates or reduces the need for sewing, solvent activation, dielectric or ultrasonic
bonding or bulk adhesive bonding. This can result in simplicity, improved safety and
lower installation costs. Pressure sensitive adhesive products can be applied manually or
automatically using a variety of equipment choices. Contact your 3M sales representative
to discuss automated equipment options.
Adherend Surface Preparation: Highly textured adherend surfaces may reduce the
ultimate adhesion levels and care should be given to minimize the surface texture or
roughness. Adhesive backed Scotchmate reclosable fasteners should be applied to
surfaces that are clean, dry and free of oil, grease, dust, mold release agents or surface
contaminants that could reduce the adhesion. It is recommended to remove any surface
contaminants that may reduce adhesion by using a method suited for the type and
quantity of surface contaminants present.
Note: It is important for the customer to follow all manufacturer’s precautions and
directions for use as well as any specific government regulations or customer
and supplier requirements for the method(s) used to remove any
contamination on the surface of the adherend or preparing the surface for
attaching the fastener(s).
In exceptional cases, especially when removing silicone mold release agents or on rough,
porous surfaces, it may be necessary to lightly abrade the surface, use an adhesion
promoter, or surface sealer to optimize the adhesive bond to the adherend. The selection
of abrasion, priming or sealing methods will depend upon the adherends and the
environmental conditions the product will be exposed to during use.
-7-
3M™ Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
Attachment
Techniques
(continued)
Attachment Procedure: To obtain an optimum bond to any surface, both the fasteners and the
target surfaces should have equilibrated for a minimum of 1 hour at temperatures between 68°F
(20°C) to 100°F (38°C) before application. The liner protecting the adhesive is removed and
preferably without touching the adhesive, the fastener is applied to the adherend to obtain initial
contact between the adhesive and adherend. Exposure of the adhesive to ambient conditions
without the protective liner, before applying to the surface, should be minimized as initial
adhesive tack may decrease. Flexible adherends should be lying on a hard, flat surface so as to
permit uniform adhesive contact with the surface. Use of a rubber hand roller, press platen or
similar device is recommended to ensure full adhesive contact with the adherend surface.
Approximately 4.5 pounds of force per square inch, (310 grams per square centimeter) is
recommended to increase adhesive contact, improving bond strength. For all adhesive
applications, it is important to ensure that the edges are rolled down to reduce the chance of
edge lifting.
Dwell Time before Handling or Applying a Load: Parts with properly chosen and applied
pressure sensitive adhesive reclosable fasteners can be handled immediately. As the adhesive
further wets-out the adherend surface, adhesive bond strength increases after application with
time, pressure and/or temperature. Once attached to the adherend, a 1-hour minimum dwell
time is recommended before applying a load or disengaging mated Scotchmate reclosable
fastener pieces. This dwell time is important for achieving a firm adhesive bond before
applying a load or using. The adhesive on 3M™ Scotchmate™ Reclosable Fasteners SJ3571
and SJ3572 family of products achieves approximately 50% of the ultimate bond strength
within 60 minutes, 90% after 1 day and the ultimate bond strength of properly applied
fasteners is obtained within 72 hours at 72°F (22°C) and 50% relative humidity. Primers or
adhesion promoters may reduce the time required to achieve the ultimate bond strength.
2) Mechanical Attachment: Mechanical attachment of Scotchmate reclosable fasteners
SJ3571 and SJ3572 family of products may also be secured using staples, screws, rivets and
similar methods for difficult to adhere to surfaces such as textured plastics and wood. This
may reduce the possibility of edge lifting. The head of the mechanical fastener should be flat
and large enough to resist pull through when the fastener is disengaged. The head of the
fastener should also be recessed as much as possible below the surface of the hook or loop to
prevent interference with (dis)engagement properties.
The use of resin coated chisel divergent staples appear to provide excellent attachment to
thick sections of soft and hardwood surfaces.
Application Ideas
Scotchmate reclosable fasteners SJ3571 and SJ3572 family of products can provide a firm
adhesive bond to a wide variety of surfaces, including, but not limited to those listed below.
Because product performance will depend on actual conditions within any specific
application, it is essential that the user evaluate the 3M product to determine whether it is fit
for a particular material purpose and suitable for the user’s method of application.
Plastics
Glass
Sealed Wood
Acrylic
ABS
CARC Paint Bare and painted Metal
Polycarbonate
Polystyrene
Rigid Vinyl
Scotchmate reclosable fasteners SJ3571 and SJ3572 family of products are not recommended for attaching
to low surface energy materials without proper surface modification.
Scotchmate reclosable fasteners SJ3571 and SJ3572 family of products has shown to be useful for:
Anti-scratch surface
Attaching accessories and equipment
Medical Braces
Vibration and sound dampening control
Attaching Exhibit and Display Graphics
-8-
3M™ Scotchmate™ Reclosable Fasteners
SJ3571 and SJ3572 Family
Nylon Loop and Hook
Certification/
Recognition
MSDS: 3M has not prepared a MSDS for these products which are not subject to the MSDS requirements
of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for
use, these products should not present a health and safety hazard. However, use or processing of the
products in a manner not in accordance with the directions for use may affect their performance and
present potential health and safety hazards.
TSCA: These products are defined as an article under the Toxic Substances Control Act and therefore,
are exempt from inventory listing requirements.
Mil Spec. MIL-F-21840: 3M™ Scotchmate™ Reclosable Fastener SJ3572 meets the physical
requirements of Mil spec. MIL-F-21840, Type II, Class 1. 3M™ Scotchmate™ Reclosable Fastener
SJ3571 meets the physical requirements of MIL-F-21840, Class 1. MIL-F-21840, Type II, Class 5
requirements are met by engaging Scotchmate reclosable fastener SJ3571, or any of our nylon
Scotchmate loop products, to any polyester Scotchmate hook product such as SJ3476, SJ3486FR,
SJ3576 or SJ3586FR.
GM 2743M Type II: Scotchmate reclosable fasteners SJ3571 and SJ3572 meet the requirements of
GM 2743 Type II.
GM 3618M Scotchmate reclosable fasteners SJ3571 and SJ3572 meet the requirements of GM 3618.
FMVSS-302: Scotchmate reclosable fasteners SJ3571 and SJ3572 pass FMVSS-302 when tested
attached to a thin metal panel.
Product Use
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Warranty and
Limited Remedy
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Limitation of Liability
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
ISO 9001: 2000 - ISO/TS 16949:2002
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system
registered to ISO 9001: 2000 and ISO/TS 16949:2002 standards.
3
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com/industrial
Recycled Paper
40% pre-consumer
10% post-consumer
-9-
3M, Dual Lock and Scotchmate are
trademarks of 3M Company.
Printed in U.S.A.
©3M 2008 70-0709-3898-3 (3/08)