Technical Data | July 2021
3M™ Low Static Polyimide Film Tape 5419
Product Description
3M™ Low Static Polyimide Film Tape 5419 is a translucent, polyimide film-backed silicone adhesive tape with unique
and extremely low electrostatic discharge properties.
Features
•
•
•
•
•
Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal
from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can
damage board mounted electronic components. 3M Low Static Polyimide Film tape 5419 overcomes this
problem without any of the typical drawbacks of conventional “anti-static” or “static-free” tapes (e.g. variable
adhesion and opaqueness).
At room temperature the properties of polyimide and polyester film are similar. However, as the temperature
increases or decreases, the properties of the polyimide film are less affected than polyester.
Polyimide film does not soften at elevated temperatures, thus, the film provides an excellent release surface at
elevated temperatures
Gold tab protection during wave solder of printed circuit boards.
RoHS compliant.
Product Construction/Material Description
Note: The following technical information and data should be considered representative or typical only and should not be used for
specification purposes.
Backing
Polyimide
Adhesive
Silicone
Color
Gold
Standard Roll Length
36 yds (33 m)
Typical Physical Properties and Performance Characteristics
Note: The following technical information and data should be considered representative or typical only and should not be used for
specification purposes. Final product specifications and testing methods will be outlined in the products Certificate of Analysis
(COA) that is shipped with the commercialized product.
3M™ Low Static Polyimide Film Tape 5419
Property
Value
Method*
Adhesion to Steel:
Tensile Strength at Break:
20 oz./in. width (22 N/100 mm)
33 lbs./in. width (578 N/100 mm)
D-3330
D-3759
Elongation at Break:
Backing Thickness:
Total Tape Thickness:
Temperature Use Range:
Dielectric Strength:
Insulating Resistance:
Static Charge: (measured at 50% RH,
70°F(21°C ) in an ESD controlled
environment)
Outgassing:
60%
1.0 mil (0.03 mm)
2.7 mil (0.07 mm)
-73° to 260°C (-100° to 500°F)
7000 volts
>1*106 ohms
Removal from roll:
很抱歉,暂时无法提供与“1-5-5419”相匹配的价格&库存,您可以联系我们找货
免费人工找货