10150-3000VC

3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded 101 Series • Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction • Contacts: 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available Date Modified: May 25, 2005 TS-0669-09 Sheet 1 of 2 Physical Insulation Material: Glass Reinforced Polyester (PCT) Flamability: UL 94V-0 Color: Black Contact Material: Copper Alloy (C521) Plating Underplating: 80 µ″ (2.0 µm) Nickel Wiping Area: Gold (see ordering information) Solder Area: Gold (RoHS compliant) or Tin-Lead (see ordering information) Shroud Material: Steel Plating: Nickel Wire Accomodation: 24, 26, 28 & 30 AWG Marking: 3M Logo and Part Number Electrical Current Rating: 1 A Insulation Resistance: > 1 × 108Ω at 500 VDC Withstanding Voltage: 500 Vrms for 1 minute Environmental Temperature Rating: -55°C TO +105°C Solder Process: 360°C max for 10 sec. max * RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Solder Plug Connector - Shielded Contact Quantity 101 Series Dimensions A B C 14 .300 [ 7.62 ] .54 [ 13.8 ] .72 [ 18.2 ] 20 .450 [ 11.43 ] .69 [ 17.6 ] .87 [ 22.0 ] 26 .600 [ 15.24 ] .85 [ 21.5 ] 1.02 [ 25.8 ] 36 .850 [ 21.59 ] 1.09 [ 27.8 ] 1.27 [ 32.2 ] 40 .950 [ 24.13 ] 1.19 [ 30.3 ] 1.37 [ 34.7 ] 50 1.200 [ 30.48 ] 1.44 [ 36.7 ] 1.62 [ 41.1 ] 20, 36 & 40 Position .100 [ 2.54 ] Position Position 1 14, 26 & 50 Position .09 [ 2.3 ] .050 [ 1.27 ] Last Position Last Position .09 [ 2.3 ] .20 [ 5.1 ] .20 [ 5.1 ] Position 3 .11 [ 2.9 ] Position 2 .76 [ 19.3 ] .50 [ 12.7 ] .26 [ 6.6 ] C Position 2 Position 1 Position 3 .36 [ 9.1 ] .30 [ 7.5 ] In c h .050 [ 1.27 ] A Position B [m m ] Last Position T o le ra n c e U n le s s N o te d in c h .0 .0 0 ± .1 ± .0 1 ± .0 0 5 .0 0 0 [ ] D im e n s io n s fo r R e fe re n c e O n ly Ordering Information 101XX-3000-XX Contact Quantity (See Table) C = 30µ" [.76 µm] min gold wiping interface E = 20µ" [.5 µm] min gold wiping interface P = Gold flash solder cup (RoHS compliant) V = Tin-lead solder cup Note: This solder plug connector must be used with only 3M Non-Shielded Shell Kits 103XX-52FO-008 Series and 103XX-52A0-008 Series. 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0669-09 Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. © 3M 2005