10214-1210VE

3M™ Mini D Ribbon (MDR) Connectors .050″ Surface Mount Right Angle Receptacle - Shielded 102 Series • Wiper-on-wiper contact for reliable repetitive plugging • Ultra-low signal skew for high data rate transmission • Interface latch design for connection stability • MDR digital LCD interface as a 20 or 26 contact connector • Contacts: 14, 20, 26, 40 and 50 • RoHS* compliant version (-PE plating suffix) available Date Modified: April 5, 2005 TS-0755-10 Sheet 1 of 3 Physical Insulation Material: Glass Reinforced Polyester (PCT) Flammability: UL 94V-0 Color: Beige Contact Material: Copper Alloy (C521) Plating Underplating: 80 µ″ (2.0 µm) Nickel - QQ-N-290, Class 2 Wiping Area: 30 µ″ (0.76 µm) Min Gold - MIL-G-45204, Type II, Grade C Solder Tails: See ordering information Shroud & Latch Hook Material: Steel Plating: Nickel Screw Lock Material: Copper Alloy (C521) Plating: Tin Marking: 3M Logo & Part Number Electrical Current Rating: 1 A Insulation Resistance: > 5 × 108Ω at 500 VDC Withstanding Voltage: 500 Vrms for 1 Minute Environmental Temperature Rating: -55°C to +105°C Process: Surface mount compatible - max. temp. 240°-250°C for 10 seconds. UL File No.: E68080 3M *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Surface Mount Right Angle Receptacle - Shielded Contact Quantity 14 20 26 40 50 3M Part Number 10214-1210 VE 10220-1210 VE 10226-1210 VE 10240-1210 VE 10250-1210 VE Dimensions A±.008 1.16 [ 29.5 ] 1.32 [ 33.4 ] 1.50 [ 38.2 ] 1.85 [ 47.1 ] 2.06 [ 52.4 ] B±.006 .93 [ 23.64 ] 1.081 [ 27.45 ] 1.231 [ 31.26 ] 1.581 [ 40.15 ] 1.831 [ 46.50 ] C±.006 .47 [ 12.70 ] .650 [ 16.51 ] .800 [ 20.32 ] 1.150 [ 29.21 ] 1.400 [ 35.56 ] D±.006 .33 [ 8.26 ] .475 [ 12.07 ] .625 [ 15.88 ] .975 [ 24.77 ] 1.225 [ 31.12 ] E±.006 .50 [ 12.6 ] .646 [ 16.4 ] .795 [ 20.2 ] 1.150 [ 29.2 ] 1.40 [ 35.5 ] 102 Series A position above last position last position 2X M2.5 Thread D .025 [ 0.635 ] position 2 .010 nom. [ 0.25 ] position 1 position below pos. 1 .368 [ 9.35 ] .047 [ 1.20 ] .394 [ 10.00 ] .187 [ 4.75 ] .203 [ 5.15 ] .19 [ 4.8 ] .138 [ 3.5 ] E B 2X M2.5 Thread (see note in ordering info) Position 1 .248 [ 6.30 ] .189 [ 4.80 ] In c h Position last position C Positioning Boss (2x) [m m ] T o le ra n c e U n le s s N o ted .0 in c h ± .1 .0 0 .0 00 ± .0 1 ± .0 05 [ ] D im e n sio n s for R e fe re n ce O n ly Ordering Information Contact Quantity (See Table) 102XX-1210XE Solder tail plating: V = tin-lead over Ni P = flash gold over Ni (RoHS compliant) Note: Use (M2.5x8 mm) screws to mount to panel with max. thickness of 2.0 mm. TS-0755-10 Sheet 2 of 3 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Surface Mount Right Angle Receptacle - Shielded Contact Quantity 14 20 26 40 50 Dimensions A ± .002 .930 [ 23.64 ] 1.081 [ 27.45 ] 1.230 [ 31.26 ] B ± .002 .500 [ 12.70 ] .650 [ 16.51 ] .800 [ 20.32 ] C ± .002 .325 [ 8.26 ] .475 [ 12.07 ] .625 [ 15.88 ] .975 [ 24.77 ] 1.225 [ 31.12 ] .122 [ 3.1 ] .138 [ 3.5 ] .256 [ 6.5 ] PCB Ref. Edge B A .088 [ 2.223 ] .187 max. [ 4.75 ] center spacing .025 ± .0008 .118 [ 3.0 ] center spacing C .165 [ 4.2 ] .016 ± .0004 .093 ± .0004 ∅.110 ± .004 (2X) Screw Lock (see notes below) Lockstand Solder Pad Outline ∅.079 + .004 (2X) - .000 Positioning Hole Solder Pads for Solder Tail (See below for more detail) 102 Series Recommended Board Layout (viewed from connector side) 1.581 [ 40.15 ] 1.150 [ 29.21 ] 1.831 [ 46.50 ] 1.400 [ 35.56 ] Solder Tail Layout Detail (#'s Correspond to Connector Contact # Shown on Previous Page) 14 Pos. Last Pos. 14 7 6 5 4 3 2 1 Connector Position (Top Row) Position (Bottom Row) 4 3 2 1 Connector Position (Top Row) Position (Bottom Row) 13 12 11 10 9 8 PCB Ref. Edge 10 9 8 7 6 5 20 Pos. Last Pos. 20 19 18 17 16 15 14 13 12 11 PCB Ref. Edge 26 Pos. Last Pos. 13 26 25 12 11 10 24 9 8 7 6 5 4 3 2 1 Connector Position (Top Row) Position (Bottom Row) 23 22 21 20 19 18 17 16 15 14 PCB Ref. Edge 40 Pos. Last Pos. 20 19 18 17 16 15 14 13 12 40 39 38 11 10 9 8 7 6 5 4 3 2 1 Connector Position Position (Bottom Row) 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 PCB Ref. Edge 50 Pos. Last Pos. Contact Quantity 14 20 26 40 50 **Notes: 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Connector Position Position (Bottom Row) 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 PCB Ref. Edge D 1.10 [ 19.9 ] .94 [ 23.8 ] 1.09 [ 27.6 ] 1.44 [ 36.5 ] 1.69 [ 42.8 ] E .931 [ 23.64 ] 1.081 [ 27.45 ] 1.231 [ 31.26 ] 1.581 [ 40.15 ] 1.830 [ 46.50 ] R .060 [ 1.50 ] D ± .004 E ± .004 Recommended Panel Cut-out Note: Panel thickness .079 [ 2.00 ] Max. .319 ± .004 [ 8.1 ] 1. Plated through holes for .062″ board thickness. 2. Use mounting screws ( M2.5 ) to fasten to board. TS-0755-10 Sheet 3 of 3 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/esd Minimum 10% Post-consumer Fiber Printed in USA. © 3M 2005