3M™ Mini D Ribbon (MDR) Connectors
.050" Boardmount Through-Hole R. A. Condo Receptacle – Shielded
102 Series
• Wiper-on-wiper contact for reliable repetitive
plugging
• Rugged die cast metal case construction
• Screw lockdown for reliable PCB retention
• Interface latch design for connection stability
• Stacked receptacles save board space
• Contacts: 40 (2 × 20), 100 (2 × 50) and 136 (2 × 68)
• Regulatory Information:
Visit 3M.com/regs or
contact your 3M representative to find the RoHS
compliance status of the 3M part you are
interested in.
Date Modified: October 24, 2019
TS-0671-D
Sheet 1 of 3
Physical
Insulation Material: Glass Reinforced Polyester (PBT)
Flammability: UL 94V-0
Color: Black
Contact Material: Copper Alloy
Plating
Underplating: 80 µ" [2.0 µm] Nickel
Wiping Area: 20 µ" [0.50 µm] Min. Gold
Solder Tail Plating:
Body Material:
Plating:
Shroud & Latch Hook
Material:
Plating:
Other Materials:
Marking:
Gold flash over Nickel
Zinc Alloy
Nickel
Steel
Nickel
Zinc Die Cast (Ground Lock), Stainless Steel (Joint Plate)
3M Logo and Part Number
Electrical
Current Rating: 1 A
Insulation Resistance: >5 × 108Ω at 500 VDC
Withstanding Voltage: 500 VRMS for 1 Minute
Environmental
Temperature Rating: -20°C to +85°C
Process Rating: Solder Dip Test – 260°C for 10 secs., two times after 100°C max. preheat, 60 sec.
max. duration.
UL File No.: E68080
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3M.com/interconnect
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050" Boardmount Through-Hole R. A. Condo Receptacle – Shielded
102 Series
Dimensions
Contact
Quantity
A
B
C
D
E
F
G
20
0.450 [ 11.43 ]
1.08 [ 27.5 ]
1.41 [ 35.8 ]
0.65 [ 16.4 ]
0.92 [ 23.4 ]
1.74 [ 44.2 ]
1.276 [ 32.4 ]
50
1.200 [ 30.48 ]
1.831 [ 46.5 ]
2.17 [ 55.0 ]
1.40 [ 35.5 ]
1.67 [ 42.4 ]
2.47 [ 62.7 ]
2.03 [ 51.5 ]
68
1.650 [ 41.91 ]
2.281 [ 57.93 ]
2.61 [ 66.4 ]
1.85 [ 46.9 ]
2.12 [ 53.8 ]
2.92 [ 74.1 ]
2.48 [ 62.9 ]
Upper
Upper Position 2
Lower
Lower Position 2
.13
[ 3.3 ]
Position 1
.0157 Sq
[ 0.399 ]
3X .07501
[ 1.905 ]
.36
[ 9.1 ]
Lower O Position
Upper Last Position
Lower Last Position
.11
[ 2.9 ]
.45
[ 11.5 ]
Position 1
Upper O Position
.1250
[ 3.175 ]
2X M2.5
.31
[ 7.8 ]
.66
[ 16.7 ]
3x .0750
[ 1.905 ]
1.00
[ 25.4 ]
.188
[4.78 ]
.19
[ 4.8 ]
.20
[ 5.2 ]
D
E
Upper
Upper Position 2
.15
[ 3.9 ]
Position 1
Upper O Position
Upper Last Position
Lower
Position 1
2x M2.5
.11
[ 2.8 ]
.600
[ 15.24 ]
.49
.36
[ 12.4 ] [ 9.1 ] .25
[ 6.3 ]
(.01)
[ (0.3) ]
.19
[ 4.8 ]
.050
[ 1.27 ]
Lower Last
Position
.97
[24.6 ]
15º
A
B
Lower O Position
inch
[mm]
Tolerance Unless Noted
G
C
F
inch
.0
.00
0.00
±.1
±.01
±.005
[ ] Dimensions for
Reference Only
C
Ordering Information
102XX - M218PE
Contact Quantity:
20 - 2 × 20 = 40 Contacts
50 - 2 × 50 = 100 Contacts
68 - 2 × 68 = 136 Contacts
TS-0671-D
Sheet 2 of 3
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3M.com/interconnect
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050" Boardmount Through-Hole R. A. Condo Receptacle – Shielded
Lower Connector O
Position
Contact
Quantity
Dimensions
50 Position
Lower Connector
Position 2
A
B
C
D
1.0814
[ 27.45 ]
0.450
[ 11.43 ]
0.94
[ 23.8 ]
1.276
[ 32.4 ]
50
1.831
[ 46.50 ]
1.831
[ 46.50 ]
1.685
[ 42.80 ]
2.026
[ 51.46 ]
68
2.281
[ 57.93 ]
1.650
[ 41.91 ]
2.134
[ 54.20 ]
2.476
[ 62.89 ]
20
102 Series
2X 0.22
[ 5.5 ]
2X 0.20
[ 5.0 ]
Edge of PC Board
.19 Max.
[4.8]
Lower Connector
Last Position
.050 Typ
[ 1.27 ]
0.04
[ 1.1 ]
.35
[ 9.0 ]
.125
[ 3.18 ]
Recommended Board Layouts
Viewed from Connector Sides
2X ø .110 ± .003
[ 2.80 ]
(See Note*)
Lower Connector
Position 1
20 and 68 Position
Lower Connector
Position 2
Lower Connector O
Position
2X 0.22
[ 5.5 ]
3X .075
[ 1.90 ]
Upper Connector O
Position
Upper Connector
Position
2X 0.20
[ 5.0 ]
.19 Max.
[ 4.8 ]
Edge of PC Board
3X .075
[ 1.90 ]
Upper Connector
Position 2
Upper Connector
Last Position
B
ø .028 ± .003
[0.71]
A ± 0.004 [ .1 ]
Lower Connector
Last Position
.050 Typ
[ 1.27 ]
.04
[ 1.1 ]
.125
[ 3.18 ]
.35
[ 9.0 ]
2X ø .110 ± .003
[ 2.80 ]
(See Note*)
3X .075
[ 1.90 ]
Lower Connector
Position 1
Upper Connector
Position 2
Upper Connector O
Position
B
Upper Connector
Position 1
A ± .004 [.1 ]
inch
[mm]
Tolerance Unless Noted
3X .075
[ 1.90 ]
Upper Connector
Last Position
ø .028 ± .003
[ 0.71 ]
inch
.0
.00
0.00
±.1
±.01
±.005
[ ] Dimensions for
Reference Only
.34 ± .004 [ .1 ]
[ 8.6 ]
Recommended Panel Cut-Out
Panel thickness 0.079 [ 2.0 ] max.
2X ø .12 ± .003
[ 3.0 ]
Note: Plated-through mounting holes for .062 [ 1.57 ] board thickness.
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3M.com/interconnect
.600 ± .004 [ .1 ]
[ 15.24 ]
C ± .004 [ .1 ]
D ± .004 [ .1 ]
TS-0671-D
Sheet 3 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory: For regulatory information about this product, visit 3M.com/regs
or contact your 3M representative.
Technical Information: The technical information, recommendations and other
statements contained in this document are based upon tests or experience that
3M believes are reliable, but the accuracy or completeness of such information
is not guaranteed.
Product Use: Many factors beyond 3M's control and uniquely within user's control
can affect the use and performance of a 3M product in a particular application.
Given the variety of factors that can affect the use and performance of a
3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user's
method of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is
specifically stated on the applicable 3M product packaging or product literature,
3M warrants that each 3M product meets the applicable 3M product specification at
the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR
TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive
remedy is, at 3M's option, replacement of the 3M product or refund of the purchase
price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for
any loss or damage arising from the 3M product, whether direct, indirect, special,
incidental or consequential, regardless of the legal theory asserted, including
warranty, contract, negligence or strict liability.
3M Company
Electronics Materials Solutions Division
13011 McCallen Pass, Bldg. C
Austin, TX 78753-5380
1-800-225-5373
www.3M.com/interconnect
Electronics Materials Solutions Division
Please recycle. Printed in USA. ©
Interconnect Solutions
3M 2020. All rights reserved.
http://www.3M.com/interconnect
RIA-2217B-E
3M is a trademark of 3M Company.
很抱歉,暂时无法提供与“10250-M218PE”相匹配的价格&库存,您可以联系我们找货
免费人工找货