10250-M218VE

3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series • Wiper-on-wiper contact for reliable repetitive plugging • Rugged die cast metal case construction • Screw lockdown for reliable PCB retention • Interface latch design for connection stability • Stacked receptacles save board space • Contacts: 40 (2 x 20), 100 (2 x 50) and 136 (2 x 68) • See Regulatory Information Appendix (RIA) for chemical compliance information. Date Modified: March 5, 2007 TS-0671-07 Sheet 1 of 3 Physical Insulation Material: Flammability: Color: Contact Material: Glass Reinforced Polyester (PBT) UL 94V-0 Black Copper Alloy Plating Underplating: 80 μ″ [ 2.0 μm ] Nickel Wiping Area: 20 μ″ [ 0.50 μm ] Min. Gold Solder tails: See Ordering Information Body Material: Zinc Alloy Plating: Nickel Shroud & Latch Hook Material: Steel Plating: Nickel Other Materials: Zinc Die Cast (Ground Lock), Stainless Steel (Joint Plate) Marking: 3M Logo and Part Number Electrical Current Rating: 1 A Insulation Resistance: > 5 × 108Ω at 500 VDC Withstanding Voltage: 500 VRMS for 1 Minute Environmental Temperature Rating: -20°C to +85°C Process Rating: Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat, 60 sec.max. duration. UL File No.: E68080 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series Dimensions Contact Quantity A B C D E F G 1.276 [ 32.4 ] 20 0.450[ 11.43 ] 1.08 [ 27.5 ] 1.41 [ 35.8 ] 0.65 [ 16.4 ] 0.92 [ 23.4 ] 1.74 [ 44.2 ] 50 1.200 [ 30.48 ] 1.831 [ 46.5 ] 2.17 [ 55.0 ] 1.40 [ 35.5 ] 1.67 [ 42.4 ] 2.47 [ 62.7 ] 2.03 [ 51.5 ] 68 1.650 [ 41.91 ] 2.281 [ 57.93 ] 2.61 [ 66.4 ] 1.85 [ 46.9 ] 2.12 [ 53.8 ] 2.92 [ 74.1 ] 2.48 [ 62.9 ] Upper Position 1 .13 [ 3.3 ] Upper O Position Upper Position 2 Lower Lower Position 2 Position 1 Upper Last Position Lower Last Position .11 [ 2.9 ] .45 [ 11.5 ] .0157 Sq [ 0.399 ] 3X .07501 [ 1.905 ] .36 [ 9.1 ] Lower O Position .1250 [ 3.175 ] 2X M2.5 .31 [ 7.8 ] .66 [ 16.7 ] 3x .0750 [ 1.905 ] 1.00 [ 25.4 ] .188 [4.78 ] .19 [ 4.8 ] .20 [ 5.2 ] D .15 [ 3.9 ] E Upper Position 1 Upper Position 2 Upper O Position Upper Last Position Lower Position 1 2x M2.5 .11 [ 2.8 ] .600 [ 15.24 ] .97 [24.6 ] .49 .36 [ 12.4 ] [ 9.1 ] .25 [ 6.3 ] (.01) [ (0.3) ] Lower Last Position .19 [ 4.8 ] .050 [ 1.27 ] 15° Lower O Position A B G F In ch [m m ] T o leranc e U nless N o te d C inc h .0 .00 ± .1 ± .01 ± .005 .000 [ ] D im e n sion s fo r R e fe re nce O n ly Ordering Information 102XX-M218XE Contact Quantity: 20 - 2 X 20 = 40 Contacts 50 - 2 X 50 = 100 Contacts 68 - 2 X 68 = 136 Contacts Solder Tail Plating: V = Tin-Lead over nickel (RIA E3 & C2 apply) P = Gold flash over nickel (RIA E1 & C1 apply) TS-0671-07 Sheet 2 of 3 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole R. A. Condo Receptacle - Shielded Lower Connector O Position C on tact Q u an ti ty 20 50 68 Di m e n s i on s C A B 1.0814 0.450 0.94 [ 27.45 ] [ 11.43 ] [ 23.8 ] 1.831 [ 46.50 ] [ 2.281 [ 57.93 ] [ 1.200 30.48 ] [ 1.650 41.91 ] [ 1.69 42.8 ] 2.13 54.2 ] 102 Series 50 Position Lower Connector Position 2 D 1.276 [ 32.4 ] 2X 0.22 [ 5.5 ] 2.026 [ 51.45 ] 2.476 .19 Max. [ 62.88 ] [ 4.8 ] 2X 0.20 [ 5.0 ] Lower Connector Last Position Edge of PC Board .050 Typ [ 1.27 ] 0.04 [ 1.1 ] .35 [ 9.0 ] .125 [ 3.18 ] Recommended Board Layouts Viewed from Connector Sides 2X ∅.110 ± .003 [ 2.80 ] (See Note*) Lower Connector Position 1 20 and 68 Position Lower Connector Position 2 Lower Connector O Position 2X 0.22 [ 5.5 ] .19 Max. [ 4.8 ] 3X .075 [ 1.90 ] Upper Connector O Position Upper Connector Position 2X 0.20 [ 5.0 ] Edge of PC Board 3X .075 [ 1.90 ] Upper Connector Position 2 Upper Connector Last Position B A ± 0.004 [ .1 ] ∅.028 ± .003 [ 0.71 ] Lower Connector Last Position .050 Typ [ 1.27 ] .04 [ 1.1 ] .125 [ 3.18 ] .35 [ 9.0 ] 2X ∅.110 ± .003 [ 2.80 ] (See Note*) Inch 3X .075 [ 1.90 ] [mm] Tolerance Unless Noted Lower Connector Position 1 Upper Connector Position 2 Upper Connector O Position Upper Connector Position 1 B A ± .004 [.1 ] 3X .075 [ 1.90 ] Inch Upper Connector Last Position ∅.028 ± .003 [ 0.71 ] .0 .00 ±.1 ±.01 ±.005 .000 [ ] Dimensions for Reference Only .34 ± .004 [ .1 ] [ 8.6 ] Recommended Panel Cut-Out Panel thickness 0.079 [ 2.0 ] max. 2X ∅.12 ± .003 [ 3.0 ] .600 ± .004 [ .1 ] [ 15.24 ] C ± .004 [ .1 ] D ± .004 [ .1 ] Note: Plated-through mounting holes for .062 [ 1.57 ] board thickness. 3 Interconnect Solutions http://www.3M.com/interconnects/ TS-0671-07 Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-B CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS 20 Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-B © 3M 2007