14526-EZ5B-200-02C

3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Digital Data Transmission System - 26 to 26 Position 14526-EZ5B-XXX-02C • Eight shielded differential pairs • Each differential twin-ax pair has a foil shield and drain wire • Entire cable bundle is shielded with foil and braid for additional signal protection • Rugged MDR Ribbon type contact • Quick release latches • RoHS* compliant Date Modified: October 19, 2005 TS-0866-08 Sheet 1 of 3 Physical Connector Contact Plating Wiping Area: 30 µ″ [ 0.76 µm ] Min. Gold Shell Color: Parchment/Beige Material: Acrylonitrile Butadiene Styrene (ABS) Cable Color: Parchment/Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1 A Insulation Resistance: > 1 × 108Ω at 100 VDC Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 ± 10Ω Conductor Size: 30 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Environmental Temperature Rating: -20°C to +75°C "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E86982 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly 26 Position High Density Mini D Ribbon (MDR) Male Plug 26 Position High Density Mini D Ribbon (MDR) Male Plug .050″ High Speed Digital Data Transmission System - 26 to 26 Position14526-EZ5B-XXX-02C Cable (See Wiring Diagram For Cable Construction) 2X Squeeze Release Latches 42.0 1.65 LENGTH 2X Squeeze Release Latches 42.0 1.65 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 MDR 26 Position Plug Both Ends mm [Inch] Tolerance Unless Noted 0.0 mm ± .1 0.00 ± .10 [ ] Dimensions for Reference only Ordering Information 14526-EZ5B-XXX-02C Length: 050 = .5 meters 100 = 1 meter 200 = 2 meters 300 = 3 meters 500 = 5 meters TS-0866-08 Sheet 2 of 3 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly Transmitter, TX 26 Position MDR SMT Receptacle ∇ 1 ATx Out 0- .050″ High Speed Digital Data Transmission System - 26 to 26 Position14526-EZ5B-XXX-02C MDR 26 Pin, Pinout F26-0 Cable Receiver , RX 26 Position MDR SMT Receptacle ARx In 0ARx In 0+ 26 13 14 ATx Out 0+ 2 ATx Out 0 gnd ARx In 0 gnd 25 ARx In 1ARx In 1+ 12 24 15 ATx Out 13 ATx Out 1+ 16 ATx Out 1 gnd 4 ATx Out 2- ARx In gnd 1 11 ARx In 2ARx In 2+ 23 10 17 ATx Out 2+ 5 ATx Out 2 gnd ARx In 2 gnd 22 ARx In Clk9 18 ATx Out Clk6 ATx Out Clk+ ARx In Clk+ 21 ARx In Clk gnd 8 CTL 1 20 CTL 2 7 19 ATx Out Clk gnd 7 CTL 1 20 CTL 2 8 BTx Out 0 gnd BRx In 0 gnd 19 BRx In 0- 6 BRx In 0+ 18 BRx In 1 gnd BRx In 1BRx In 1+ 5 17 4 21 BTx Out 09 BTx Out 0+ 22 BTx Out 1 gnd 10 BTx Out 123 BTx Out 1+ 11 BTx Out 2 gnd 24 BTx Out 212 BTx Out 2+ 25 BTx Out Clk gnd 13 BTx Out Clk26 BTx Out Clk+ BRx In 2 gnd 16 BRx In 23 BRx In 2+ 15 BRx In Clk gnd 2 BRx In Clk- 14 BRx In Clk+ 1 ∇ Symbols Key: 100 Ohm balanced individually shielded twisted pair w/drain 30 AWG insulated conductor TS-0866-08 Sheet 3 of 3 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368 www.3M.com/electronics 3 Minimum 10% Post-Consumer Fiber Printed in USA. © 3M 2005