14526-EZ8B-A00-07C

3M™ Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C • Solution for Digital Displays, Datacom and Telecom applications • Supports LVDS FPD Link™, FlatLink™, ChannelLink™, PanelLink™/TMDS™ electrical interfaces • Each differential twin-ax pair has a foil shield and drain • Entire cable bundle is shielded with foil and braid for additional signal protection • Rugged MDR ribbon type contact • Quick release latches • RoHS* compliant Date Modified: May 15, 2006 TS-0757-17 Sheet 1 of 4 Physical Connector Contact Plating Wiping Area: 30µ" [ 0.76µm ] Min. Gold Shell Color: Beige Shell Material: Acrylonitrile Butadiene Styrene (ABS) Cable Color: Beige Cable Jacket Material: Polyvinyl Chloride (PVC) CableFlammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1A Insulation Resistance: > 1 × 108Ω at @100 Vdc Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 ± 10Ω Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Environmental Temperature Rating: -20°C to +75°C *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E86982 3M Interconnect Solutions http://www.3M.com/interconnects/ FPD Link is a registered trademark of National Semiconductor Inc. PanelLink and TMDS are trademarks of Silicon Image, Inc. FlatLink is a trademark of Texas Instruments, Inc. ChannelLink is a trademark of Computer Network Technology Corp. 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Data Transmission System - 26 to 26 Pos. 26 Position High Density Mini D Ribbon (MDR) Male Plug 14526-EZ8B-XXX-07C 26 Position High Density Mini D Ribbon (MDR) Male Plug Cable (See wiring diagram for cable construction) 2X Squeeze Release Latches 2X Squeeze Release Latches 41.9 1.7 LENGTH (See ordering information) 41.9 1.7 33.5 1.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 11.5 0.5 MDR 26 Position Plug ( Both Ends ) mm [Inch] Tolerance Unless Noted mm 0.0 0.00 ± .1 ± .10 Assembly Length Tolerance Cable Length: 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length [ ] Dimensions for Reference only Ordering Information 14526-EZ8B-XXX-07C Length 060 = 0.61 meter (2 ft.) 100 = 1 meters 200 = 2 meters 300 = 3 meters 500 = 5 meters A00 = 10 meters Notes: 1. USB/DDC Gnd grounding pins for USB and DDC are not commoned in the cable assembly. The end user must specify proper grounding at the board level. 2. Contact 3M for polarization key system. 3M Interconnect Solutions http://www.3M.com/interconnects/ Length 050 = 0.5 meter 150 = 1.5 meters 250 = 2.5 meters 350 = 3.5 meters 400 = 4 meters 450 = 4.5 meters 600 = 6 meters 700 = 7 meters 800 = 8 meters 900 = 9 meters TS-0757-17 Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C MDR 26 Pin, PanelLink™/TMDS™ Pinout P26-7 (Rev 7.0) Transmitter, Tx 3M MDR SMT Receptacle 1 USB/DDC Gnd 14 Tx2+ 2 Tx2 Shield 15 Tx23 Sense 16 USB/DDC Gnd 4 Tx1+ 17 Tx1 Shield 5 Tx1- 23 Rx1+ 10 Rx1 Shield 22 Rx1- 8 Reserved 7 Reserved 20 Reserved 10 Tx0 Shield 23 Tx0- 7 USB+ 19 USB Shield 6 USB18 DDC/SCL 5 Rx0+ 17 Rx0 Shield 4 Rx0- 11 DDC +5VDC 16 DDC +5VDC 24 USB +5VDC 3 USB +5VDC 12 TxC+ 25 TxC Shield Interconnect Solutions http://www.3M.com/interconnects/ 11 USB/DDC Gnd 19 Reserved 22 Tx0+ 3M 24 Sense 21 Reserved 9 DDC/SCL 28 AWG insulated conductor 12 Rx2- 6 Reserved 21 USB- • 25 Rx2 Shield 9 DDC/SDA 8 USB Shield 100 Ohm balanced individually shielded twisted pair w/drain 26 USB/DDC Gnd 13 Rx2+ 18 DDC/SDA 20 USB+ Symbols Key: Cable Receiver, Rx 3M MDR SMT Receptacle 13 TxC26 USB/DDC Gnd 15 RxC+ 2 RxC Shield 14 RxC1 USB/DDC Gnd TS-0757-17 Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C MDR 26 Pin, FPD Link Pinout DISM 1.0 Transmitter, Tx 3M MDR SMT Receptacle 1 Gnd (DDC) 14 TxOutO2 TxOut0Gnd 15 TxOut0+ 3 Sense 7 TxOut2+ 20 USB+ 8 USB Shield 21 USB1- 22 RxIN1+ 9 DDC/SDA 21 RxIN28 RxIN2Gnd 20 RxIN2+ 7 USB+ 19 USB Shield 6 USB18 DDC/SCL 22 TxClkOut- 5 RxCLKIN- 23 TxClkOut+ 11 USB +5VDC 24 DDC +5VDC 12 TxOut325 TxOut3Gnd Interconnect Solutions http://www.3M.com/interconnects/ 24 Sense 9 DDC/SCL 10 TxClkOutGnd 3M 12 RXINO+ 10 RxIN1Gnd 19 TxOut2Gnd 28 AWG insulated conductor 25 RxIN0Gnd 17 TxOut1Gnd 6 TxOut2- • 13 RxIN0- 11 Gnd (USB/DDC) 23 RxIN1- 18 DDC/SDA 100 Ohm balanced individually shielded twisted pair w/drain 26 Gnd (DDC) 16 Gnd (USB/ DDC) 4 TxOut1- 5 TxOut1+ Symbols Key: Cable Receiver, Rx 3M MDR SMT Receptacle 13 TxOut3+ 26 DDC Gnd 17 RxCLKinGnd 4 RxCLKIN+ 16 USB +5VDC 3 DDC +5VDC 15 RxIN32 RxIN3Gnd 14 RxIN3+ 1 DDC Gnd TS-0757-17 Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. © 3M 2006