3M™ Mini D Ribbon (MDR) Cable Assembly
.050” High Speed Digital Data Transmission System - 26 Position
14X26-SZLB-XXX-0LC
• Supports Industrial CameraLink™ in Automated
Imaging Association for camera to frame grabber
communications
• 11 shielded twin-ax pairs and four drain wires
• Entire cable bundle is shielded with foil and braid for
additional signal protection
• Rugged MDR ribbon type contact
• Rugged thumbscrew retention
• EMI shielded junction shell in either plastic or
overmolded construction
• See the Regulatory Information Appendix (RIA)
in the “RoHS compliance” section of
www.3Mconnector.com for compliance information
(RIA E1 & C1 apply)
Date Modified: May 18, 2011
TS-1001-C
Sheet 1 of 4
Physical
Connector Contact Plating
Wiping Area: 30 µ” [ 0.76 µm ] Min. Gold
Shell Color: Beige
Shell Material: Overmold Option: Polyvinyl Chloride (PVC);
Shell Kit Option: Polyester Elastomer
Cable Color: Beige
Cable Jacket Material: Polyvinyl Chloride (PVC)
Cable Flammability: AWM VW-1
Electrical
Voltage Rating: 30 V
Current Rating: 1 A
Insulation Resistance: > 1 × 108Ω at @100 VDC
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance:
Conductor Size:
Propogation Velocity:
Skew (within pair):
Skew (channel skew per chipset):
100 ± 10Ω
28 AWG Stranded
1.25 ns/ft [4.1 ns/m ]
50 ps/meter maximum
50 ps/meter maximum
Environmental
Temperature Rating: -20°C to +75°C
UL File No.: E86982
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
CameraLink is a trademark of the Automated Imaging Association.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050” High Speed Digital Data Transmission System - 26 Position
14X26-SZLB-XXX-0LC
Discrete #4 - 40 Thumbscrew Shell Kit
26 Position High Density
Mini D Ribbon (MDR)
Male Plug
26 Position High Density
Mini D Ribbon (MDR)
Male Plug
Cable
(See pinout for cable construction)
B
Version
2X
Thumbscrews
2X
Thumbscrews
32.5
[1.28]
32.5
[1.28]
LENGTH
(See ordering information)
Overmold #4 - 40 Thumbscrew Shell
26 Position High Density
Mini D Ribbon (MDR)
Male Plug
26 Position
High Density
Mini D Ribbon
(MDR) Male Plug
Cable
(See pinout for cable construction)
T
Version
2X
Thumbscrew
2X
Thumbscrew
45.7
[1.8]
mm
[Inch]
Tolerance Unless Noted
mm
0.0
0.00
±.1
±.01
[ ] Dimensions for
Reference only
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
45.7
[1.8]
LENGTH
(See ordering information)
Assembly Length Tolerance
Cable Length
Tolerance
0.5 to 1.5 meters
-0 + .05 meters
2 to 10 meters
-0 +3% of length
TS-1001-C
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050” High Speed Digital Data Transmission System - 26 Position
14X26-SZLB-XXX-0LC
mm
[Inch]
Tolerance Unless Noted
mm
0.0
0.00
±.1
±.01
[ ] Dimensions for
Reference only
B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
C
Generic End Detail
MDR 26 Position Plug
(Both Ends)
Dimensions
Shell Option
(see ordering information)
B
C
T = Overmold #4-40
Thumbscrew Shell
40.2
[ 1.58 ]
14.0
[ .55 ]
B = Discrete #4-40
Thumbscrew Shell Kit
39.4
[ 1.55 ]
12.8
[ .51 ]
Ordering Information
14X26-SZLB-XXX-0LC
Length:
Shell Retention Options:
B = Discrete #4-40 Thumbscrew shell kit
T = Overmold #4-40 Thumbscrew shell
050 = 0.5 meters
450 = 4.5 meters
100 = 1 meters
500 = 5 meters
150 = 1.5 meters
600 = 6 meters
200 = 2 meters
700 = 7 meters
250 = 2.5 meters
800 = 8 meters
300 = 3 meters
900 = 9 meters
350 = 3.5 meters
A00 = 10 meters
400 = 4 meters
TS-1001-C
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050” High Speed Digital Data Transmission System - 26 Position
14X26-SZLB-XXX-0LC
Cable Assembly and Camera Link Pinouts
Camera
Connector
Medium and Full Configurations
Base Configuration
Two Channel Link Chips
One Channel Link Chip + Camera Control +
Serial Communication
Frame Grabber
Connector
Channel Link
Cable Name
Signal
(Reference
only)
Camera
Connector
Frame Grabber
Connector
Channel Link
Signal
1
1
inner shield
inner shield
1
1
inner shield
14
14
inner shield
inner shield
14
14
inner shield
2
25
Y0-
Pair 1-
2
25
X0-
15
12
Y0+
Pair 1+
15
12
X0+
3
24
Y1-
Pair 2-
3
24
X1-
16
11
Y1+
Pair 2+
16
11
X1+
4
23
Y2-
Pair 3-
4
23
X2-
17
10
Y2+
Pair 3+
17
10
X2+
5
22
Yclk-
Pair 4-
5
22
Xclk-
18
9
Yclk+
Pair 4+
18
9
Xclk+
6
21
Y3-
Pair 5-
6
21
X3-
19
8
Y3+
Pair 5+
19
8
X3+
7
20
100 ohm
Pair 6+
7
20
SerTC+
20
7
terminated
Pair 6-
20
7
SerTC-
8
19
Z0-
Pair 7-
8
19
SerTFG-
21
6
Z0+
Pair 7+
21
6
SerTFG+
9
18
Z1-
Pair 8-
9
18
CC1-
22
5
Z1+
Pair 8+
22
5
CC1+
10
17
Z2-
Pair 9+
10
17
CC2+
CC2-
23
4
Z2+
Pair 9-
23
4
11
16
Zclk-
Pair 10-
11
16
CC3-
24
3
Zclk+
Pair 10+
24
3
CC3+
12
15
Z3-
Pair 11+
12
15
CC4+
25
2
Z3+
Pair 11-
25
2
CC4-
13
13
inner shield
inner shield
13
13
inner shield
26
26
inner shield
inner shield
26
26
inner shield
Notes:
1. All pairs are individually shielded with aluminum foil.
2. Pair shields are wrapped aluminum out and are in contact with four internal drains (logic ground).
3. Outer braid and foil (chassis ground) are isolated from inner drains (logic ground).
4. Cable assembly compatible with Camera Link Base, Medium and Full configurations.
TS-1001-C
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
很抱歉,暂时无法提供与“14T26-SZLB-350-0LC”相匹配的价格&库存,您可以联系我们找货
免费人工找货