150210-5002-TB

3M™ Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series • • • • • • High Temperature Insulator Reflow Solder Compatible Low height helps minimize PCB stack height End Stackable Thru-hole versions are side stackable SMT parts are available in tape and reel pack with vacuum cap for automated placement applications • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3mconnector.com for compliance information (RIA E1 & C1 apply) Date Modified:July 5, 2010  TS-0519-G Sheet 1 of 4 Physical Insulator: Surface Mount: Glass Filled LCP Vertical Thru-Hole: Glass filled PCT Right Angle Thru-Hole: Glass filled PCT Contact: Material: Copper alloy Plating: Underplating: 1.27-3.8 1 μm [ 50-150 μ” ] Nickel overall Wiping Area: 0.76 μm [ 30 μ” ] Gold Solder Tails: 5.1 μm [ 200 μ” ] Matte tin or tin-lead (refer to ordering information) Marking: Orientation delta and 3M Logo (except surface mount) Electrical Current Rating: 1 A Insulation Resistance: > 1 × 109 Ω at 250 VDC Withstanding Voltage: 500 VDC at Sea Level Environmental Temperature Rating: -55°C to +105°C Process Rating: Maximum 260°C, (per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series Table 1 Contact Quantity Dimension A Tape Width Order Code 04 3.96 [0.156] n/a n/a 06 5.87 [0.231] n/a n/a 08 7.87 [0.310] 24 mm WB 10 9.88 [0.389] 24 mm WB 12 11.86 [0.467] 24 mm WB 14 13.87 [0.546] 24 mm WB 16 15.88 [0.625] 24 mm WB 18 17.88 [0.704] 44 mm WD 20 19.86 [0.782] 44 mm WD 22 21.87 [0.861] 44 mm WD 24 23.88 [0.940] 44 mm WD 26 25.88 [1.019] 44 mm WD 28 27.86 [1.097] 44 mm WD 30 29.87 [1.176] 44 mm WD 32 31.88 [1.255] 56 mm WE 34 33.88 [1.334] 56 mm WE 36 35.86 [1.412] 56 mm WE 38 37.87 [1.491] 56 mm WE 40 39.88 [1.570] 56 mm WE 42 41.88 [1.649] 56 mm WE 44 43.87 [1.727] 72 mm WF 46 45.87 [1.806] 72 mm WF 48 47.88 [1.885] 72 mm WF 50 49.89 [1.964] 72 mm WF 52 51.87 [2.042] 72 mm WF 54 53.87 [2.121] 72 mm WF 56 55.88 [2.200] 72 mm WF 58 57.86 [2.278] 88 mm WG 60 59.87 [2.357] 88 mm C mm [Inch] Tolerance Unless Noted mm WG .0 .00 ± 2.54 ± ± .127 [ ] Dimensions for Reference only Notes: 1. Tape & reel include vacuum pick-up cap for pick ‘n place handling equipment. 2. Parts in tray packaging are supplied without vacuum cap. 3. Positions per row, subtract 1, multiply by 2 mm spacing. 4. Optional locator posts: Positions per row, multiply by 2 mm, then subtract 4 mm. Note: Mate point same for all board mount types. **Optional Locator Posts available for positions eight and greater. Ordering Information 1502XX-20X0-XX-XX Number of positions (See Table 1) Board Location Post 0 = None (Standard) 2 = With board location post (Special order) 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com Packaging style: Blank = tray packaging WX = tape & reel pkg (see Table 1 for ordering code) Plating suffix: RB = 0.76 μm [30 μ”] Gold with matte tin solder tails (RIA E1 & C1 apply) TB = 0.76 μm” [30 μ] Gold with tin-lead solder tails (RIA E3 & C2 apply) TS-0519-G Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series Table 1 Contact Quantity Dimension A 04 3.96 [0.156] 06 5.87 [0.231] 08 7.87 [0.310] 10 9.88 [0.389] 12 11.86 [0.467] 14 13.87 [0.546] 16 15.88 [0.625] 18 17.88 [0.704] 20 19.86 [0.782] 22 21.87 [0.861] 24 23.88 [0.940] 26 25.88 [1.019] 28 27.86 [1.097] 30 29.87 [1.176] 32 31.88 [1.255] 34 33.88 [1.334] 36 35.86 [1.412] 38 37.87 [1.491] 40 39.88 [1.570] 42 41.88 [1.649] 44 43.87 [1.727] 46 45.87 [1.806] 48 47.88 [1.885] 50 49.89 [1.964] 52 51.87 [2.042] 54 53.87 [2.121] 56 55.88 [2.200] 58 57.86 [2.278] 60 59.87 [2.357] C mm [Inch] Recommended Hole Pattern Tolerance Unless Noted .0 mm .00 .000 ± 2.54 ± .254 ± [ ] Dimensions for Reference only Ordering Information 1502XX-600X-XX Number of positions (See Table 1) 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com Solder Tail Length Dimension B 1 = .1.4 mm (Special order) 2 = 2.54 mm (Standard) Plating suffix: RB = 0.76 μm [30 μ”] Gold with matte tin solder tails (RIA E1 & C1 apply) TB = 0.76 μm [30 μ”] Gold with tin-lead solder tails (RIA E3 & C2 apply) TS-0519-G Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series Table 1 Contact Quantity Dimension A 08 7.87 [0.310] 10 9.88 [0.389] 12 11.86 [0.467] 14 13.87 [0.546] 16 15.88 [0.625] 18 17.88 [0.704] 20 19.86 [0.782] 22 21.87 [0.861] 24 23.88 [0.940] 26 25.88 [1.019] 28 27.86 [1.097] 30 29.87 [1.176] 32 31.88 [1.255] 34 33.88 [1.334] 36 35.86 [1.412] 38 37.87 [1.491] 40 39.88 [1.570] 42 41.88 [1.649] 44 43.87 [1.727] 46 45.87 [1.806] 48 47.88 [1.885] 50 49.89 [1.964] 52 51.87 [2.042] 54 53.87 [2.121] 56 55.88 [2.200] 58 57.86 [2.278] 60 59.87 [2.357] C Recommended Hole Pattern Table 2 mm [Inch] Dimensions Standoff Height Code B C D E F 0 .015 [0.38] .065 [1.65] .179 [4.55] .100 [2.54] .040 [1.02] 1 .053 [1.35] .103 [2.62] .217 [5.51] .100 [2.54] .040 [1.02] 2 .028 [0.71] .078 [1.98] .192 [4.88] .125 [3.18] .015 [0.38] Tolerance Unless Noted .0 mm .00 .000 ± 2.54 ± .254 ± .127 [ ] Dimensions for Reference only Ordering Information 1502XX-5XX2-XX Number of positions (See Table 1) Standoff Height Code (see table 2, Dim B) 0 = 0.38 mm(Standard) 1 = 1.135 mm (Special order) 2 = 0.71 mm (Special order Avail. for 40, 44 and 50 position only) 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com Plating suffix: RB = 0.76 μm [30 μ”] Gold with matte tin solder tails (RIA E1 & C1 apply) TB = 0.76 μm [30 μ”] Gold with tin-lead solder tails (RIA E3 & C2 apply) TS-0519-G Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. © 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.