150224-2020-RB

8 7 6 5 4 3 2 1 NOTES 3MTM BOARDMOUNT SOCKET, 1502 SERIES 1. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION. 2.00MM X 2.00MM STRAIGHT AND SURFACE MOUNT, PLATED THROUGH HOLE 2 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. D D 3 TAPE & REEL INCLUDE VACUUM PICK-UP CAP FOR PICK 'n PLACE HANDLING EQUIPMENT. 2 6 OPTIONAL LOCATOR POSTS: POSITIONS PER ROW, MULTIPLY BY 2MM SPACING, THEN SUBTRACT 4MM. POSTS ARE ONLY AVAILABLE FOR POSITIONS 08 AND GREATER. C HIGH TEMP THERMOPLASTIC COPPER ALLOY 1.27-3.8 m {50-150 "} NICKEL-OVERALL .76 m {30 "} GOLD 5.1 m [200 "] MATTE TIN (RIA E1 & C1 APPLY) ORIENTATION DELTA AND 3M LOGO (EXCEPT SURFACE MOUNT) K REVISION ELECTRICAL: CURRENT RATING: VOLTAGE RATING: INSULATION RESISTANCE: WITHSTANDING VOLTAGE: 2 POSITIONS PER ROW, SUBTRACT 1, MULTIPLY BY 2MM SPACING. 1A 150VAC PER EIA-364-20 >1 X 109 OHm AT 250VDC 500VDC AT SEA LEVEL DRAWING NUMBER 2 5 PHYSICAL: INSULATOR: MATERIAL: CONTACT: MATERIAL: PLATING: UNDER PLATING: WIPING AREA: SOLDER TAILS: MARKING: STRAIGHT VERSION PARTS IN TRAY PACKAGING ARE SUPPLIED WITHOUT VACUUM CAP. 78-5100-0519-8 C 4 ENVIRONMENTAL: TEMPERATURE RATING: -55 C TO 105 C PROCESS RATING: MAX. 260 C (PER J-STD-020C) MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) B SURFACE MOUNT VERSION DIMENSIONS: MM [INCH] [INCH] FOR REF. ONLY DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION K 63282 REV ECO 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com R DATE CASTIGLIONE SEP 03,2015 CHKD DATE 8 6 1 THIRD ANGLE PROJECTION MAX SURFACE ROUGHNESS UL FILE NO: E68080 ALL SURFACES MARKED ONLY 7 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED INTERPRET PER ASME Y14.5 - 2009 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 ISSUE DATE AND DESCRIPTION DRFT DIVISION CODE SCALE 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 2 .0 .3 .00 .13 .000 .005 ANGLES JNC ARM REDRAWN & REMOVED RIGHT ANGLE EMSD DO NOT SCALE DRAWING SEP 03,2015 MN 55144 DRFT CHKD MFG DATE APPVL DATE a. MATHEWS SEP 03,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE BOARDMOUNT SOCKET, 2MM X 2MM, STRAIGHT & SMT, PAC 20 CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-0519-8 MODEL 1502 DET. LISTS 1 YES NO K SHT 1 OF 4 Imaged: K.3 Central Standard Time12/7/2017UTC Offset B A 8 7 6 5 4 3 2 1 3MTM BOARDMOUNT SOCKET, 1502 SERIES 2.00MM X 2.00MM STRAIGHT AND SURFACE MOUNT, PLATED THROUGH HOLE D D TABLE 1 CONTACT DIM. "A" QTY. 04 3.96 [.156] 06 5.87 [.231] 08 7.87 [.310] 10 9.88 [.389] 12 11.86 [.467] 14 13.87 [.546] 16 15.88 [.625] 18 17.88 [.704] 20 19.86 [.782] 22 21.87 [.861] 24 23.88 [.940] 26 25.88 [1.019] 28 27.86 [1.097] 30 29.87 [1.176] 32 31.88 [1.255] 34 33.88 [1.334] 36 35.86 [1.412] 38 37.87 [1.491] 40 39.88 [1.570] 42 41.88 [1.649] 44 43.87 [1.727] 46 45.87 [1.806] 48 47.88 [1.885] 50 49.89 [1.964] 52 51.87 [2.042] 54 53.87 [2.121] 56 55.88 [2.200] 58 57.86 [2.278] 60 59.87 [2.357] 2.00 .079 SEE NOTE 5 TYP. 1.09 .043 C MATE POINT 4.50 .177 .71 .028 STANDOFF 2.00 .51 DIM. "B" .020 DIM. "B" TYP. TAIL .25 .079 .010 DRAWING NUMBER (SEE ORDERING INFO) C K .151 REVISION 3.84 78-5100-0519-8 DIM. "A" SEE TABLE 1 .71 SEE NOTE 5 .08 [ .003] .003 AFTER PLATING TYP. 2.00 2.00 .079 CONTACT QTY.: SEE TABLE 1 SOLDER TAIL LENGTH: DIMENSION "B" 1 = 1.4MM (SPECIAL ORDER) 2 = 2.54MM (STANDARD) .08 .079 RECOMMENDED HOLE PATTERN (AS VIEWED FROM CONNECTOR SIDE) ORDERING INFORMATION STRAIGHT 1502XX-600X-RB .08 .028 B .003 .08 .003 TOLERANCE NON-ACCUM. TYP. K 63282 NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO DO NOT SCALE DRAWING DATE CASTIGLIONE SEP 03,2015 CHKD DATE DIVISION CODE 6 1 INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 6 ISSUE DATE AND DESCRIPTION DRFT EMSD 7 JNC ARM REDRAWN & REMOVED RIGHT ANGLE DESIGN REFERENCE 8 SEP 03,2015 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 2 .0 .3 .00 .13 .000 .005 ANGLES MN 55144 DRFT CHKD MFG DATE APPVL DATE a. MATHEWS SEP 03,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE BOARDMOUNT SOCKET, 2MM X 2MM, STRAIGHT & SMT, PAC 20 CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-0519-8 MODEL 1502 DET. LISTS 1 YES NO K SHT 2 OF 4 Imaged: K.3 Central Standard Time12/7/2017UTC Offset B A 8 7 6 5 4 3 2 1 3MTM BOARDMOUNT SOCKET, 1502 SERIES 2.00MM X 2.00MM STRAIGHT AND SURFACE MOUNT, PLATED THROUGH HOLE TABLE 1 CONTACT QTY. 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 D DIM. "A" SEE TABLE 1 5.08 .200 5.33 3.84 .210 .151 2.00 SEE NOTE 5 .079 TYP. C OPTIONAL VACUUM CAP .51 1.09 .043 .020 3.96 [.156] 5.87 [.231] 7.87 [.310] 9.88 [.389] 11.86 [.467] 13.87 [.546] 15.88 [.625] 17.88 [.704] 19.86 [.782] 21.87 [.861] 23.88 [.940] 25.88 [1.019] 27.86 [1.097] 29.87 [1.176] 31.88 [1.255] 33.88 [1.334] 35.86 [1.412] 37.87 [1.491] 39.88 [1.570] 41.88 [1.649] 43.87 [1.727] 45.87 [1.806] 47.88 [1.885] 49.89 [1.964] 51.87 [2.042] 53.87 [2.121] 55.88 [2.200] 57.86 [2.278] 59.87 [2.357] TAPE WIDTH N/A N/A 24 MM 24 MM 24 MM 24 MM 24 MM 44 MM 44 MM 44 MM 44 MM 44 MM 44 MM 44 MM 56 MM 56 MM 56 MM 56 MM 56 MM 56 MM 72 MM 72 MM 72 MM 72 MM 72 MM 72 MM 72 MM 88 MM 88 MM ORDER CODE N/A N/A D WB WB WB WB WB WD WD WD WD WD WD WD WE WE WE WE WE WE WF WF WF WF WF WF WF C WG WG REVISION MATE POINT DIM. "A" K 4.65 .51 .020 5.59 TYP. .220 1.30 .25 DRAWING NUMBER 2X OPTIONAL LOCATING POST SEE NOTE 6 78-5100-0519-8 .183 .051 .010 SEE NOTE 6 B 2X 1.40 .055 .76 .030 1.52 .060 TYP. TYP. .08 ORDERING INFORMATION SURFACE MOUNT 1502XX-20X0-RB-XX 5.59 .003 .220 2.00 .079 SEE NOTE 6 SEE NOTE 5 CONTACT QTY.: SEE TABLE 1 BOARD LOCATION POST: 0 = NONE (STANDARD) 2 = WITH BOARD LOCATION POSTS (SPECIAL ORDER) .08 .003 PACKAGING STYLE: BLANK = TRAY PACKAGING WX = TAPE & REEL PACKAGING (SEE TABLE 1 FOR ORDERING CODE) K TOLERANCE NON-ACCUM. TYP. DESIGN REFERENCE RECOMMENDED PAD PATTERN (AS VIEWED FROM CONNECTOR SIDE) NEXT ASSEMBLY DIVISION ECO DO NOT SCALE DRAWING DATE CASTIGLIONE SEP 03,2015 CHKD DATE 6 1 ALL SURFACES MARKED ONLY 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED MAX SURFACE ROUGHNESS 6 JNC ARM ISSUE DATE AND DESCRIPTION DRFT EMSD SCALE INTERPRET PER ASME Y14.5 - 2009 7 REV DIVISION CODE THIRD ANGLE PROJECTION 8 SEP 03,2015 REDRAWN & REMOVED RIGHT ANGLE ACCESS CODES A 63282 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 2 .0 .3 .00 .13 .000 .005 ANGLES MN 55144 DRFT CHKD MFG DATE APPVL DATE a. MATHEWS SEP 03,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE BOARDMOUNT SOCKET, 2MM X 2MM, STRAIGHT & SMT, PAC 20 CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-0519-8 MODEL 1502 DET. LISTS 1 YES NO K SHT 3 OF 4 Imaged: K.3 Central Standard Time12/7/2017UTC Offset B A 8 7 6 5 4 3 2 1 D D Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. C DRAWING NUMBER 78-5100-0519-8 K REVISION Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. B B K 63282 SEP 03,2015 JNC ARM REDRAWN & REMOVED RIGHT ANGLE DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO DATE CASTIGLIONE SEP 03,2015 CHKD DATE DIVISION CODE EMSD DO NOT SCALE DRAWING 1 1 INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 8 ISSUE DATE AND DESCRIPTION DRFT 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 2 .0 .3 .00 .13 .000 .005 ANGLES MN 55144 DRFT CHKD MFG DATE APPVL DATE a. MATHEWS SEP 03,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE BOARDMOUNT SOCKET, 2MM X 2MM, STRAIGHT & SMT, PAC 20 CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-0519-8 MODEL 1502 DET. LISTS 1 YES NO K SHT 4 OF 4 Imaged: K.3 Central Standard Time12/7/2017UTC Offset C A