159110-2012

8 7 6 5 4 3 2 1 NOTES 3MTM Shrouded Board Mount Header 2 mm X 2 mm Pitch 159 Series, Standard Length 3 and Extended Length 1 MATERIAL: BODY: HIGH TEMPERATURE GLASS FILLED LCP, BLACK UL94V-0 CONTACTS: COPPER ALLOY 4 2 PLATING: 2.03-3.81 m [80-150 in] NICKEL UNDERPLATE. 0.38 m [15 in] OR 0.76 m [30 in] AVG GOLD ON WIPING AREA. 5.08 m [200 in] MIN MATTE TIN ON SOLDER TAILS. D DIM A DIM B 3 STANDARD LENGTH HEADERS MATE WITH 3MTM SOCKETS, 158 SERIES (REFERENCE 3M DRAWING 78-5100-2358-9). 2.00 .079 2.00 TYP .079 4 EXTENDED LENGTH HEADERS MATE WITH 3MTM SOCKETS, 870 SERIES. SINGLE FRICTION LATCH THRU-HOLE VERTICAL HEADER 6-12 POSITIONS ONLY 4.43 5 FOR PRODUCT SPECIFICATIONS AND WARRANTY INFORMATION SEE 3M 78-5102-0078-1. DIM C C 3.43 .135 PIN 1 INDICATOR 7 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 0.51 0.020 SQ TYP A POLARIZATION SLOT AND DUAL FRICTION LATCHES THRU-HOLE VERTICAL HEADER 14-50 POSITIONS 3.89 5.33 8 PACKAGING: VERTICAL THRU: TRAY RIGHT ANGLE: TRAY VERTICAL SMT: TAPE & REEL .153 .210 PERFORMANCE 5 7 3.61 1.25 A, ALL LINES ENERGIZED CURRENT: 2.75 A, 6 LINES ENERGIZED 4.75 A, 1 LINE ENERGIZED DIM D .142 B 2.00 INSULATION RESISTANCE: >1 X 109 OHMS AT 500 VDC B VOLTAGE RATING: 150 VAC PER EIA-364-20 .079 WITHSTANDING VOLTAGE: 500 VACrms AT SEA LEVEL F 52868 MAR 05,2014 E SOLDER PROCESS TEMPERATURE: DEC 16,2013 D 41488 JUN 20,2012 C B SECTION A-A APR 18,2012 34080 MAY 18,2011 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES 30741 OCT 28,2010 REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE L. SCHMIDT JUL 29,2010 CHKD DATE DIVISION CODE C 3M Center RECOMMENDED PCB HOLE PATTERN TOLERANCE = 0.05 [.002] METRIC [ENGLISH] DO NOT SCALE DRAWING 6 1 THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 1994 UL FILE NO: E68080 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE R 6 LDS SF LDS SF DRFT CHKD INITIAL RELEASE DIVISION 7 LDS SAN ADDED 6.19 DIM ON SHT 2; REVISED & MOVED TABLE TO SHT 5 A 0.90 0.036 39876 REMOVED 32 POS FROM TABLE ON SHT 5 REFERENCE TABLE ON SHEET 5 FOR AVAILABLE POSITIONS AND SOLDER TAIL LENGTHS 2.00 .079 8 LDS SAN REVISED CURRENT RATING IN PERFORMANCE TABLE 1.74 .07 AFTER PLATING TYP SJS SAN ADD UL SYMBOLS MATE POINT A 51692 260 C MAX PER IPC/JEDEC J-STD-020D 2.00 .079 TYP SJS SAN ADD TAPE & REEL, MATE PT, VOLTAGE RATING TEMPERATURE RATING: -55 C TO +105 C DIM B C F 6 SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "RoHS COMPLIANCE" SECTION OF WWW.3MCONNECTOR.COM FOR COMPLIANCE INFORMATION (RIA E1 & C1 APPLY). REVISION .174 DRAWING NUMBER .242 POLARIZATION SLOT THRU-HOLE VERTICAL HEADER 6-12 POSITIONS ONLY 78-5100-2359-7 6.13 D 2 INCHES .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 0.13 .000 ANGLES 1 MN 55144 MFG DATE APPVL DATE S FELDMAN AUG 09,2010 3M COPYRIGHT 2010 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3M SHROUDED BOARD MOUNT HEADER 2 MM X 2 MM PITCH 159 SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2359-7 DET. LISTS 1 YES NO F SHT 1 OF 5 A 8 7 6 5 4 3MTM Shrouded Board Mount Header 2 mm X 2 mm Pitch 159 Series, Standard Length 3 3 and Extended Length 2 1 4 D D DIM A DIM B 2.00 .079 TYP POLARIZATION SLOT RIGHT ANGLE HEADER 6-12 POSITIONS ONLY 2.00 6.13 .242 .079 4.43 .174 C C DIM C TYP .135 DIM D F 3.43 3.89 5.33 6.19 .153 .210 .244 3.61 B DRAWING NUMBER POLARIZATION SLOT AND DUAL FRICTION LATCHES RIGHT ANGLE HEADER 14-50 POSITIONS 0.020 REVISION SQ 78-5100-2359-7 0.51 PIN 1 INDICATOR B .142 2.00 B .079 F 52868 MAR 05,2014 SJS SAN ADD TAPE & REEL, MATE PT, VOLTAGE RATING SINGLE FRICTION LATCH RIGHT ANGLE HEADER 6-12 POSITIONS ONLY 2.00 .079 E 51692 DEC 16,2013 SJS SAN ADD UL SYMBOLS D 41488 JUN 20,2012 LDS SAN REVISED CURRENT RATING IN PERFORMANCE TABLE C 0.90 0.036 .079 TYP DIM B B 34080 A 30741 OCT 28,2010 SF LDS SF DRFT CHKD INITIAL RELEASE SECTION NEXT ASSEMBLY ACCESS CODES B-B DIVISION REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE L. SCHMIDT JUL 29,2010 CHKD DATE DIVISION CODE C 3M Center METRIC [ENGLISH] REFERENCE TABLE ON SHEET 5 FOR AVAILABLE POSITIONS AND SOLDER TAIL LENGTHS DO NOT SCALE DRAWING 4 1 INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 6 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 125 7 LDS ADDED 6.19 DIM ON SHT 2; REVISED & MOVED TABLE TO SHT 5 AFTER PLATING TYP RECOMMENDED PCB HOLE PATTERN TOLERANCE = 0.05 [.002] 8 LDS SAN MAY 18,2011 MATE POINT DESIGN REFERENCE A APR 18,2012 REMOVED 32 POS FROM TABLE ON SHT 5 1.74 .07 2.00 39876 2 INCHES .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 0.13 .000 ANGLES 1 MN 55144 MFG DATE APPVL DATE S FELDMAN AUG 09,2010 3M COPYRIGHT 2010 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3M SHROUDED BOARD MOUNT HEADER 2 MM X 2 MM PITCH 159 SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2359-7 DET. LISTS 1 YES NO F SHT 2 OF 5 A 8 7 6 5 4 3MTM Shrouded Board Mount Header 2 mm X 2 mm Pitch 159 Series, Standard Length 3 3 and Extended Length 2 1 4 DIM A D D DIM B 2.00 .079 TYP 2.00 6.13 .242 POLARIZATION SLOT SURFACE MOUNT HEADER 6-12 POSITIONS ONLY .079 4.43 .174 6.35 .250 SQUARE C C 3.43 .135 POLARIZATION SLOT AND DUAL FRICTION LATCHES SURFACE MOUNT HEADER 14-50 POSITIONS SQ 0.020 C F TYP 78-5100-2359-7 PIN 1 INDICATOR 0.51 3.89 6.82 6.44 .153 .269 .254 3.61 B .142 8.03 0.10 [.004] ALL SURFACES DRAWING NUMBER OPTIONAL VACUUM CAP REVISION DIM C B .316 DIM B F SINGLE FRICTION LATCH SURFACE MOUNT HEADER 6-12 POSITIONS ONLY 2.00 .079 TYP 52868 MAR 05,2014 ADD TAPE & REEL, MATE PT, VOLTAGE RATING E 51692 DEC 16,2013 D 41488 JUN 20,2012 MATE POINT LDS SAN REVISED CURRENT RATING IN PERFORMANCE TABLE C 39876 APR 18,2012 8.90 LDS SAN REMOVED 32 POS FROM TABLE ON SHT 5 .350 B 34080 MAY 18,2011 3.70 .146 SECTION 1.02 .040 C-C A NEXT ASSEMBLY ACCESS CODES DIVISION OCT 28,2010 REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE L. SCHMIDT JUL 29,2010 CHKD DATE DIVISION CODE C DO NOT SCALE DRAWING 4 1 METRIC [ENGLISH] INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 6 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 7 30741 3M Center RECOMMENDED PCB PAD PATTERN TOLERANCE = 0.08 [.003] SF LDS SF DRFT CHKD INITIAL RELEASE DESIGN REFERENCE TYP LDS ADDED 6.19 DIM ON SHT 2; REVISED & MOVED TABLE TO SHT 5 REFERENCE TABLE ON SHEET 5 FOR AVAILABLE POSITIONS TYP 8 SJS SAN ADD UL SYMBOLS 1.74 .07 A SJS SAN 2 INCHES .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 0.13 .000 ANGLES 1 MN 55144 MFG DATE APPVL DATE S FELDMAN AUG 09,2010 3M COPYRIGHT 2010 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3M SHROUDED BOARD MOUNT HEADER 2 MM X 2 MM PITCH 159 SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2359-7 DET. LISTS 1 YES NO F SHT 3 OF 5 A 8 7 6 5 4 3MTM Shrouded Board Mount Header 2 mm X 2 mm Pitch 159 Series, Standard Length 3 2 1 STANDARD LENGTH HEADERS ARE AVAILABLE 3 D D STANDARD LENGTH, SINGLE FRICTION LATCH, VERTICAL HEADER 6-12 POSITIONS STANDARD LENGTH, POLARIZATION SLOT, RIGHT ANGLE HEADER 6-12 POSITIONS STANDARD LENGTH, POLARIZATION SLOT, DUAL FRICTION LATCHES, RIGHT ANGLE HEADER 14-50 POSITIONS STANDARD LENGTH, POLARIZATION SLOT, SURFACE MOUNT HEADER 6-12 POSITIONS STANDARD LENGTH, POLARIZATION SLOT, DUAL FRICTION LATCHES, SURFACE MOUNT HEADER 14-50 POSITIONS STANDARD LENGTH, SINGLE FRICTION LATCH, SURFACE MOUNT HEADER 6-12 POSITIONS C CALL 3M INTERCONNECT SOLUTIONS AT 800-225-5373 FOR AVAILABILITY OF EXTENDED LENGTH HEADERS 4 EXTENDED LENGTH, POLARIZATION SLOT, VERTICAL HEADER 6-12 POSITIONS EXTENDED LENGTH, POLARIZATION SLOT, DUAL FRICTION LATCHES, VERTICAL HEADER 14-50 POSITIONS EXTENDED LENGTH, SINGLE FRICTION LATCH, VERTICAL HEADER 6-12 POSITIONS EXTENDED LENGTH, POLARIZATION SLOT, RIGHT ANGLE HEADER 6-12 POSITIONS EXTENDED LENGTH, POLARIZATION SLOT, DUAL FRICTION LATCHES, RIGHT ANGLE HEADER 14-50 POSITIONS EXTENDED LENGTH, SINGLE FRICTION LATCH, RIGHT ANGLE HEADER 6-12 POSITIONS EXTENDED LENGTH, POLARIZATION SLOT, SURFACE MOUNT HEADER 6-12 POSITIONS EXTENDED LENGTH, POLARIZATION SLOT, DUAL FRICTION LATCHES, SURFACE MOUNT HEADER 14-50 POSITIONS 78-5100-2359-7 F 3MTM Shrouded Board Mount Header 2 mm X 2 mm Pitch 159 Series, Extended Length STANDARD LENGTH, SINGLE FRICTION LATCH, RIGHT ANGLE HEADER 6-12 POSITIONS EXTENDED LENGTH, SINGLE FRICTION LATCH, SURFACE MOUNT HEADER 6-12 POSITIONS B REVISION C STANDARD LENGTH, POLARIZATION SLOT, DUAL FRICTION LATCHES, VERTICAL HEADER 14-50 POSITIONS DRAWING NUMBER STANDARD LENGTH, POLARIZATION SLOT, VERTICAL HEADER 6-12 POSITIONS ONLY B ORDERING INFORMATION F TIER 1 - BEST POSITION COUNT (SEE TABLE) PART CONFIGURATION 2 = VERTICAL SMT 5 = RIGHT ANGLE THRU HOLE 6 = VERTICAL THRU HOLE BODY LENGTH 0 = STANDARD LENGTH (MATES TO 158 SERIES) 1 = EXTENDED LENGTH (MATES TO 870 SERIES) A E 1592XX-XXXX CONTACT TAIL LENGTH 2 = 2.84 mm [.112] 3 = 3.94 mm [.155] POLARIZATION/LATCHING 0 = POLARIZATION SLOT AND DUAL FRICTION LATCHES (14-50 POSITIONS ONLY) 1 = POLARIZATION SLOT (6-12 POSITIONS ONLY) 2 = SINGLE FRICTION LATCH (6-12 POSITIONS ONLY) TIER 2 = BETTER 0.38 m [15 in] GOLD D POLARIZATION/LATCHING 0 = POLARIZATION SLOT AND DUAL FRICTION LATCHES (14-50 POSITIONS ONLY) 1 = POLARIZATION SLOT (6-12 POSITIONS ONLY) 2 = SINGLE FRICTION LATCH (6-12 POSITIONS ONLY) BODY LENGTH 0 = STANDARD LENGTH (MATES TO 158 SERIES) 1 = EXTENDED LENGTH (MATES TO 870 SERIES) B A JUN 20,2012 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES DIVISION 39876 APR 18,2012 34080 DO NOT SCALE DRAWING 125 30741 OCT 28,2010 REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE L. SCHMIDT JUL 29,2010 CHKD DATE DIVISION CODE C St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 4 1 ALL SURFACES MARKED ONLY 3 LDS SAN MAY 18,2011 3M Center 4 LDS SAN LDS SF LDS SF DRFT CHKD INITIAL RELEASE MAX SURFACE ROUGHNESS 5 41488 ADDED 6.19 DIM ON SHT 2; REVISED & MOVED TABLE TO SHT 5 INTERPRET PER ASME Y14.5 - 1994 6 SJS SAN REMOVED 32 POS FROM TABLE ON SHT 5 THIRD ANGLE PROJECTION 7 DEC 16,2013 REVISED CURRENT RATING IN PERFORMANCE TABLE C PART CONFIGURATION 2 = VERTICAL SMT 5 = RIGHT ANGLE THRU HOLE 6 = VERTICAL THRU HOLE 51692 ADD UL SYMBOLS CONTACT TAIL LENGTH 2 = 2.84 mm [.112] 3 = 3.94 mm [.155] POSITION COUNT (SEE TABLE) SJS SAN ADD TAPE & REEL, MATE PT, VOLTAGE RATING METRIC [ENGLISH] 8 MAR 05,2014 TIER 2 - BETTER 1591XX-XXXX TIER 1 = BEST 0.76 m [30 in] GOLD 52868 2 INCHES .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 0.13 .000 ANGLES 1 MN 55144 MFG DATE APPVL DATE S FELDMAN AUG 09,2010 3M COPYRIGHT 2010 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3M SHROUDED BOARD MOUNT HEADER 2 MM X 2 MM PITCH 159 SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2359-7 DET. LISTS 1 YES NO F SHT 4 OF 5 A 8 7 6 5 4 3MTM Shrouded Board Mount Header 2 mm X 2 mm Pitch 159 Series, Standard Length 3 3 and Extended Length 2 1 4 SHROUDED BOX HEADER DIM B EXTENDED STANDARD EXTENDED DIM D [.329] 9.52 [.375] 4.00 [.157] 6.83 [.269] 7.99 [.315] 2.84 [.112] 3.94 [.155] 8 10.35 [.407] 11.52 [.453] 6.00 [.236] 8.83 [.347] 9.99 [.393] 2.84 [.112] 3.94 [.155] 10 12.35 [.486] 13.52 [.532] 8.00 [.315] 10.83 [.426] 11.99 [.472] 2.84 [.112] 3.94 [.155] 12 14.35 [.565] 15.52 [.611] 10.00 [.394] 12.83 [.505] 13.99 [.551] 2.84 [.112] 3.94 [.155] 14 16.35 [.644] 17.52 [.690] 12.00 [.472] 14.83 [.584] 15.99 [.630] 2.84 [.112] 3.94 [.155] 16 18.35 [.722] 19.52 [.768] 14.00 [.551] 16.83 [.662] 17.99 [.708] 2.84 [.112] 3.94 [.155] 20 22.35 [.880] 23.52 [.926] 18.00 [.709] 20.83 [.820] 21.99 [.866] 2.84 [.112] 3.94 [.155] 22 24.35 [.959] 25.52 [1.005] 20.00 [.787] 22.83 [.899] 23.99 [.945] 2.84 [.112] 3.94 [.155] 24 26.35 [1.037] 27.52 [1.083] 22.00 [.866] 24.83 [.977] 25.99 [1.023] 2.84 [.112] 3.94 [.155] 26 28.35 [1.116] 29.52 [1.162] 24.00 [.945] 26.83 [1.056] 27.99 [1.102] 2.84 [.112] 3.94 [.155] 30 32.35 [1.274] 33.52 [1.320] 28.00 [1.102] 30.83 [1.214] 31.99 [1.260] 2.84 [.112] 3.94 [.155] 34 36.35 [1.431] 37.52 [1.477] 32.00 [1.260] 34.83 [1.371] 35.99 [1.417] 2.84 [.112] 3.94 [.155] 40 42.35 [1.667] 43.52 [1.713] 38.00 [1.496] 40.83 [1.607] 41.99 [1.653] 2.84 [.112] 3.94 [.155] 44 46.35 [1.825] 47.52 [1.871] 42.00 [1.654] 44.83 [1.765] 45.99 [1.811] 2.84 [.112] 3.94 [.155] 50 52.35 [2.061] 53.52 [2.107] 48.00 [1.890] 50.83 [2.001] 51.99 [2.047] 2.84 [.112] 3.94 [.155] NUMBER OF POSITIONS 6 8 10 12 14 16 20 22 24 26 30 34 40 44 50 DIM F +/- 0.10 14.20 (.559) 20.20 (.795) 14.20 (.559) 20.20 (.795) 14.20 (.559) 20.20 (.795) 20.20 (.795) 26.20 (1.031) 20.20 (.795) 26.20 (1.031) 26.20 (1.031) 26.20 (1.031) 34.20 (1.346) 34.20 (1.346) 34.20 (1.346) DIM Ko +/- 0.10 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) 7.46 (.294) DIM So +/- 0.10 28.40 (1.118) 40.40 (1.591) 28.40 (1.118) 40.40 (1.591) 28.40 (1.118) 40.40 (1.591) 40.40 (1.591) 52.40 (2.063) 40.40 (1.591) 52.40 (2.063) 52.40 (2.063) 52.40 (2.063) 68.40 (2.693) 68.40 (2.693) 68.40 (2.693) DIM W +/- 0.30 32 (1.26) 44 (1.73) 32 (1.26) 44 (1.73) 32 (1.26) 44 (1.73) 44 (1.73) 56 (2.20) 44 (1.73) 56 (2.20) 56 (2.20) 56 (2.20) 72 (2.83) 72 (2.83) 72 (2.83) C 78-5100-2359-7 C D F 8.35 REVISION STANDARD DIM C 6 D B DIM A DRAWING NUMBER NUMBER OF POSITIONS B F 52868 MAR 05,2014 SJS SAN ADD TAPE & REEL, MATE PT, VOLTAGE RATING DIM Ko E 51692 DEC 16,2013 SJS SAN ADD UL SYMBOLS D 41488 JUN 20,2012 LDS SAN REVISED CURRENT RATING IN PERFORMANCE TABLE C 39876 APR 18,2012 LDS SAN REMOVED 32 POS FROM TABLE ON SHT 5 B .059 +.004 -.000 34080 MAY 18,2011 SF LDS SF DRFT CHKD ADDED 6.19 DIM ON SHT 2; REVISED & MOVED TABLE TO SHT 5 .157 .079 PIN 1 LDS A 30741 OCT 28,2010 INITIAL RELEASE .069 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION ECO ISSUE DATE AND DESCRIPTION DRFT DATE L. SCHMIDT JUL 29,2010 CHKD DATE DIVISION CODE C 3M Center +.006 .067 -.002 DIM SO DIM W .011 DO NOT SCALE DRAWING 1 1 THIRD ANGLE PROJECTION +.004 -.000 INTERPRET PER ASME Y14.5 - 1994 .630 MAX SURFACE ROUGHNESS METRIC [ENGLISH] 125 ALL SURFACES MARKED ONLY 8 7 6 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE DIM F .059 REV 2 INCHES .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 0.13 .000 ANGLES 1 MN 55144 MFG DATE APPVL DATE S FELDMAN AUG 09,2010 3M COPYRIGHT 2010 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3M SHROUDED BOARD MOUNT HEADER 2 MM X 2 MM PITCH 159 SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2359-7 DET. LISTS 1 YES NO F SHT 5 OF 5 A