1SF26-L136-00C-200

3M™ Shrunk Delta Ribbon (SDR) Cable Assembly .80 mm High Speed Digital Data Transmission, 26 position 1SF26-L1XX-00C-XXX • Supports AIA Industrial Camera Link® Standard for Mini C/L camera to frame grabber applications • 11 shielded, twisted twinax pairs with four drain wires • Double overall shield with inner foil and outer braid • Rugged ribbon contact type • Rugged thumbscrew retention • EMI shielded overmolded junction shell • Optional R/A overmolded backshells eliminate bend radius • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3M.com/Interconnect for compliance information (RIA E1 & C1 apply) Date Modified: August 10, 2009  TS-2120-D Sheet 1 of 4 Physical Connector Contact Plating: Wiping Area: 30 μ" [ 0.76 μm ] Min Gold Underplating: 100 μ" [ 2.55 μm ] Nickel Overmolded Shell: Color: Black Material: Polyvinyl Chloride (PVC) Cable: Color: Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Marking: 3M Logo Electrical Voltage Rating: 30 V Current Rating: 0.5 A Insulation Resistance: 1 X 108 Ω min at 100 VDC Withstanding Voltage: 125 VAC RMS for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 ± 10Ω Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Skew (within pair): 50 ps / meter maximum Skew (channel skew per chipset ): 50 ps / meter maximum Environmental Temperature Rating: 0°C to +70°C UL File No.: E86982 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Camera Link is a certification mark of Automated Imaging Association 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Shrunk Delta Ribbon (SDR) Cable Assembly .80 mm High Speed Digital Data Transmission, 26 position High Density SDR plug 26 Position 1SF26-L1XX-00C-XXX High Density SDR plug 26 Position LENGTH Cable (See pinout for cable construction) 2X M2.0 Thumbscrew 2X M2.0 Thumbscrew 2X 22.0 [.87] Figure 1 Straight SDR to Straight SDR Cable Assembly Option 20 24.4 [.96] 1 2 3 4 5 6 7 8 9 10 11 12 13 9.0 [.35] 12.0 [.47] 14 15 16 17 18 19 20 21 22 23 24 25 26 Figure 2 Straight SDR to Straight SDR Cable Assembly mm [inch] Tolerance Unless Noted mm .0 ± .1 .00 ± .01 [ ] Dimensions used for Reference Only C Note: 1. For length dimension, refer to the product ordering number. 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ TS-2120-D Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Shrunk Delta Ribbon (SDR) Cable Assembly .80 mm High Speed Digital Data Transmission, 26 position High Density Right Angle SDR plug 26 Position 1SF26-L1XX-00C-XXX High Density SDR plug 26 Position LENGTH Cable (See pinout for cable construction) 2X M2.0 Screw 16.7 [.66] 22.0 [.87] 2X M2.0 Thumbscrew Figure 3 R/A SDR to SDR Cable Assembly Options 36 & 37 24.4 [.96] 18.2 [.72] 1 2 3 4 5 6 7 8 9 10 11 12 13 9.0 [.35] 12.0 [.47] 14 15 16 17 18 19 20 21 22 23 24 25 26 9.4 [.37] Figure 4 Overmolded R/A SDR Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 Figure 5 Overmolded R/A SDR Connector (36 option) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 25.2 [.99] 14 15 16 17 18 19 20 21 22 23 24 25 26 C Figure 6 Overmolded R/A SDR Connector (37 option) mm [inch] Tolerance Unless Noted mm .0 ± .1 .00 ± .01 [ ] Dimensions used for Reference Only 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ TS-2120-D Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Shrunk Delta Ribbon (SDR) Cable Assembly .80 mm High Speed Digital Data Transmission, 26 position CN-1 Conn. Pos. 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 1 14 13 26 Shell 1SF26-L1XX-00C-XXX Base Configuration Full / Medium configuration Cable XOYOYOXOTWINAX 1 XO+ YO+ YO+ XO+ X1Y1Y1X1TWINAX 2 X1+ Y1+ Y1+ X1+ X2Y2Y2X2TWINAX 3 X2+ Y2+ Y2+ X2+ XCYclkYclkXCTWINAX 4 XC+ Yclk+ Yclk+ XC+ X3Y3Y3X3TWINAX 5 X3+ Y3+ Y3+ X3+ Ser TC+ 100 ohm 100 ohm Ser TC+ TWINAX 6 Ser TCTerminated Terminated Ser TCSer TFG- ZOZOSer TFGTWINAX 7 Ser TFG+ ZO+ ZO+ Ser TFG+ CC1Z1Z1CC1TWINAX 8 CC1+ Z1+ Z1+ CC1+ CC2+ Z2Z2CC2+ TWINAX 9 CC2Z2+ Z2+ CC2CC3ZclkZclkCC3TWINAX 10 CC3+ Zclk+ Zclk+ CC3+ Z3CC4+ CC4+ Z3TWINAX 11 CC4Z3+ Z3+ CC4INNER INNER INNER INNER SHIELD SHIELD SHIELD SHIELD INNER INNER INNER INNER SHIELD SHIELD SHIELD SHIELD DRAIN WIRE INNER INNER INNER INNER SHIELD SHIELD SHIELD SHIELD INNER INNER INNER INNER SHIELD SHIELD SHIELD SHIELD BRAID SHIELD CN-2 Conn. Pos. 25 12 24 11 23 10 22 9 21 8 20 7 19 6 18 5 17 4 16 3 15 2 1 14 13 26 Shell Table 1 Cable Assembly Wiring Diagram Ordering Information 1SF26-L1XX-00C-XXX (RIA E1 & C1 apply) 20 = SDR straight to SDR straight backshell. 36 = The direction of the cable for the RA SDR connector dresses down with respect to a horizontal board mount connector. The topology for the 36 option is a straight overmolded SDR backshell to a R/A overmolded SDR backshell. 37 = The direction of the cable for the RA SDR connector dresses up with respect to a horizontal board mount connector. The topology for the 37 option is a straight overmolded SDR backshell to a R/A overmolded SDR backshell. Notes: 1. For a cable length of less than 2m, the length tolerance is +50mm / -0mm 2. For a cable length of 2m or more, the length tolerance is +3% / -0% of cable length 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Length : 100 = 1m 200 = 2m 500 = 5m A00 = 10m Refer to length dimension in figures 1 & 3 Reference notes 1 & 2 for cable length tolerance TS-2120-D Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3mconnectors.com Please recycle. Printed in USA. © 3M 2009. All rights reserved. 3M is a trademark of 3M Company.