1W226-TZLB-250-0LC

3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Digital Data Transmission System, 26 Position 1W226-TZLB-XXX-0LC • Supports LVDS Channel Link™ signaling • Supports Camera Link® Specification V1.0 • 11 shielded pairs (100 ohm) +4 grounds for high bandwidth applications • High density 26 position MDR with rugged ribbon type contact • Overmolded backshell • Thumbscrew latching options • Used for bulkhead connection, or rack IO panel connection • Used to extend the length of a standard Camera Link® cable assembly • RoHS* compliant Date Modified: May 29, 2006 TS-2106-03 Sheet 1 of 3 Physical Connector Contact Plating Wiping Area: Shell Color: Shell Material: Cable Color: Cable Jacket Material: Cable Flammability: 30μ″ [ 0.76μm ] Min. Gold Beige Acrylonitrile Butadiene Styrene (ABS) Beige Polyvinyl Chloride (PVC) AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1A Insulation Resistance: > 1 × 108Ω at @100 Vdc Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 ± 10Ω Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Skew (within pair): 50 ps / meter maximum Skew (channel skew per chipset ): 50 ps / meter maximum Environmental Temperature Rating: -20°C to +75°C *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. Channel Link is a trademark of National Semiconductor. Camera Link is a certification mark of Automated Imaging Association. UL File No.: E86982 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Digital Data Transmission System, 26 Position 1W226-TZLB-XXX-0LC 2X Jack Socket #4-40 thread 26 Position High Density Mini D Ribbon (MDR) Male Plug 26 Position High Density Mini D Ribbon (MDR) Female Receptacle Cable (See pinout for cable construction) 2X Thumbscrew #4-40 thread 45.7 1.8 45.7 1.8 LENGTH Over-molded Over-molded#4-40 #4-40 Thumbscrew Thumbscrew mm [Inch] 39.4 1.639.4 1.6 Tolerance Unless Noted 31.3 31.27 1.2 1.23 mm 1 1 2 2 3 14 14 3 15 4 15 16 4 5 5 16 17 6 6 17 8 7 18 18 7 8 19 19 9 20 20 10 9 21 21 10 22 22 11 12 11 23 24 23 13 12 24 14.5 0.6 13 25 26 25 26 14.5 0.6 0.0 0.00 ± .1 ± .10 [ ] Dimensions for Reference only MDR 26 Position Plug MDROne 26 Position Plug End One End Over-molded #4-40 Jack Socket Over-molded #4-40 Jack Socket 39.4 1.6 39.4 1.6 31.27 1.23 31.3 1.2 13 12 11 10 13 1226 25 11 24 10 239 26 25 24 23 22 9 22 8 Assembly Length Tolerance 7 6 5 4 3 2 8 21 720 19 6 18 5 17 4 16 3 15 21 20 19 18 17 16 1 214 15 14.5 0.6 1 14 14.5 0.6 Cable Length: 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length MDR 26 Position Receptacle One End MDR 26 Position Receptacle One End Ordering Information 1W226-TZLB-XXX-0LC Note: 1. Use 3341-31 jacksocket for mounting receptacle to panel. 3M Interconnect Solutions http://www.3M.com/interconnects/ Length: 050 = .5 meters 100 = 1 meters 200 = 2 meters 250 = 2.5 meters 300 = 2 meters 350 = 3.5 meters 400 = 4 meters 450 = 4.5 meters 500 = 5 meters 600 = 6 meters 700 = 7 meters 800 = 8 meters 900 = 9 meters A00 = 10 meters TS-2106-03 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Digital Data Transmission System, 26 Position 1W226-TZLB-XXX-0LC MDR 26 Position Pinout P1 P2 Pair Signal Position Pair Signal Position shld Ishld 26 shld Ishld 26 shld Ishld 13 shld Ishld 13 1 Y0- 25 1 Y0- 25 1 Y0+ 12 1 Y0+ 12 2 Y1- 24 2 Y1- 24 2 Y1+ 11 2 Y1+ 11 3 Y2- 23 3 Y2- 23 3 Y2+ 10 3 Y2+ 10 4 Yelk- 22 4 Yelk- 22 4 Yelk+ 9 4 Yelk+ 9 5 Y3- 21 5 Y3- 21 5 Y3+ 8 5 Y3+ 8 6 100Ohm 20 6 100Ohm 20 6 term 7 6 term 7 7 Z0- 19 7 Z0- 19 7 Z0+ 6 7 Z0+ 6 8 Z1- 18 8 Z1- 18 8 Z1+ 5 8 Z1+ 5 9 Z2- 17 9 Z2- 17 9 Z2+ 4 9 Z2+ 4 10 Zelk- 16 10 Zelk- 16 10 Zelk+ 3 10 Zelk+ 3 11 Z3- 15 11 Z3- 15 11 Z3+ 2 11 Z3+ 2 shld Ishld 14 shld Ishld 14 shld Ishld 1 shld Ishld 1 Notes: 1. All pairs are individually shielded with aluminum foil. 2. Pair shields are wrapped Aluminum out and in contact with six internal drains (logic ground). 3. Outer braid and foil (chassis ground) is isolated from inner drains (logic ground). TS-2106-03 Sheet 3 of 3 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. © 3M 2006