232-1271-00-1102JH

OEM LCC Sockets 32, 68 & 84 Leads • Accepts JEDEC leadless ceramic chip carriers • Variety of lid options available only for 68 position • "U" lid for I.C.E. adaptor I/O cable exit • Heat Sink available for 68 position • Polarizing post on bottom of socket • No tools required for package insertion/removal • Full contact probe-ability • High temperature PPS plastic and BeCu contacts for rugged performance Date Issued: February 22, 2001 TS-0359-06 Sheet 1 of 5 7. Physical Insulation Material: Flammability: Color: Contact Material: Plating: Lid Material: Marking: Glass Filled Polyphenylene Sulfide ( PPS ) UL 94V-0 Black Beryllium Copper 50 m" [ 1.27 mm ] Nickel with Gold Flash in wiping area and solder tails Aluminum Raised Letters: 3M Logo & Part Identification Electrical Current Rating: 1 A Insulation Resistance: > 1 ¥ 1012 W at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating Operating: - 55°∞C to +105°∞C UL File No.: E68080 3M Electronic Handling and Protection 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-328-0411 or visit our website: http://www.3M.com/ehpd OEM LCC Sockets 32, 68 & 84 Leads 18.2 3.2 TEXTOOL/3M 1 20.7 FRONT 0.38 X 0.51 Contact Tails Pin #1 SLIDE OPEN 32x Ø 0.8 +0.1 -0 CLOSED 10.9 4 2 32 30 5 6 3 1 31 29 7 8 28 27 9 10 26 25 11 12 24 23 13 15 17 19 22 21 14 16 18 20 15.24 FRONT 0.50 Standoffs 2.54 Contact Tail Length 2.54 Typ. ±0.08 12.7 Typ 5 spcs @ 2.54 ± 0.08 (Tol Non-Accum) DIMENSIONS IN MILLIMETERS Notes: 1 Clearance required to allow for slide lid. DIM .0 TOL 0.25 .00 0.13 Ordering Information Lead Count Part Number Description 32 232-1271-00-1102JH Solid Lid *Device Thickness does not include cover. Length Device Thickness Width Thickness* TS-0359-06 Sheet 2 of 5 3M Electronic Handling and Protection Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-328-0411 or visit our website: http://www.3M.com/ehpd OEM LCC Sockets 32, 68 & 84 Leads 268-5401-00-1102JH 8.7 0.51 ± 0.05 1 30.7 0.38±0.051 max.3.0 1 30.7 max.3.0 30.7 30.7 (17.2) Front Front Test Probe Point (12.2) Test Probe Point 0.51 ± 0.05 1 0.38±0.051 268-5401-52-1102JH 30.7 2.54 Contact Tail Length 0.51 ± 0.05 2.54 Contact Tail Length Clearance required to remove slide lid Front Test Probe Point 268-5401-51-1102JH 1 268-5401-J 30.7 TEXTOOL/3M 30.7 Front Test Probe Point 2.54 Contact Tail Length max.3.0 TEXTOOL/3M 1 30.7 TEXTOOL/3M max.3.0 8.7 1 268-5401-50-1102JH 2.54 Contact Tail Length 0.38±0.051 Clearance required to remove slide lid Thermal Resistance - J-A (•C WATT) 50 0.51 ± 0.05 0.38±0.051 25.4±0.1 Typ. Pin No. 1 2.54±0.08 Typ. 45 40 35 30 268-5401-00 25 20 Front 268-5401-51 Ø 0.8 +0.1 –0 15 10 5 Clearent Hole for Orientation Pin Ø 1.6 0 0.5 1.0 1.5 2.0 +0.1 –0 2.5 3.0 Air Flow (m/sec.) DIMENSIONS IN MILLIMETERS DIM .0 TOL 0.25 .00 0.13 Ordering Information Lead Count Part Number Applicable Device Body Size Thickness Description 68 268-5401-00-1102JH Chip Carrier-LCC with Full Lid 24.13 ± 0.25 1.52 ± 0.15 68 268-5401-00-0000 Lid - Full 24.13 ± 0.25 1.52 ± 0.15 68 268-5401-11-1102JH End Use-LCC Type "A" Base Sub-assembly 24.13 ± 0.25 1.52 ± 0.15 68 268-5401-50-0000 Lid-U Shape 24.13 ± 0.25 1.52 ± 0.15 68 268-5401-50-1102JH Chip Carrier-LCC with U-Shape Lid 24.13 ± 0.25 1.52 ± 0.15 68 268-5401-51-0000 Lid –11 mm Heat Sink 24.13 ± 0.25 1.52 ± 0.15 68 268-5401-51-1102JH Chip Carrier-LCC with 11 mm Heat Sink 24.13 ± 0.25 1.52 ± 0.15 68 268-5401-52-0000 Lid – 6 mm Heat Sink 24.13 ± 0.25 1.52 ± 0.15 68 268-5401-52-1102JH Chip Carrier-LCC with 6 mm Heat Sink 24.13 ± 0.25 1.52 ± 0.15 TS-0359-06 Sheet 3 of 5 3M Electronic Handling and Proteciton Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-328-0411 or visit our website: http://www.3M.com/ehpd OEM LCC Sockets 32, 68 & 84 Leads 284-1273-00 1 3.2 35.8 Index Corner Side TEXTOOL/3M 35.8 Slide Open Closed Ø 1.52 Test Probe Point 30.48 ± 0.1 Typ. Clear for Orientation Post 2.54 ± 0.08 Typ. 11.1 34 13 31 11 0.38 x 0.51 2.54 ContactTail Length 1 14 12 32 33 Pin #1 3 4 2 284-1273-05 3.2 84x Ø 0.8 35.8 53 55 76 54 74 +0.1 -0 75 P. C. Board Pattern TEXTOOL/3M 35.8 Slide Open Closed Test Probe Point DIMENSIONS IN MILLIMETERS 9.2 Notes: 2.54 ContactTail Length 0.38 x 0.51 DIM .0 TOL 0.25 .00 0.13 1 Clearance required to remove slide lid. Ordering Information Lead Count 84 284-1273-00-1102JH Applicable Device Body Size Thickness* 29.21 ± 0.38 Sq 3.40 ± 0.05 84 284-1273-05-1102JH 29.21 ± 0.28 Sq Part Number * Device thickness does not include cover. 1.52 ± 0.05 TS-0359-06 4 of 5 Sheet 3M Electronic Handling and Protection Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-328-0411 or visit our website: http://www.3M.com/ehpd OEM LCC Sockets 32, 68 & 84 Leads Assembly Instructions: 1 2 3 4 5 Remove Lid from the socket body. Insert package into socket with chamfered corners meeting. Replace lid by inserting into back slot of socket body. While pressing lid down slid forward until fully inserted into front slot of socket body. To extract package, slide back and remove lid. 1 2 Chamfered Corner Type A Ceramic Leadless Package Note: Type “C” packages require visual orientation due to all corners being chamfered. 3 Into back slot Lid Back 4 front slot TS-0359-06 Sheet 5 of 5 3M Electronic Handling and Protection Division 6801 River Place Blvd. For technical, sales or ordering information call 800-328-0411 or visit our website: http://www.3M.com/ehpd