2525-36MMX55M

Page 1 of 3 3M™ Performance Flatback Tape 2525 Last Revision Date: June, 2015 Product Description 3M™ Performance Flatback Tape 2525 is used in holding, splicing or masking applications where high adhesion strength, high temperature capability and high backing strength are required. Product Features • Has excellent adhesion and backing strength levels and is resistant to moist conditions. • Colored backing provides high visibility and is easily picked up by sensing equipment. • Capable of withstanding 300°F (149°C) bake cycle for 1 hour. • Not recommended for outdoor applications or prolonged periods of sunlight exposure as tape may become very difficult to remove. Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Typical Physical Properties Property Values Additional Information Backing Flat stock paper Adhesive Type Rubber Color Orange Total Tape Thickness 9.5 mil (0.241 mm) View 0.241 mm View Test Method: ASTM D3652 Total Tape Thickness Test Method: ASTM D3652 Typical Performance Characteristics Property Values Tensile Strength 85.8 N/cm (49 lb/in) Additional Information Page 2 of 3 View Test Method: ASTM D3759 180° Peel Adhesion 7.5 N/cm (69 oz/in) View 69 oz/in View 49 lb/in View 2% View Test Method: ASTM D3330 Notes: 12 in/min (300 mm/min) 180° Peel Adhesion Test Method: ASTM D3330 Notes: 12 in/min (300 mm/min) Tensile Strength Test Method: ASTM D3759 Elongation at Break Test Method: ASTM D3759 Long Term Temperature Resistance 149 °C (300 °F) Long Term Temperature Resistance 300 °F Available Sizes Property Values Standard Roll Length 55 m (60 yd) Additional Information View Notes: Available in metric widths (eg, 24 mm corresponds to 1 inch). Standard Roll Length 60 yd Notes: Available in metric widths (eg, 24 mm corresponds to 1 inch). Storage and Shelf Life Store under normal conditions of 70°F (21°C) and 50% R.H. in the original carton. To obtain best performance, use this product within 18 months from date of manufacture. Bottom Matter 3M Industrial Business Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 View Page 3 of 3 800-362-3550 • 877-369-2923 (Fax) www.3M.com Trademarks 3M is a trademark of 3M Company. Handling/Application Information Application Examples Can be used in many holding, masking, and splicing applications where a high visibility tape is desired. It can also be used for various types of edging and binding applications. References Property Values 3m.com Product Page https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Performance-Flatback-Tape-2525/? N=5002385+3293242218&rt=rud Safety Data Sheet SDS https://www.3m.com/3M/en_US/company-us/SDS-search/results/? gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=2525 ISO Statement This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Information Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations, and the user must take any action required under any recall, field action or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.