2841-9047-90-2401

3M™ Textool™ Test & Burn-In Ball Grid Array Sockets 0.80 mm pitch, Types I, II, III and IV 9000 Series • Double-beam normally-closed contact delivers • • • • • • balanced, opposing forces to solder ball with minimal shear stress Contact tips touch ball above its center plane moving ball deformation away from seating plane Designed to allow excellent air flow around device Includes a retractable locating guide for easy board mounting even with hundreds of leads Compatible with most robotic handlers Helps provide easy manual operation See Regulatory Information Index (RIA) for chemical compliance information TS-9000-05 Sheet 1 of 3 Date Modified: March 9, 2007 Physical Body Material: Body Flammability: Body Color: Alignment Plate Material: Alignment Plate Flammability: Alignment Plate Color: Contact Material: Contact Plating: Other Metal Parts: Marking: Polyethersulfone (PES) UL 94V-0 Black Liquid Crystal Polymer (LCP) UL 94V-0 Black Beryllium Copper 30µ" [ 0.76 µm ] Gold over 50µ" [ 1.27 µm ] Nickel Stainless Steel 3M Logo/Textool Electrical Current Rating: 0.5 A max at 25°C Initial Contact Resistance: 700 MΩ at 500 VDC Withstanding Voltage: 500 VRMS at sea level Environmental Operating Temperature Rating: -55°C to +150°C Mechanical Durability: 20,000 actuations (10,000 devices load/unload) at room temperature Initial Contact Force: 12 gf [ 0.12N ] normal for 0.4 mm diameter solder ball 15 gf [ 0.15N ] normal for 0.5 mm diameter solder ball Type I-3 Kg max at full pin count Initial Actuation Force: Type II-5 Kg max at full pin count Type III-7 Kg max at full pin count Type IV-11 Kg max at full pin count Contact Wiper Gap - Fully Open: 0.65 mm normal Textool is a trademark of 3M company. 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Textool™ Test & Burn-In Ball Grid Array Sockets 0.80 mm pitch, Types I, II, III and IV 9000 Series Type I, II and III Dim. F ± 0.10 Dim. A Dim. G ± 0.10 Dim. B Dim. K ± 0.10 Dim. C 0.80 ± 0.05 Pitch Typ. 2XXX-90XX Dim. I ± 0.10 CL of Matrix Dim. D Dim. J ± 0.10 CL of Matrix Dim. H ± 0.10 Dim. E Ø0.30 Min. Contact Hole / TEXTOOL Optional Package Retainers 2XØ2.20 Min. For Optional Mounting Screws CL of Matrix 0.80 ± 0.05 Pitch Typ. CL of Matrix 2XØ2.00 Guide Hole for Automatic Loader/ Unloader 4XØ1.60 Min. For Optional PCB Locating Posts PCB Hole Pattern Package Outline 9.70 Seating Plane 2.50 Contact Tail 17.30 0.55 Standoffs Optional PCB Locating Posts 1.50 Dia. 1.50 0.15 x 0.22 Contact Tails 0.80 Pitch Dime nsion Type I Type II Type III Dim. A 33.00 40.00 45.00 Dim. B 27.00 32.00 37.00 Dim. C 17.00 21.00 26.00 Dim. D 33.00 40.00 45.00 Dim. E 17.00 21.00 26.00 Dim. F 26.00 33.00 38.00 Dim. G 15.00 20.00 25.00 Dim. H 26.00 33.00 38.00 Dim. I 15.00 20.00 25.00 Dim. J 9.60 14.40 19.20 Dim. K 9.60 14.40 19.20 Note: For package specifications and P.C.B. recommendations, see table on sheet 3. 3 Interconnect Solutions http://www.3M.com/interconnects/ TS-9000-05 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Textool™ Test & Burn-In Ball Grid Array Sockets 0.80 mm pitch, Types I, II, III and IV 9000 Series Type IV 43.00 ± 0.10 48.00 32.00 ± 0.10 2XØ2.10 For Base Locating Post 33.01 24.00 ± 0.10 0.80 ± 0.05 Pitch Typ. 2XXX-904X-XX-XX01 43.00 ± 0.10 48.00 CL of Matrix 33.00 24.00 ± 0.10 CL of Matrix 32.00 ± 0.10 / TEXTOOL Optional Package Retainers 2XØ2.10 For Screw CL of Matrix Ø0.30 Min. Contact Hole Package Outline 9.70 Seating Plane 19.01 CL of Matrix 2XØ1.60 For Alignment Plate Locating Post 0.80 ± 0.05 Pitch Typ. PCB Hole Pattern 2.50 Contact Tail 0.55 Standoffs 1.50 Dia. 1.50 0.15 x 0.22 Contact Tails Optional PCB Locating Posts 0.80 Pitch Package Specifications Type Max. Package Siz e Max. Matrix P.C.B. Re commendations Through Ball Board Hole Diamete r Thickness Diame ter I 12.0 ± 0.1 SQ Max. 13 x 13 Max. 0.35 - 0.55 0.8 - 1.6 0.30 Min. II 17.0 ± 0.1 SQ Max. 19 x 19 Max. 0.35 - 0.55 0.8 - 1.6 0.30 Min. III 21.0 ± 0.1 SQ Max. 25 x 25 Max. 0.35 - 0.55 0.8 - 1.6 0.30 Min. IV 27.0 ± 0.1 SQ Max. 31 x 31 Max. 0.35 - 0.55 0.8 - 1.6 0.30 Min. Ordering Information 2 XXX - 90 X X - XX - X X X 1 (RIA E1 & C1 apply) Pin Count Product Series Product Platforms: Matrix Pattern Variation: 1 = Type I (Assigned by 3M) 2 = Type II 3 = Type III Product Variation: 4 = Type IV (Assigned by 3M) Solder Tail Length: 0 = 2.50 [0.10] (Standard) 1 = 1.00 [0.04] Retainer: 4 = Without (Standard) 5 = With Board Locating Post: 0 = Without 1 = With (Both alignment plate & base) 2 = With (Alignment plate only) 3 = With (Base only) 3 Interconnect Solutions http://www.3M.com/interconnects/ Material Type: 1 = PES/BeCu/Au TS-9000-05 Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-B CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS 20 Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-B © 3M 2007