3
Closures
SLiC™ Aerial Closures and Terminals
118-122
GATM Series Closures
123-125
GATM Series Closure Accessories
126-127
Dome Closures
128-130
Foam-Sealed Closures
131-132
Better Buried Closures
133-137
Scotchcast™ Closures 89 Series
138-141
2-Type PEAK
(Pressure Encapsulated Apparatus Kit)
142-143
2-Type Pressurized Closures
144-153
4-Type Fire Retardant Closures
154-162
Accessories and Replacement Parts
163-167
Tools
168
Z Watertight Closure System
169-170
Pressurized Closures 50/51P Series
171
Tools, Accessories and Replacement Parts
172
K&B Vault and Riser Closures
173-184
Network Accessories
185-188
Specialty Tapes
189-193
Lettering Kits and Replenishment Decals
194-197
Miscellaneous Accessories
198-199
Shield Bonding Products
200-201
Sheath Repair Products
202
Adhesive and Magnetic Mounting Plates
203
Holding and Fastening Products
204-206
www.3MTelecommunications.com
123
3M™ SLiC™ Aerial Closures and Terminals
Closure Selection Guide
To order SLiC Aerial Closures and Terminals, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
Floating Bond, Rigid Bond,
Spiral End Seal
193
Fewer parts and easier installation with
the SLiC Aerial Closure.
•
•
•
•
•
•
Superior seal
Easily adaptable
Single piece design
Double wall molded construction
Made from durable, rugged materials
Easy to access and reenter
The SLiC aerial closure is a singlepiece aerial closure, easily installed in
construction or maintenance situations.
The one-piece construction permits
complete splice access after placement
without removal of the closure or
bonding from the cables. The closures
are free breathing and suitable for
straight, butt, and branch splices of
non-pressurized communication cables.
Splices are protected by the
closure’s double-wall molded
polyethylene construction. The durable
SLiC closure will not crack or break
in even the harshest environment.
194
All components are attached to the
closure; there are no parts to lose.
Because of its interlocking ends,
the SLiC aerial closure can expand to
meet any size sheath opening without
special kits, eliminating excess
inventory. The 2 x 29, 3 x 33, 5 x 33,
and 7 x 33 closures can be extended
while maintaining their initial strength.
The SLiC aerial closure does not
require taping, bricking or any special
labor-intensive practices. The end seals
assure a snug fit on cables and eliminate
the need for a drip collar. Sealing
collars or tape are not required when
using the SLiC closure.
The two-, three-, five-, seven-, and
nine-inch diameter closures feature a
universal end seal to handle any plant
configuration. There are six sizes
available, accommodating splice
openings from 254 to 635 mm
(10 to 25 inches).
RUS Listed
SLiC Aerial Closure
124
Sheath Scuff
pg. 199
3M™ Scotchlok™ Connectors
pg. 2
Double walled, molded construction
Resists breaking or cracking
Shield Bonding
pg. 200
Interlocking ends
Extendible for long sheath openings
Tapes and Sealing
pg. 189
Hanger/bonding system
No external or additional bonding material
required
Quick release latch
Easy reentry
Attached sheath retention (SR) bracket
(only for rigid bond)
Protects cable sheath pull-out or movement
Spiral end seal
One size fits multiple cable configurations
Cable Lubricants
pg. 322
3M™ MS2™ Modules
pg. 6
Cable Ties
pg. 204
One piece construction
Provides easy installation; no loose parts
3M™ SLiC™ Aerial Closures with Floating Bond
Product
Number
Contains
Packaging
kg (lbs.)/cs.
Min. Order
UPC
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
054007-92600
054007-92601
051138-75544
054007-92602
054007-92603
054007-92604
054007-92605
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
054007-71241
054007-68300
051138-75546
054007-68299
054007-68298
054007-68297
054007-57088
SLiC Aerial Closure Kit with Spiral End Seal
SLiC 2" x 19"-SES
SLiC 2" x 29"-SES
SLiC 3” x 19”-SES
SLiC 3" x 33"-SES
SLiC 5" x 33"-SES
SLiC 7" x 33"-SES
SLiC 9" x 36"-SES
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
1/cs., 1.0 (2.3)
1/cs., 1.7 (3.7)
1/cs., 2.0 (4.4)
1/cs., 2.4 (5.3)
1/cs., 3.8 (8.3)
1/cs., 5.0 (11.1)
1/cs., 7.5 (16.5)
SLiC Aerial Closure Kit with Rubber End Seal
SLiC 2" x 19"
SLiC 2" x 29"
SLiC 3” x 19”
SLiC 3" x 33"
SLiC 5" x 33"
SLiC 7" x 33"
SLiC 9" x 36"
2 Double Port
2 Double Port
2 Triple Port
2 Triple Port
2 Triple Port
2 Triple Port
2 Triple Port
1/cs., 1.1 (2.4)
1/cs., 1.7 (3.7)
1/cs., 2.1 (4.6)
1/cs., 2.4 (5.6)
1/cs., 3.6 (8.0)
1/cs., 4.8 (10.6)
1/cs., 7.3 (16.0)
195
3M SLiC Aerial Closures with Rigid Bond/Sheath Retention
Product
Number
Contains
Packaging Min. Order
kg (lbs.)/cs.
UPC
Aerial Closure Kit with Spiral End Seal
SLiC 2" x 19"-SR/SES
SLiC 2" x 29"-SR/SES
SLiC 3" x 33"-SR/SES
SLiC 5" x 33"-SR/SES
SLiC 7" x 33"-SR/SES
SLiC 9" x 36"-SR/SES
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
1/cs., 1.1 (2.5)
1/cs., 1.7 (3.7)
1/cs., 2.6 (5.8)
1/cs., 3.9 (8.6)
1/cs., 5.1 (11.2)
1/cs., 7.4 (16.3)
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
054007-92612
054007-92613
054007-92614
054007-92615
054007-92616
054007-92617
3M SLiC Aerial Closures with
Bond Assembly attached (4462-SN)
Product
Number
Contains
196
Packaging Min. Order
kg (lbs.)/cs.
UPC
Aerial Closure Kit with Spiral End Seal
SLiC 2" x 19"-BA/SES
SLiC 2" x 29"-BA/SES
SLiC 3” x 19”-BA/SES
SLiC 3" x 33"-BA/SES
SLiC 5" x 33"-BA/SES
SLiC 7" x 33"-BA/SES
SLiC 9" x 36"-BA/SES
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
1/cs., 4.3 (9.4)
1/cs., 6.5 (14.4)
1/cs., 7.2 (15.7)
1/cs., 9.1 (20.0)
1/cs., 3.9 (8.6)
1/cs., 5.0 (11)
1/cs., 7.6 (16.8)
4 kits
4 kits
4 kits
4 kits
1 kit
1 kit
1 kit
054007-92606
054007-92607
051138-75545
054007-92608
054007-92609
054007-92610
054007-92611
Aerial Closure Kit with Rubber End Seal
SLiC 2" x 19" BA
SLiC 2" x 29" BA
SLiC 3" x 19" BA
SLiC 3" x 33" BA
SLiC 5" x 33" BA
SLiC 7" x 33" BA
SLiC 9" x 36" BA
2 Double Port
2 Double Port
2 Double Port
2 Double Port
2 Double Port
2 Double Port
2 Double Port
197
1/cs., 4.3 (9.5)
1/cs., 6.6 (14.5)
1/cs., 7.5 (16.3)
1/cs., 9.1 (20.0)
1/cs., 3.8 (8.3)
1/cs., 4.8 (10.5)
1/cs., 7.4 (16.4)
4 kits
4 kits
4 kits
4 kits
1 kit
1 kit
1 kit
054007-71483
054007-71484
051138-75577
054007-71485
054007-71348
054007-71349
054007-57089
125
3M™ SLiC™ Aerial Closures with
Bond Assembly included (4460-S)
Product
Number
Contains
Packaging Min.
kg (lbs.)/cs. Order
UPC
Aerial Closure Kit with Spiral End Seal
SLiC 2" x 19" 4460S/SES
SLiC 2" x 29" 4460S/SES
SLiC 3" x 33" 4460S/SES
SLiC 5" x 33" 4460S/SES
SLiC 7" x 33" 4460S/SES
SLiC 9 " x 36" 4460S/SES
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
Spiral End Seal
1/cs., 1.1 (2.4)
1/cs., 1.7 (3.8)
1/cs., 2.4 (5.2)
1/cs., 3.7 (8.1)
1/cs., 5.0 (11.1)
1/cs., 7.2 (15.9)
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
054007-92618
054007-92619
054007-92620
054007-92621
054007-92622
054007-92623
198
Aerial Closure Kit with Rubber End Seal
SLiC 2" x 19" 4460S
SLiC 2" x 29" 4460S
SLiC 3" x 33" 4460S
SLiC 5" x 33" 4460S
SLiC 7" x 33" 4460S
SLiC 9" x 36" 4460S
Double Port/Double Port 1/cs., 1.1 (2.5)
Double Port/Double Port 1/cs., 1.8 (3.9)
Double Port/Triple Port 1/cs., 2.4 (5.2)
Double Port/Triple Port 1/cs., 3.5 (7.8)
Double Port/Triple Port 1/cs., 4.8 (10.6)
Double Port/Triple Port 1/cs., 7.0 (15.4)
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
054007-71564
054007-71565
054007-71566
054007-71567
054007-71568
054007-57091
3M SLiC Aerial Closure Capabilities
SLiC
2 x 19
mm (in.)
SLiC
2 x 29
mm (in.)
SLiC
3 x 19
mm (in.)
SLiC
3 x 33
mm (in.)
SLiC
5 x 33
mm (in.)
SLiC
7 x 33
mm (in.)
SLiC
9 x 36
mm (in.)
Max. Splice Opening
356 (14)
432 (17)
356 (14)
533 (21)
533 (21)
533 (21)
635 (25)
Max. Bundle Diameter
55.9 (2.2)
66 (2.6)
91.4 (3.6)
91.4 (3.6)
142.2 (5.6)
193.0 (7.6)
244 (9.6)
200-pair
*400-pair
(26 or 24 AWG)
0.4 or 0.5
*1200-pair
(26 AWG)
0.4
*2400-pair
(26 AWG)
0.4
*3600-pair
(26 AWG)
0.4
30-76
(1.2-3.0)
20-36
(0.8-1.4)
36-51
(1.4-2.0)
13-30
(0.5-1.2)
NA
38-97
(1.5-3.8)
30-46
(1.2-1.8)
13-30
(0.5-1.2)
46-61
(1.8-2.4)
13-30
(0.5-1.2)
38-97
(1.5-3.8)
30-46
(1.2-1.8)
13-30
(0.5-1.2)
46-61
(1.8-2.4)
13-30
(0.5-1.2)
Approx. Cable
Range Pair Count
100-pair
**200-pair
(26 or 24 AWG) (26 or 24 AWG)
0.4 or 0.5
0.4 or 0.5
Spiral End Seal Port Capacity
End Seal Dia.
Port #1
End Seal Dia.
Port #2
End Seal Dia.
Port #3
End Seal Dia.
Port #4
20-41
(0.8-1.6)
13-25
(0.5-1.0)
13-25
(0.5-1.0)
NA
End Seal Dia.
Port #5
NA
NA
NA
NA
5-41
(0.2-1.6)
5-41
(0.2-1.6)
5-66
(0.2-2.6)
5-66
(0.2-2.6)
NA
NA
NA
5-25
(0.2-1.0)
5-15
(0.2-0.6)
5-25
(0.2-1.0)
5-15
(0.2-0.6)
5-51
(0.2-2.0)
5-15
(0.2-0.6)
5-51
(0.2-2.0)
5-15
(0.2-0.6)
20-56
(0.8-2.2)
5-56
(0.2-2.2)
41-81
(1.6-3.2)
5-81
(0.2-3.2)
41-81
(1.6-3.2)
5-81
(0.2-3.2)
3 Port End Seal Dia. Port #1
NA
NA
3 Port End Seal Dia. Port #2
NA
NA
3 Port End Seal Dia. Port #3
NA
NA
5-41
(0.2-1.6)
5-25
(0.2-1.0)
5-25
(0.2-1.0)
5-41
(0.2-1.6)
5-25
(0.2-1.0)
5-25
(0.2-1.0)
15-56
(0.6-2.2)
5-36
(0.2-1.4)
5-36
(0.2-1.4)
36-97
(1.4-3.8)
15-46
(0.6-1.8)
15-46
(0.6-1.8)
36-97
(1.4-3.8)
15-46
(0.6-1.8)
15-46
(0.6-1.8)
Rubber End Seal Port Capacity
1 Port End Seal Dia. Port #1
2 Port End Seal Dia. Port #1
2 Port End Seal Dia. Port #2
20-41
(0.8-1.6)
13-25
(0.5-1.0)
13-25
(0.5-1.0)
NA
20-66
(0.8-2.6)
13-25
(0.5-1.0)
13-25
(0.5-1.0)
NA
20-66
(0.8-2.6)
13-25
(0.5-1.0)
13-25
(0.5-1.0)
NA
* Based on 2-Bank Straight Splice using MS2™ 4000-DWP Module
** Based on more than one cable
126
3M™ SLiC™ Aerial Terminal
and SLiC Aerial Terminal
with Spiral End Seal
199
The 3M SLiC Aerial Terminal and the
SLiC Aerial Terminal with Spiral End
Seal are distribution terminals and
closures contained within a
lightweight, double-wall moldedplastic housing designed for fixedcount termination of aerial drop wires.
Special block configurations required
by the individual customer are also
available and may be completed either
at the factory or by the customer.
End seals of the SLiC Terminal are
designed to assure proper sizing and a
snug fit around the cable sheath. This
eliminates the need for drip collars to
prohibit water from entering the splice
chamber. The SLiC Terminal with
Rubber End Seal comes packaged with
single-port end seals; however,
customers may use double-port or
triple-port end seals as their
applications require. The 7.6 cm SLiC
Terminal with spiral end seal comes
packaged with three port end seals.
And, the 12.7 cm terminal comes
packaged with four port end seals.
RUS Listed
SLiC Aerial Terminals
Two-closure-in-one housing design
Separates splice and drop chamber
One piece construction
Eases installation
Shield Bonding
pg. 200
Sheath Scuff
pg. 199
pg. 189
Self-healing drop wire ports
Minimizes weather and insect problems
Tapes and Sealing
Sleeves extend in either or both directions
Eliminates need for separate rehabilitation
and distribution splices; accommodates long
sheath openings
3M™ Scotchlok™ Connectors
pg. 2
3M™ MS2™ Modules
pg. 6
Accommodates a variety of terminating blocks
Adaptable to user requirements
Multiple distribution counts
Counts range in multiples of 5, from 5 to 25
Spiral end seal
One size fits multiple cable configurations
Ordering Information for Empty SLiC Aerial Terminals
Product
Number
Block
Type
Initial Pair
Capacity
Packaging
kg (lbs.)/cs.
Minimum
Order
UPC
051138-
Empty Terminals with Spiral End Seals
328-MTPI/SES
ATS/IDC
5 - 25
11.7 (26.0)
4
58545
530-MTPI/SES
ATS/IDC
5 - 25
4.1 (9.1)
1
58776
Empty Housings Available with Rubber End Seals Upon Request
328 & 530 MT Housing will accommodate other manufacturer's blocks
* Blocks must be purchased from manufacturer or through your distributor.
Ordering Information for Filled SLiC Aerial Terminals
Product
Number
Block
Type
Initial Pair
Capacity
Packaging
kg (lbs.)/cs.
Minimum
Order
UPC
051138-
Filled Terminals with Spiral End Seals
328-PI-5/SES
ATS/IDC
5, 10, 15, 25
12.0 (26.4)
4
75416
328-PI-10/SES
ATS/IDC
5, 10, 15, 25
12.0 (26.4)
4
58546
328-PI-20/SES
ATS/IDC
5, 10, 15, 25
12.0 (26.4)
4
58547
328-PI-25/SES
ATS/IDC
5, 10, 15, 25
13.8 (30.6)
4
58548
530-PI-5/SES
ATS/IDC
5, 10, 15, 25
5.0 (11.0)
1
75417
530-PI-10/SES
ATS/IDC
5, 10, 15, 25
5.0 (11.0)
1
58777
530-PI-20/SES
ATS/IDC
5, 10, 15, 25
5.0 (11.0)
1
58778
530-PI-25/SES
ATS/IDC
5, 10, 15, 25
5.1 (11.22)
1
58779
NOTE: 3" SLiC terminals have an approximate splice bundle capacity of 78.7 mm (3.1"). Based on 24 AWG (.5 mm) 2 bank straight splices
using MS2 4000DWP modules; splice capacity is approximately 300 pair. 5" SLiC terminals have an approximate splice bundle capacity of
129.5 mm (5.1"). Based on 26 AWG (.4 mm) 2 bank straight splices using MS2 4000DWP modules; splice capacity is approximately 900 pair.
127
3M™ SLiC™ Aerial Closure and Terminal Accessories
#
Product Description
Pkg.
Min. Order
UPC
1 set/bag,
10 sets/case
[529936]
054007-34416
1/cs., 2.4 (5.3)
1 set/bag,
10 sets/case
054007-92926
2" Single Port Rubber End Seal
10/cs., 0.6 (1.4)
10 each
054007-57092
2" Double Port Rubber End Seal
10/cs., 0.5 (1.2)
10 each
054007-71218
3" Single Port Rubber End Seal
10/cs., 1.0 (2.2)
10 each
054007-57093
3" Double Port Rubber End Seal
10/cs., 1.0 (2.1)
10 each
054007-57094
3" Triple Port Rubber End Seal
10/cs., 1.0 (2.2)
10 each
054007-71221
5" Single Port Rubber End Seal
5/cs., 2.51 (5.5)
5 each
054007-91694
5" Double Port Rubber End Seal
5/cs., 2.46 (5.4)
5 each
054007-71458
kg (lbs.)/cs.
1.
AC-HB1 Offset Hanger Brackets
1/cs., 2.4 (5.3)
2.
3.
4.
5" Triple Port Rubber End Seal
5/cs., 1.3 (2.8)
5 each
054007-71220
7" Double Port Rubber End Seal*
5/cs., 2.4 (5.2)
5 each
054007-71457
7" Triple Port Rubber End Seal*
2.
201
3.
202
5/cs., 2.3 (5.0)
5 each
054007-71219
10/cs., 0.5 (1.2)
10/cs., 1.2 (2.7)
5/cs., 2.1 (4.7)
5/cs., 3.5 (7.8)
10 each
10 each
5 each
5 each
054007-92648
054007-92649
054007-92650
054007-92651
4.
203
SR-3 adds sheath retention to 3" SLiC Terminals
and Closures
10/cs.
10 kits per case
1 kit per bag
051138-57641
SR-5 adds sheath retention to 5" SLiC Terminals
and Closures
10/cs.
10 kits per case
1 kit per bag
051138-57642
5.
204
SLiC Spiral End Seal Kits
Sheath Retention Kits
* Also fits in a 9" closure.
3900-A Aerial Service Wire
Closure Kit
205
128
200
SLiC Rubber End Seal Kits
2" Triple Port Spiral End Seal
3" Triple Port Spiral End Seal
5" Four Port Spiral End Seal
7" Five Port Spiral End Seal*
5.
1.
AC-HB2 Extended Hanger Brackets
Features
• Butt splicing 2-pair aerial drop wire
• Pole and wall mount applications
• Wire gauges ranging from 18 to 24
AWG
• Utilizes available connectors
(i.e. Scotchlok™ UY2 and UR2
Connectors)
• Provides primary physical
protection
• Free breathing
• Resistant to UV rays
3M™ GATM Series Closures
Closure Selection Guide
To order GATM Series Closures, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
2000 Aerial Terminal with
Contour Drop Box
A free breathing terminal closure
in combination with a separate
distribution chamber (with block
installed) that may be used with
lashed or figure-8 cable in nonpressurized aerial application to
quickly and easily terminate up
to 25 pairs.
The contour drop box will
accommodate 10, 20 and 25 pair
raised post nonprotected terminal
blocks. In addition, various pair count
IDC terminal blocks may be used with
the contour drop box.
2000 Aerial Terminal with
10 or 25 Pair Protected
Drop Box
206
The drop box is for protected terminal
blocks which are available with or
without arrestors.
5000 and 7000
Aerial Terminal with
Contour Drop Box
The contour drop box will
accommodate 10, 20 and 25 pair
raised post nonprotected terminal
block. In addition, various pair count
IDC terminal blocks may be used
with the Contour drop box.
5000 and 7000 Aerial
Terminal with 10 or 25 Pair
Protected Drop Box
The drop box is for protected terminal
blocks which are available with or
without arrestors.
GATM Series Closures and Terminals
All metal parts are of non-corrosive materials
Durable, long-lasting construction
No special tools, tapes glues or sealants
required for assembly
Provides easy installation
Floating bond system is “built in” to closure
For flexibility in terminations
“Free-breathing” terminal closure
Vents moisture while prohibiting dirt,
dust and insect entry
Re-enterable
Quick and easy terminations
Pre-cut end seals
Provides rapid sizing to fit a variety of
cable sizes
Closures may be extended to protect large
damaged sections of cable
Ensures product performance
Standard 10, 20, and 25 pair configurations
Easily fits a variety of applications
Protected and non-protected terminal blocks
are available – raise post only
Features that fit your application
129
Ordering Information for 3M™ Non-protected Terminals GATM Series 2000, 5000 and 7000
Product
Number
Sealing
Washer
Config.
Cable Sheath
Terminal
Diameter Range
Pair
mm (in.)
Count
Block
Type
Protection Approx. Min.
UPC
Type
Weight Order 051138kg (lbs.) (each)
1 in / 1 out
7.6 - 38.1 (0.30 - 1.50)
25
Raised Post
Non-protected
GATM95A101112
1 in / 1 out
10.2 - 63.5 (0.40 - 2.5)
10
Raised Post
Non-protected
4.1 (9)
1
77863
GATM95A251112
1 in / 1 out
10.2 - 63.5 (0.40 - 2.5)
25
Raised Post
Non-protected
4.6 (10)
1
77865
GATM97A101112
1 in / 1 out
15.2 - 101.6 (0.60 - 4.0)
10
Raised Post
Non-protected
7.7 (17)
1
77896
GATM97A251112
1 in / 1 out
15.2 - 101.6 (0.60 - 4.0)
25
Raised Post
Non-protected
7.7 (17)
1
77897
2000 Terminals
GATM92A251112
3.6 (8)
1
77837
5000 Terminals
7000 Terminals
Standard Package = Kit. Minimum Order/Ordering Multiple = 1 Kit.
Ordering Information for 3M™ Protected Terminals GATM Series 2000, 5000 and 7000 with
10- or 25-Pair Protected Drop Box
Product
Number
Sealing
Washer
Config.
Cable Sheath
Terminal
Diameter Range
Pair
mm (in.)
Count
Block
Type
Protection Approx.
Type
Weight
kg (lbs.)
Min.
UPC
Order 051138(each)
GATM92B101112
1 in / 1 out
7.6 - 38.1 (0.30 -1.50)
10
Raised Post
Gas
5.9 (13)
1
77838
GATM92B251112
1 in / 1 out
7.6 - 38.1 (0.30 -1.50)
25
Raised Post
Gas
6.4 (14)
1
78190
GATM95B101112
1 in / 1 out
10.2 - 63.5 (0.40 - 2.5)
10
Raised Post
Gas
6.4 (14)
1
77867
GATM95C101112
1 in / 1 out
10.2 - 63.5 (0.40 - 2.5)
20
Raised Post
Carbon
6.4 (14)
1
78708
GATM95B251112
1 in / 1 out
10.2 - 63.5 (0.40 - 2.5)
25
Raised Post
Gas
6.8 (15)
1
78707
1 in / 1 out
15.2 - 101.6 (0.60 - 4.0)
10
Raised Post
Gas
7.7 (17)
1
77898
2000 Terminals
5000 Terminals
7000 Terminals
GATM97B101112
Standard Package = Kit. Minimum Order/Ordering Multiple = 1 Kit.
3M™ Closures GATM Series
GATM “Super Stretch” Closure for aerial splice protection and sheath repairs.
130
207
Shield Bonding
pg. 200
Tapes and Sealing
pg. 189
710 Modules
pg. 22
3M™ MS2™ Modules
pg. 6
3M™ Scotchlok™ Connectors
pg. 2
Ordering Information for 3M™ Aerial Super Stretch Closures GATM
Product
Number
Inside
Diameter
mm (in.)
Max. Sheath
Opening
mm (in.)
178 (7)
635 (25)
GATM9S7441111
178 (7)
851 (33.5)
2700
1 in / 1 out
1
78329
GATM9S9362211
241 (9.5)
635 (25)
4200
2 in / 2 out
914 (36)
15.2 (33.5)
1
78332
GATM9S9442211
241 (9.5)
851 (33.5)
4800
2 in / 2 out
1130 (44.5)
17.9 (39.5)
1
78335
GATM9S7361111
Max. Number Number
Cable Pairs
of Cable
(24 gauge)
Openings
2100
1 in / 1 out
Overall
Length
mm (in.)
Approx.
Weight
kg (lbs.)
914 (36)
10.3 (22.80)
Min.
UPC
Order 051138(each)
1130 (44.5) 12.3 (27.10)
1
78326
Standard Package = Kit. Minimum Order/Ordering Multiple = 1 Kit.
Sealing Washer Selection Chart for 3M™ Aerial Super Stretch Closure GATM
Product
Number
Sealing
Washer
Entry Config.
Sealing
Washer Dia.
mm (in.)
Cable
Dia. Range
mm (in.)
Qty. in
Standard
Package
Min. Order/
Ordering
Multiple
Approx.
Weight
kg (lbs.)
UPC
051138-
GATM9S71E
Single entry
718 (7)
1 @ 18.3 - 101.6
(0.72 - 4.0)
1
1 pkg.
0.88 (1.95)
78323
GATM9S72E
Double entry
718 (7)
2 @ 14.0 - 63.5
(0.55 - 2.5)
1
1 pkg.
0.88 (1.95)
78324
GATM9S73E
Triple entry
718 (7)
3 @ 14.0 - 63.5
(0.55 - 2.5)
1
1 pkg.
0.88 (1.95)
78327
GATM9S92E
Double entry
241 (9.5)
2 @ 14.0 - 101.6
(0.55 - 4.0)
1
1 pkg.
1.92 (4.25)
78330
GATM9S93E
Triple entry
241 (9.5)
1 @ 14.0 - 88.9
(0.55 - 3.5)
2 @ 14.0 - 63.5
(0.55 - 2.5)
1
1 pkg.
1.92 (4.25)
78333
GATM9S94E
Quadruple entry
241 (9.5)
2 @ 14.0 - 88.9
(0.55 - 3.5)
2 @ 14.0 - 53.3
(0.55 - 2.1)
1
1 pkg.
1.92 (4.25)
78336
131
3M™ Closure Accessories GATM Series
Ordering Information for 3M™ Closure Accessories GATM Series
Product
Number
Description
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
Min.
Order
(each)
UPC
051138-
1
1 pkg.
0.9 (2)
1
77812
Drop Chamber Housing
Replacement housings for GATM aerial terminals.
GATM90100
10 - 25 pair contour housing
Closure Extender Kit
For connecting two closures together or covering sections of damaged cable.
GATM92960
For 2000 Series Closure
1
25 pkgs.
5.4 (12)
1
77831
GATM95960
For 5000 Series Closure
1
25 pkgs.
5.4 (12)
1
77860
GATM97960
For 7000 Series Closure
1
25 pkgs.
5.4 (12)
1
77894
Washer Housing Kit
Used in conjunction with splice closure extender kit to lengthen a closure.
GATM92961
For 2000 Series Closure
1
1 pkg.
0.23 (0.5)
1
77832
GATM95961
For 5000 Series Closure
1
1 pkg.
0.23 (0.5)
1
77861
GATM97961
For 7000 Series Closure
1
1 pkg.
0.23 (0.5)
1
77895
Ordering Information for 3M™ Closure Washers and End Sealing GATM Series
Product
Number
Description
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
2000 Washers
GATM92911
Single Entry Washer
1
50 pkgs.
4.6 (10)
77828
GATM92922
Double Entry Washer
1
50 pkgs.
5.4 (12)
77829
5000 Washers
GATM95911
Single Entry Washer
1
25 pkgs.
5.4 (12)
77855
GATM95922
Double Entry Washer
1
25 pkgs.
5.0 (11)
77856
GATM95933
Triple Entry Washer
1
25 pkgs.
4.6 (10)
77858
7000 Washers
GATM97911
Single Entry Washer
1
10 pkgs.
0.9 (2)
77890
GATM97922
Double Entry Washer
1
10 pkgs.
0.9 (2)
77891
GATM97933
Triple Entry Washer
1
10 pkgs.
0.9 (2)
77893
For sealing the ends of splice and terminal closures.
132
Ordering Information for 3M™ Raised Post Terminal Blocks GATM
Product
Number
Description
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
GATM96010
Non protected 10 pair block
1
1 pkg.
0.3 (0.7)
77877
0.9 (2)
77879
0.9 (2)
77878
2.3 (5)
77880
Replacement for terminal blocks found in: GATM92A10-11, GATM95A10-11, GATM97A10-11.
GATM96110
Gas protected 10 pair block
1
1 pkg.
Replacement for terminal blocks found in: GATM92B10-11, GATM95B10-11, GATM97B10-11.
GATM96025
Non protected 25 pair block
1
1 pkg.
Replacement for terminal blocks found in: GATM92A25-11, GATM95A25-11, GATM97A25-11.
GATM96125
Protected 25 pair block
1
1 pkg.
Replacement for terminal blocks found in: GATM92B25-11, GATM95B25-11, GATM97B25-11.
133
3M™ Dome Closures
Closure Selection Guide
To order Dome Closures, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
Re-enterable Dome Closures
with Pull ‘N’ Shrink Tubing
(PST) offer fast, rugged splice
protection with easy reentry.
An economical method of protecting
butt splices for pedestal, hand hole or
pole mount applications is provided by
the Re-enterable PST Dome Closures.
The closure provides protection from
the harmful effects of moisture,
insects, and ultraviolet light, while
providing no cost re-entry.
The dome closure is an easily reenterable closure that protects the
splice–without requiring special tools
or flame for installation.
The splice is enclosed in a split
polypropylene dome which is clamped
together with a steel latch and sealed
with an O-ring. An expanded ethylene
propylene rubber tube (PST) is slipped
over the base of the enclosure and onto
a gel sealing collar. Pulling a plastic
rip cord on the PST allows it to shrink
to the minimum outside diameter
necessary to form a tight seal. The
flexible tubing material conforms
to the shape of the collar, sealing
out both air and water.
The kit is available in four sizes,
which accommodate splices from
25- to 900-pair. For encapsulated
plant, three sizes are available which
accommodate splices from 25- to
600-pair.
RUS Listed
134
208
Compounds/Encapsulants
pg. 185
Shield Bonding
pg. 200
Cable Lubricants
pg. 322
3M™ Scotchlok™ Connectors
pg. 2
3M™ MS2™ Modules
pg. 6
Tapes
pg. 189
Sheath Scuff
pg. 199
Pair Saver
pg. 199
Cable Ties
pg. 204
Re-enterable PST Dome Closures
Unique latching system to secure dome to
the sealed base
Easily re-enterable, no reentry kit, seal
undisturbed at reentry, no tools needed to
reenter
Gel end seal
Air tight seal over multiple cable diameters
and configurations
Retrofits existing PST
Multiple applications
Specifications for 3M™ Re-enterable PST Dome Closure Kits
4604
4606
4608
Closure Outside Dimension
97 x 71 (3.8 x 2.8)
W x D mm (in.)
142 x 99 (5.6 x 3.9)
178 x 137 (7.0 x 5.4)
Closure Height (H) mm (in.)
572 (22.5)
572 (22.5)
597 (23.5)
64 (2.5)
mm (in.)
99 (3.9)
135 (5.3)
CAD 4
CAD 6
CAD 8
Main Cables mm (in.)
13-28 (0.5-1.1)
23-41 (0.9-1.6)
36-64 (1.4-2.5)
Terminal Cables mm (in.)
10-15 (0.4-0.6)
10-15 (0.4-0.6)
10-20 (0.4-0.8)
Approx. Bundle Diameter
Minimum Reliable CAD
Pedestal
Branch Cables mm (in.)
–
18-25 (0.7-1.0)
23-33 (0.9-1.3)
Drop Cables mm (in.)
9 max. (0.35 max.)
2 cable max.
9 max. (0.35 max.)
2 cable max.
9 max. (0.35 max.)
2 cable max.
*Approx. Splice Range
100 pr.-MS2™
50 pr.-UR2
300 pr.-MS2
100 pr.-UR2
600 pr.-MS2
300 pr.-UR2
15/cs.
17.0 (37.5)
9/cs.
15.6 (34.4)
5/cs.
12.2 (26.8)
15 kits
9 kits
5 kits
051138-36513
051138-36514
051138-36515
Ordering Information
Packaging
kg (lbs.)
Minimum Order
UPC
*NOTE: Based on 2 bank MS2™ 4000-DWP Modules and Scotchlok™ Connectors installed per 3M practices. Examples: 100-pair means 100-pair In and 100-pair
Out or 100 pair straight splice.
Kit components included: Closure Assembly, Dome, Base, O-Ring, Latch, Gel End Seal, Ground Wires,
PST Sheath Scuff, Desiccant Bag.
Companion products needed: Scotch® Vinyl Tape 88T 38 mm (1-1/2") Wide, 130C LR Rubber Tape,
3M™ Scotchlok™ Shield Bond Connectors 4460 Series, 3M™ Scotchlok™ UR2 or MS2 Splice Connectors, 6228 Cable Ties,
381 mm (15").
Ordering Information for 3M™ Re-enterable Dome Closure Accessories
Product Number
Size
cm (in.)
Packaging
kg (lbs.)
Minimum Order
UPC
4604-PST Pull N’ Shrink Tubing
11.4 x 13.3 (4.8 x 5.25)
5/cs., 2,4 (5.5)
5 each
054007-92231
4606-PST Pull N’ Shrink Tubing
14.6 x 15.8 (5.75 x 6.25)
5/cs., 4,0 (8.92)
5 each
054007-92230
4608-PST Pull N’ Shrink Tubing
18.4 x 18.4 (7.25 x 7.25)
5/cs., 9,4 (20.78)
5 each
054007-92229
6.3 x 50.7 (2.5 x 20)
50/cs., 9,4 (20.78)
50 each
054007-92221
–
100/cs., 3,6 (8.0)
100 each
051138-36517
4600-GSS Gel Sealant Strip
4600-NID Non-Indicating
Desiccant Bags
135
Ordering Information for 3M™ Gel-Wrap PST Closure Accessories
Product Number
Packaging
kg (lbs.)
Minimum Order
UPC
5.9 (13)
10 each/cs.
051138-57700
GW-922- Gel Wrap
Ordering Information for 3M™ PST Pedestal Closure Accessories
Product Number
136
Size
mm (in.)
Packaging
kg (lbs.)
Minimum Order
UPC
4634-R PST Pedestal Splice
Closure Re-entry Kit
76.2 (3.0)
1/box, 10/cs., 3.4 (7.6)
10 kits
054007-17480
4635-R PST Pedestal Splice
Closure Re-entry Kit
114.3 (4.5)
1/box, 10/cs., 5.4 (12.1)
10 kits
054007-17481
4636-R PST Pedestal Splice
Closure Re-entry Kit
152.4 (6.0)
1/bag, 5/cs., 4.5 (9.95)
5 kits
054007-17654
2900-R Sealing Collar Tape
38 x 1.5 m (1.5 x 5')
5/box 50/cs.,14.4 (31.9)
50 rolls
054007-68546
4637-R PST Pedestal Splice
Closure Re-entry Kit
–
5/cs., 10.1 (22.4)
5 kits
054007-71534
3M™ Foam-Sealed Closures
Closure Selection Guide
To order Foam-Sealed Closures, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
Foam-Sealed Closures enclose cable
plant splices in direct buried, hand
hole, and man hole applications.
They also protect cable splices from
environmental elements found in these
applications and enclose a variety of
cable configurations. The closures are
also used to easily accommodate
distribution drops from the main cable.
The methods used in foam-sealed
closures have evolved from early
gravity filled methods to compound
compression methods.
Foam-Sealed Closure
Foam Sealed Closures use the
Compound Compression method to
apply the pressure to the encapsulant.
The polyethylene closure body is over
wrapped with the armorcast structural
material for physical strength. 3M
4411 expandable sealant is used to fill
the void between the closure body and
the compound compression splice. The
expandable foam adheres to the
closure body, E-Z wrap and the cable
sheath which in turn provides a water
tight barrier around the splice and
cables entering the closure.
Buried Compound
Compression
The Better Buried Compound
Compression Closure method forces
the encapsulant up the cable core to
209
stop water ingress. The product is
simple to install, comes with the
spacer web and plastic wrap and is
used to hold and force the encapsulant.
The product is offered in different
sizes to cover various cable ranges and
can be easily extended and bricked.
The Better Buried and 89 Series
Closures use a gravity fill method of
encapsulating and protecting the cable
splice. Both kits are simple to install
and are offered with a full product
offering to cover the complete cable
ranges found in the outside plant. In
addition, both kits can be ordered
with 4442 High Gel re-enterable
encapsulant. The 89 Series can also
Better Buried Closures
210
be purchased with 4407 Encapsulant
for making a permanent, hard
encapsulated closure with maximum
water protection.
Foam-Sealed Closures
Compounds/Encapsulants
pg. 185
Shield Bonding
pg. 200
Cable Lubricants
3M™ Scotchlok™ Connectors
Few loose parts
Easy assembly and improved productivity
pg. 322
No heat required
Adjustable closure diameter
Eliminate safety concerns
Minimizes compound usage and total cost
pg. 2
Tough outer shell
Can be used in harsh environments
Rigid body closure
Easy re-entry, physical strength
Rigid bonding assembly
Increased physical strength, provides more
support to the cable
Solvent resistant
Gasoline won’t erode expandable foam
and armorcast
3M MS Modules
pg. 6
Tapes
pg. 189
Sheath Scuff
pg. 199
Pair Saver
pg. 199
Cable Ties
pg. 204
™
2™
Can be cut with a zip cord
Easy re-entry & saves time
Can be extended easily
No need to stock different sizes
Total kit
No need to order individual parts,
reduces total cost
137
Ordering Information for 3M™ Foam-Sealed Closure with Compound Compression
Product Number
FSC2x12
Splice Bundle Diameter
mm (in.)
31 (1.25)
50 (2)
228 (9)
255 (10)
Max. Splice Opening
mm (in.)
Closure Length End-To-End
mm (in.)
3M™ MS2™ 4000 DWP Module
Splice Max.
FSCFSC3x12 S 3x12 L
FSC3x19
FSC3x21
FSC4x19
FSC4x21
76 (3)
76 (3)
76 (3.0)
100 (3.9) 100 (3.9) 145 (5.7) 190 (7.48) 190 (7.48)
255 (10)
430 (17)
533 (21)
430 (17)
533 (21)
FSC6x19
480 (19)
FSC8x19
480 (19)
FSC8x19 L
480 (19)
90 (15.25) 546 (21.5) 546 (21.5) 724 (28.5) 838.2 (33) 724 (28.5) 838.2 (33) 775 (30.5) 775 (30.5) 775 (30.5)
0
100/24
200/24
400/24
400/24
600/24
600/24
1200/24
2400/26
2700/26
3M™ Scotchlok™ Connector
Splice UY2
25/22
75/24
200/24
400/24
400/24
600/24
600/24
1200/24
2400/26
2700/26
Approx. Compound Required
ml (g)
165
-150
385
-350
769
-700
1648
-1500
1868
-1700
2473
-2250
2857
-2600
5769
-5250
8242
-7500
9890
-9000
Packaging
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
Minimum Order
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
1 kit
75365
70899
70901
70900
76153
70902
76154
70903
70904
70905
Ordering Information
UPC 051138-
Additional products needed to complete this product:
• Splicing Connectors and External Bonding Kit (if necessary)
• Encapsulant
• E-Z Wrap
138
3M™ Better Buried Closures
Closure Selection Guide
To order Better Buried Closures, follow these steps:
1. Determine closure size using pair capacity and maximum opening, (i.e. = BB2 x 12)
2. Using closure size from Step 1, determine splice and cable configuration code. (i.e. = SB/2SC-LHS)
(Combine steps 1 and 2 to determine product number (i.e. = BB2 x 12 SB/2SC-LHS))
Product Nomenclature:
BB
FC
DC
SW
LHS
=
=
=
=
=
Better Buried
Flat Cap
Double Port End Cap
Spaces Web
Locking Harness System
SC
SB
PC
TC
DS
=
=
=
=
=
Single Port End Cap
Strain Relief Bond Bar
Puddle Cap
Triple Port End Cap
Double Sleeve
Closure Capacity for BB2x12 through BB4x12
Step 1
Description
Better Buried Closures
BB2x12
BB2x24
BB3x12
BB3x24
BB4x12
Splice Bundle Diameter mm (in.)
50 (2)
50 (2)
75 (3)
75 (3)
100 (4)
Max. Splice Opening mm (in.)
177 (7)
425 (17)
177 (7)
425 (17)
177 (7)
Closure Length End To End mm (in.)
400 (16)
700 (28)
400 (16)
700 (28)
400 (16)
MS2™ 4000 DWP Module Splice
Maximum Pair Capacity
50-pr.
100-pr.
100-pr.
200-pr.
200-pr.
Scotchlok™ Connector UR2/UR
25-pr.
50-pr.
75-pr.
100-pr.
150-pr.
Approx. Compound Required
ml (g*)
660
(600)
1,320
(1,200)
1,320
(1,200)
3,300
(3,000)
2,500
(2,250)
*Grams of 4442 High Gel Re-enterable Encapsulant based on the density of 1.1ml (0.9g). The density of other re-enterable encapsulants will vary.
Splice and Cable Configurations for BB2x12 through BB4x12
Step 2
Description
BB2x12
BB2x24
BB3x12
BB3x24
BB4x12
SB/2SC-LHS
SB/2SC-LHS
–
SB/2SC-LHS
SB/2DC-LHS
–
SB/SC, DC-LHS
–
SB/SC, DC-LHS
–
In-line Splice With 1 Single & 1 Double
End Cap, (SB/SC, DC-LHS), Plus
4462 Shield Bond Connector And 4442
High Gel (1 in/2 out)
4462/High Gel
SC, DC-LHS
4462/High Gel
SC, DC-LHS
–
4462/High Gel
SC, DC-LHS
–
In-line Splice With 2 Double End Caps
(2 in/2 out)
–
–
SB/2DC-LHS
–
–
In-line Splice With 1 Double & 1 Triple
End Cap (2 in/3 out)
–
–
–
–
–
2BB BUTT-LHS
–
3BB BUTT-LHS
–
4BB BUTT-LHS
In-line Splice With Single End Caps
(1 in/1 out)
In-line Splice With 1 Single
& 1 Double End Cap (1 in/2 out)
Butt Splice With End Cap
End Caps and Closure Extension Sleeves for BB2x12 through BB4x12
Accessories
Description
BB2x12
BB2x24
BB3x12
BB3x24
BB4x12
Single Entry
2" SC-LHS BB
2" SC-LHS BB
3" SC-LHS BB
3" SC-LHS BB
4" SC-LHS BB
Double Entry
2" DC-LHS BB
2" DC-LHS BB
3" DC-LHS BB
3" DC-LHS BB
4" DC-LHS BB
–
–
–
–
–
Triple Entry
1 Flat Cap, 1 Puddle Cap
Sleeve Name
–
–
–
–
4" BB FC/PC
2DS-12-BB
2DS-24-BB
3DS-24-BB
3DS-24-BB
4DS-24-BB
139
Ordering Example: BB2x24 SB/SC, DC-LHS
BB
2x24
SB
SC
DC
LHS
=
=
=
=
=
=
A Better Buried Closure
2 inch Diameter, 24 inch Length
Strain Relief Bond Bar
One Single Port End Cap
One Double Port End Cap
Locking Harness System
Closure Capacity for BB4x24 through BB9x26
Step 1
Description
Better Buried Closures
BB4x24
BB5x26
BB6x26
BB7x26
BB9x26
Splice Bundle Diameter mm (in.)
100 (4)
125 (5)
150 (6)
175(7)
225(9)
Max. Splice Opening mm (in.)
425 (17)
475 (19)
475 (19)
475 (19)
475 (19)
Closure Length End To End mm (in.)
750 (30)
750 (30)
750 (30)
750 (30)
750 (30)
MS2™
4000 DWP Module Splice
Maximum Pair Capacity
400-pr.
600-pr.
900-pr.
1,200-pr.
2,400-pr.
Scotchlok™ Connector UR2/UR
200-pr.
300-pr.
400-pr.
600-pr.
900-pr.
Approx. Compound Required
ml (g)
5,000
(4,500)
8,300
(7,200)
13,750
(12,500)
16,500
(15,000)
23,100
(21,000)
Splice and Cable Configurations for BB4x24 through BB9x26
Step 2
Description
BB4x24
BB5x26
BB6x26
BB7x26
BB9x26
SB/2SC-LHS
SB/2SC-LHS
–
–
–
SB/SC, DC-LHS
SB/SC, DC-LHS
–
–
–
In-line Splice With 1 Single & 1 Double
End Cap, (SB/SC, DC-LHS), Plus
4462 Shield Bond Connector And 4442
High Gel (1 in/2 out)
4462/High Gel
SC, DC-LHS
4462/High Gel
SC, DC-LHS
–
–
–
In-line Splice With 2 Double End Caps
(2 in/2 out)
–
–
SB/2DC-LHS
SB/2DC-LHS
SB/2DC-LHS
In-line Splice With 1 Double & 1 Triple
End Cap (2 in/3 out)
–
–
–
SB/DC, TC-LHS
SB/DC, TC-LHS
SW/FC, PC-LHS
SW/FC, PC-LHS
–
SW/FC, PC-LHS
–
In-line Splice With Single End Caps
(1 in/1 out)
In-line Splice With 1 Single
& 1 Double End Cap (1 in/2 out)
Butt Splice With Double End Cap
End Caps and Closure Extension Sleeves for BB4x24 through BB9x26
Accessories
Description
BB5x26
BB6x26
BB7x26
BB9x26
Single Entry
4" SC-LHS BB
5" SC-LHS BB
–
–
–
Double Entry
4" DC-LHS BB
5" DC-LHS BB
6" DC-LHS BB
7" DC-LHS BB
9" DC-LHS BB
Triple Entry
1 Flat Cap, 1 Puddle Cap
Sleeve Name
140
BB4x24
–
–
–
7" TC-LHS BB
9" TC-LHS BB
4" BB FC/PC
5" BB FC/PC
–
7" BB FC/PC
–
4DS-24-BB
5DS-26-BB
6DS-26-BB
7DS-26-BB
9DS-26-BB
Ordering Information for Better Buried Closure Complete Kits
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
BB2x12/4462/High Gel
1/cs., 1.4 (3.2)
1 kit
051138-36502
BB2x24/4462/High Gel
1/cs., 2.6 (5.8)
1 kit
051138-36503
BB3x24/4462/High Gel
1/cs., 5.9 (13.0)
1 kit
051138-36504
BB4x24/4462/High Gel
1/cs., 8.6 (19.0)
1 kit
051138-36505
BB5x26/4462/High Gel
1/cs., 13.1 (28.8)
1 kit
051138-36506
Minimum Order
UPC
Note: Kits do not include Scotchlok, MS2 or 710 connectors.
Ordering Information for Better Buried Closure Kits
Product Number
Packaging
kg (lbs.)
BB2x12 SB/2SC-LHS
10/cs., 6.3 (13.8)
10 kits
054007-68228
BB2x24 SB/2SC-LHS
1/cs., 1.4 (3.0)
1 kit
054007-68230
BB3x24 SB/2SC-LHS
1/cs., 1.8 (3.9)
1 kit
054007-68236
BB4x24 SB/2SC-LHS
1/cs., 2.3 (5.1)
1 kit
054007-68241
BB5x26 SB/2SC-LHS
1/cs., 3.2 (7.1)
1 kit
054007-68246
BB2x12 SW/FC, DC-LHS
1/cs., 0.7 (1.5)
1 kit
054007-71342
BB3x12 SW/FC, DC-LHS
1/cs., 0.9 (2.0)
1 kit
054007-71343
BB4x12 SW/FC, DC-LHS
1/cs., 1.1 (2.5)
1 kit
054007-63209
BB4x24 SW/FC-PC
1/cs., 2.08 (4.6)
1 kit
054007-63923
BB5x26 SW/FC-PC
1/cs., 3.2 (7.0)
1 kit
054007-63836
BB7x26 SW/FC-PC
1/cs., 4.9 (9.0)
1 kit
054007-68215
BB2x24 SB/SC, DC-LHS
1/cs., 1.4 (3.0)
1 kit
054007-68229
BB3x12 SB/SC, DC-LHS
1/cs., 0.9 (2.0)
1 kit
051138-57551
BB3x24 SB/SC, DC-LHS
1/cs., 1.7 (3.7)
1 kit
054007-68235
BB4x24 SB/SC, DC-LHS
1/cs., 1.7 (3.7)
1 kit
054007-68240
BB5x26 SB/SC, DC-LHS
1/cs., 2.3 (5.0)
1 kit
051138-36506
BB3x24 SB/2SC, DC-LHS
1/cs., 1.8 (3.9)
1 kit
054007-68236
BB4x24 SB/2SC, DC-LHS
1/cs., 1.7 (3.7)
1 kit
054007-68240
BB4x12 SB/2DC-LHS
1/cs., 1.1 (2.5)
1 kit
051138-57936
BB6x26 SB/2DC-LHS
1/cs., 3.6 (8.0)
1 kit
054007-71373
BB7x26 SB/2DC-LHS
1/cs., 4.2 (9.3)
1 kit
054007-71375
BB9x26 SB/2DC-LHS
1/cs., 5.1 (11.3)
1 kit
054007-71377
BB7x26 SB/DC, TC-LHS
1/cs., 4.7 (10.4)
1 kit
054007-71374
BB9x26 SB/DC, TC-LHS
1/cs., 5.9 (13.0)
1 kit
054007-71376
Minimum Order
UPC
Note: Kits do not include encapsulant, shield bond connectors or 2900R and 130C tapes.
Ordering Information for Better Buried Closure Accessories
Product Number
Packaging
kg (lbs.)
4430 Spacer Web 3x20
2/cs., 1.04 (2.3)
2 each
054007-30362
4430 Spacer Web 6x20
1/cs., 0.90 (2.0)
1 each
054007-30361
141
Ordering Information for Better Buried Closure Kit Spare Parts
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
2SC-LHS BB
10/cs., 0.9 (2.0)
10 each
054007-68289
2DC-LHS BB
10/cs., 1.0 (2.3)
10 each
054007-68290
2DS-24-BB
10/cs., 7.4 (16.4)
10 each
054007-31070
3SC-LHS BB
10/cs., 1.4 (3.0)
10 each
054007-68291
3DC-LHS BB
10/cs., 1.4 (3.0)
10 each
054007-68292
3DS-24-BB
10/cs., 12 (26.5)
10 each
054007-31071
4SC-LHS BB
10/cs., 1.8 (4.0)
10 each
054007-68293
4DC-LHS BB
10/cs., 2.3 (5.0)
10 each
054007-68294
4BB FC/PC
10/cs., 2.3 (5.0)
10 kits
054007-68283
4DS-24-BB
10/cs., 16.1 (35.4)
10 each
054007-31072
5SC-LHS BB
10/cs., 2.7 (6.0)
10 each
054007-68295
5DC-LHS BB
10/cs., 3.2 (7.0)
10 each
054007-68296
5BB FC/PC
10/cs., 3.2 (7.0)
10 kits
054007-68284
5DS-26-BB
10/cs., 13.6 (30.0)
10 each
054007-31809
1/cs., 0.5 (1.0)
1 each
054007-71391
6DC-LHS BB
6DS-26-BB
1/cs., 2.9 (6.5)
1 each
054007-34039
7DC-LHS BB
1/cs., 0.5 (1.0)
1 each
054007-71394
7TC-LHS BB
1/cs., 0.5 (1.0)
1 each
054007-71393
7BB FC/PC
5/cs., 2.3 (5.0)
5 kits
054007-68285
7DS-26-BB
1/cs., 3.4 (7.5)
1 each
054007-31915
9DC-LHS BB
1/cs., 0.5 (1.0)
1 each
054007-71395
9TC-LHS BB
1/cs., 0.5 (1.0)
1 each
054007-71396
9DS-26-BB
1/cs., 4.9 (9.0)
1 each
054007-31916
Minimum Order
UPC
Ordering Information for Compound Compression Kits
Product Number
Packaging
kg (lbs.)
BB2x12CC SB/2SC-LHS
10/cs., 8.16 (18.0)
10 kits
054007-91422
BB2x24CC SB/2SC-LHS
10/cs., 1.49 (3.3)
1 kit
054007-91423
BB3x12CC SB/2SC-LHS
1/cs., 1.36 (3.0)
1 kit
054007-91572
BB3x24CC SB/2SC-LHS
1/cs., 1.81 (4.0)
1 kit
054007-92836
BB4x24CC SB/2SC-LHS
1/cs., 2.72 (6.0)
1 kit
054007-91424
BB5x26CC SB/2SC-LHS
1/cs., 3.62 (8.0)
1 kit
054007-92837
BB6x26CC SB/2DC-LHS
1/cs., 4.53 (10.0)
1 kit
054007-91425
BB7x26CC SB/2DC-LHS
1/cs., 5.21 (11.5)
1 kit
054007-92838
BB9x26CC SB/2DC-LHS
1/cs., 5.57 (12.3)
1 kit
054007-92839
BB/CC-R
1/cs., 0.90 (2.0)
1 kit
054007-92842
Note: Kits do not include encapsulant or shield bond connectors.
142
Maximum Splice Bundle Capacities (Straight Splice) for Better Buried Compound
Compression Kits
Product Number
4000-DWP or
UR Connectors
25-pair modular connector
(w/3" Pigtails)
UPC
BB2x12CC SB/2SC-LHS
50 pr., 24 AWG (0.5 mm)
25 pr., 22 AWG (0.6 mm)
054007-91422
BB3x12CC SB/2SC-LHS
100 pr., 22 AWG (0.6 mm)
75 pr., 22 AWG (0.6 mm)
054007-91572
BB2x24CC SB/2SC-LHS
100 pr., 24 AWG (0.5 mm)
50 pr., 22 AWG (0.6 mm)
054007-91423
BB3x24CC SB/2SC-LHS
200 pr., 24 AWG (0.5 mm)
100 pr., 22 AWG (0.6 mm)
054007-92836
BB4x24CC SB/2SC-LHS
400 pr., 24 AWG (0.5 mm)
200 pr., 22 AWG (0.6 mm)
054007-91424
BB5x26CC SB/2SC-LHS
600 pr., 24 AWG (0.5 mm)
300 pr., 22 AWG (0.6 mm)
054007-92837
BB6x26CC SB/2DC-LHS
900 pr., 24 AWG (0.5 mm)
400 pr., 22 AWG (0.6 mm)
054007-91425
BB7x26CC SB/2DC-LHS
1200 pr., 24 AWG (0.5 mm)
600 pr., 22 AWG (0.6 mm)
054007-92838
BB9x26CC SB/2DC-LHS
2400 pr., 24 AWG (0.5 mm)
900 pr., 22 AWG (0.6 mm)
054007-92839
–
–
054007-92842
BB/CC-R Reentry Kit
Closure Dimension Guide for Better Buried Closures
Closure End Cap Port Diameters
Closure Size
Single Entry
(Maximum)
Max. Splice Openings
Multiple Entry (Maximum)
1
2
3
Single
Sheath
Double Sheath
Outer
Inner
Approx.
Amount of
Compound
Required
Average
Splice
BB2x12
2" x 12" (50 x 305 mm)
1.2"
30 mm
1.2"
30 mm
0.7"
18 mm
–
5"
127 mm
–
–
21 oz.
600 g
BB3x12
3" x 12" (76 x 305 mm)
1.6"
41 mm
1.6"
41 mm
1.0"
25 mm
–
5"
127 mm
–
–
42 oz.
1200 g
BB2x24
2" x 24" (50 x 610 mm)
1.2"
30 mm
1.2"
30 mm
0.7"
18 mm
–
17"
432 mm
17"
432 mm
14"
356 mm
42 oz.
1200 g
BB3x24
3" x 24" (76 x 610 mm)
1.6"
41 mm
1.6"
41 mm
1.0"
25 mm
–
17"
432 mm
17"
432 mm
14"
356 mm
106 oz.
3000 g
BB4x24
4" x 24" (102 x 610 mm)
2.0"
51 mm
2.0"
51 mm
1.5"
38 mm
–
17"
432 mm
17"
432 mm
14"
356 mm
159 oz.
4500 g
BB5x26
5" x 26" (127 x 660 mm)
2.4"
61 mm
2.4"
61 mm
1.8"
46 mm
–
19"
483 mm
19"
483 mm
16"
406 mm
254 oz.
7200 g
BB6x26
6" x 26" (152 x 660 mm)
3.3"
84 mm
2.7"
68 mm
2.0"
50 mm
1.5"
38 mm
19"
483 mm
19"
483 mm
16"
406 mm
441 oz.
12500 g
BB7x26
7" x 26" (178 x 660 mm)
3.5"
89 mm
3.5"
89 mm
2.2"
56 mm
2.2"
56 mm
19"
483 mm
19"
483 mm
16"
406 mm
530 oz.
15000 g
BB9x26
9" x 26" (229 x 660 mm)
4.0"
102 mm
4.0"
102 mm
2.5"
64 mm
2.5"
64 mm
19"
483 mm
19"
483 mm
16"
406 mm
742 oz.
21000 g
143
3M™ Scotchcast™ Closures 89 Series
Closure Selection Guide
To order Scotchcast Closures 89 Series, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
Re-enterable Encapsulant for easy
re-entry and include:
• 3M™ Scotchlok™ 4462-Shield Bond
Connectors
• Scotch® 130C Tape
• Scotch® 88T Tape
• 3M™ Scotchcast™ 4435 Sheath Scuff
8981/High Gel, 8982/High Gel,
8983/High Gel, 8984/High Gel,
8985/High Gel, 8986/High Gel
RUS Listed
These rigid body closures use a
gravity fill method of encapsulating
and protecting cables. They are packed
with 4442 High Gel Re-enterable
Encapsulant/8882 High Gel
RUS Listed
211
Ordering Information for 3M Scotchcast Closures 89 Series/Re-enterable Encapsulant
Product number
Splice Bundle Diameter mm (in.)
8981
High Gel
8982-4462
High Gel
8983-4462
High Gel
8984-4462
High Gel
8985-4462
High Gel
8986-4462
High Gel
13 (0.5)
23 (0.9)
32 (1.25)
57 (2.25)
88 (3.5)
119 (4.75)
Max. Splice Opening mm (in.)
38 (1.5)
132 (5.25)
244 (9.75)
225 (9.0)
425 (17)
425 (17)
Closure Length End To End mm (in.)
182 (7.2)
273 (10.75)
396 (15.6)
400 (15.75)
622 (24.5)
635 (24.5)
4-pr.
18-pr.
50-pr.
100-pr.
400-pr.
600-pr.
–
–
50-pr.
100-pr.
400-pr.
600-pr.
Approx. Compound Included
90 ml
(82 grams)
300ml
(266 grams)
660 ml
(600 grams)
1,320 ml
(1,200 grams)
2,640 ml
(3,000 grams)
6,600 ml
(6,000 grams)
Packaging
kgs (lbs.)
1/box 10/cs.
2.9 (6.4)
1/cs.
5.7 (12.5)
1/cs.
10.3 (22.6)
1/cs.
2.1 (4.6)
1/cs.
4.7 (10.3)
1/cs.
9.1 (20.0
10 kits
10 kits
Scotchlok Connector UR2/UR
MS ™ 4000 DWP Module Splice
Maximum Pair Capacity
2
Minimum Order
UPC
051138-36496 051138-36497
10 kits
1 kit
1 kit
1 kit
051138-36498
051138-36499
051138-36500
051138-36501
Additional products needed to complete this closure: 4458 Pair Save; Scotchlok™, MS2™ or 710 Connectors.
Ordering Information for 8882 Re-enterable Closures
Product Number
144
UPC
8981-8882
051115-14653
8982-8882
051115-14654
8983-8882
051115-14655
8984-8882
051115-14656
8985-8882
051115-14657
8986-8882
051115-14658
3M™ Scotchcast™ PIC
Encapsulating Closure Kits
(Non Re-enterable)
of translucent polypropylene and are
packed with 4407 Urethane Compound
and rubber tape strips for sealing ends
of closure.
These rigid body closures are made
212
Ordering Information for 3M™ Scotchcast™ Closures 89 Series/Hard Encapsulant (non re-enterable)
Product Number
Splice Bundle Diameter mm (in.)
8981-07
8982-07
8983-07
8984-07
8985-07
8986-07
13 (0.5)
23 (0.9)
32 (1.25)
57 (2.25)
88 (3.5)
119 (4.75)
Max. Splice Opening mm (in.)
38 (1.5)
132 (5.25)
244 (9.75)
225 (9.0)
425 (17)
425 (17)
Closure Length End To End mm (in.)
182 (7.2)
273 (10.75)
396 (15.6)
400 (15.75)
622 (24.5)
635 (24.5)
Scotchlok Connector UR2/UR
4-pr.
18-pr.
50-pr.
100-pr.
400-pr.
600-pr.
MS2 4000 DWP Module Splice
Maximum Pair Capacity
–
–
–
100-pr.
400-pr.
600-pr.
Approx. Compound Included
90 ml
(94 grams)
300ml
(300 grams)
660 ml
(675 grams)
1,320 ml
(1,350 grams)
2,640 ml
(3,375 grams)
6,600 ml
(6,750 grams)
Packaging
kgs (lbs.)
1/box 10/cs.
3.1 (6.8)
1/box 10/cs.
6.2 (13.6)
1/box 10/cs.
11.2 (24.7)
1/cs.
2.1 (4.6)
1/cs.
4.9 (10.7)
1/cs.
9.3 (20.5)
10 kits
10 kits
10 kits
1 kit
1 kit
1 kit
054007-30853
054007-33376
054007-33374
054007-30854
Minimum Order
UPC
054007-30851 054007-30852
Additional products needed to complete this closure: 4458 Pair Saver; Scotchlok, MS2 or 710 Connectors; Bonding Strap; Tapes (88T tape, DR tape, B sealing tape
strips); Shield Bond Connectors; Sheath-Stuff; Cable Ties.
Kit Contents
4407 Kit
Left and Right Closure Halves
Upper and Lower Closure Halves
Pour Spouts
8981
8982
8983
8984
8985
8986
yes
yes
yes
–
–
–
–
–
–
yes
yes
yes
(2)
(2)
(2)
–
–
–
#23 Tape Strips
(3)
(3)
(3)
(3)
(3)
(3)
Spacer Web
yes
yes
yes
yes
yes
yes
Cover
–
–
–
yes
yes
yes
Fiberglass Strip-Bulk Roll
–
–
–
(2)
(2)
(2)
yes
yes
yes
yes
yes
yes
8981
8982
8983
8984
8985
8986
yes
yes
yes
–
–
–
–
–
–
yes
yes
yes
4442 Encapsulating Compound
yes
yes
yes
yes
yes
yes
4464 Service Wire Shield Connector
yes
–
–
–
–
–
4460-D Shield Bond Connectors
4407 Encapsulating Compound
4442 Kit
Left and Right Closure Halves
Upper and Lower Closure Halves
(2)
yes
yes
(2)
–
–
4462-FN Shield Connectors
–
–
–
–
(4)
(4)
Strain Relief Bar
–
–
–
11.5" (292 mm)
Bonding Strap 6.5" (165 mm)
–
yes
yes
–
–
–
Pour Spouts
(2)
(2)
(2)
–
–
–
#23 Tape Strips
(3)
–
–
–
–
–
–
(1)
(1)
(1)
(1)
(1)
DR Tape
(2) 9.5" (495 mm) (2) 19.5" (495 mm)
88T Vinyl Tape
–
(1)
(1)
(1)
(1)
(1)
B Sealant Tape Strips
–
(1)
(1)
(2)
(2)
(2)
Spacer Web
yes
yes
yes
yes
yes
yes
Spacer Tube
–
yes
yes
yes
(2)
(2)
Sheath Scuff
Cable Ties
Cover
–
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
–
–
–
yes
yes
yes
145
3M™ SLiC™ 5-Pair Buried
Service Wire Kit
3M™ PST/Gel Buried Service
Wire Splice Kit 3838
3M™ Scotchcast Cable
Capping Kit 3821
217
213
Protecting a buried service wire splice
is now easier than ever with the SLiC
Buried Service Wire Kit. The BSW
kit is a three-part, rigid body closure
that self-encapsulates two- and fivepair buried service wire. It has a builtin bonding system that bonds the
buried service wire shield as the splice
is put together—and it contains a
revolutionary new sealant.
The special formulated sealant is a
one-part, no-mix, non-urethane
product containing no grease. The
sealant serves as an electrical insulator
and reacts upon moisture contact to
prevent water ingression. At the point
of water incursion, the sealant hardens
and forms a water-resistant barrier.
215
Designed specifically for cable capping,
this kit includes a clear plastic cup. The
3821 kit accepts a 300-pair 0.6 mm (22
AWG) or 400-pair 0.5 mm (24 AWG).
Also included in the kit is fast
curing 17 compound in the Unipak
Container. Instructions are provided.
38 mm (1-1/2") O.D.
3M™ Scotchcast Buried
Service Wire Splice Kit 3832
The 3838 PST/Gel Buried Service
Splice Kit is a flexible and “noncompound” splicing system that
provides fast, reliable and easy
protection. This kit will accommodate
inline, butt and extended splices of up
to six pair buried service wire. The
new kit utilizes non-toxic PST and
Gel technology and provides an
excellent waterproof environment.
It meets tough qualification tests
such as impact and pull-out resistance,
water immersion and freeze thaw
cycle test in wet sand. The shield
bond connector is specially designed
to provide good electrical continuity
and strain relief at the same time.
The 3838 PST/Gel buried service
wire kit is simple to use and requires
minimal training.
3M™ Scotchcast™ Buried
Service Wire Splicing/Cable
Capping Kit 3817
218
216
214
For buried service wire splicing and
end capping. Kit contains T foam
spacer pad, 17 compound in “J” size
bag, 75 g (2.65 oz.) Unipak container.
Packaged in poly bag with
instructions.
146
The Scotchcast Buried Service Wire
Splice Kit 3832 will accommodate
inline and butt splices of up to fivepair filled or unfilled service wire. One
“A” size bag of 4403 encapsulant and
a split bolt are provided with the kit.
Once the compound has been poured,
an outer tube is rotated over the barrel
opening to seal the unit, requiring no
waiting for the compound to cure
before the kit is buried.
3838 PST/Gel Buried Service Wire Splice Kit
PST/Gel technology
Proven reliability; waterproof performance
saves maintenance costs, keeps lines up and
running
Passes freeze/thaw cycle test in wet sand
No return dig-ups; saves repair costs
Used for butt and in-line splicing
Addresses multiple splicing configurations;
reduces inventory hassles and costs
No encapsulant mixing
Reduces installation time and reduces waste
Universal sizing, "push type" strain relief
and shield connector
Fits all needs; inventory savings. No special
tools required; no tooling costs
Fewer piece parts
Fast assembly; reduced labor
No compound
No curing time; can be buried immediately
Easy installation
Craft friendly with minimal training
Applicable in extreme temperatures
No scheduling or weather constraints
Ordering Information for Buried Service Wire and End Capping Kits
Product Number
Packaging
kg (lbs.)/cs.
Min. Order
UPC
1 kit/bag, 12 kits/cs.
2.3 (5.0)
12 kits
054007-71531
1 kit/bag, 12 cs.
1.45 (3.2)
12 kits
054007-32217
SLiC™ 5-pair
Buried Service Wire Kit
3817
Buried Service Wire Splicing/Cable Capping Kit
38.100 mm (1 1/2"), O.D.
3832
Buried Service Wire Splice Kit with Split Bolt
1/bag, 12/cs.
1.9 (4.2)
12 kits
054007-32224
3821
Cable Capping Kit
22.225 mm + 38.100 mm (7/8"+ 1 1/2") O.D.
1/bag, 12/cs.
1.7 (3.8)
12 kits
054007-32220
3838
includes the
following:
PST/Gel Buried Service Wire Splice Kit
Gel Blanket (1)
4360 Pull ‘N’ Shrink Tubing (1)
4463 Shield Bond Assembly (1)
23 Tape Strip (1)
1 kit/1 box (.625 lbs)
1 kit
054007-11455
147
3M™ 2-Type PEAK (Pressure
Encapsulated Apparatus Kit)
Closure Selection Guide
To order PEAK, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
A pressure encapsulation technique
for spliced connections of filled
communication cable using the
3M 2-Type Closure System. For
underground or direct buried
applications in straight or multiple
branch configurations.
The PEAK Closure Kit provides
moisture protections and prevents
water migration into the splice bundle.
The closure is impact-tough and
provides double protection as static
air pressure surrounds the encapsulated
splice. The closure is re-enterable
and made for use with (PIC) filled,
waterproof cable.
This encapsulated closure system
will accommodate the entrance of
up to four cables, 81mm (3.2") in
diameter and up to 3,000 pairs of
copper conductor splices. It will also
allow cable sheath openings from
254 mm (10") to 914 mm (36").
219
Ordering Information for 2-Type PEAK Closure Guide –
Re-entry Kits, Accessories and Replacement Parts
Product
Number
2-Type Max. Splice
Cover Bundle Dia.
Assembly
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Encaps.
Req.
grams
Approx.
Weight
kg (lbs.)
Min.
Order
UPC
051138-
PEAK Pressure Wrap Kit
148
PEAK-PWK-A
2B2A
2C2A
2D2A
152 (6.0)
178 (7.0)
216 (8.5)
483 (19.0)
483 (19.0)
483 (19.0)
900
1500
2400
5400
8450
10800
1.4 (3)
1 kit
78027
PEAK-PWK-B
2B2B
2C2B
2D2B
152 (6.0)
178 (7.0)
216 (8.5)
699 (27.5)
699 (27.5)
699 (27.5)
1500
2100
2700
6650
12000
15600
1.8 (4)
1 kit
78029
PEAK-PWK- C
2B2C
2C2C
2D2C
152 (6.0)
178 (7.0)
216 (8.5)
914 (36.0)
914 (36.0)
914 (36.0)
1800
2400
3000
9000
15600
21600
2.3 (5)
1 kit
78030
Ordering Information for 3M™ PEAK System –
Re-entry Kits, Accessories and Replacement Parts for the PEAK System
Product
Number
Endplate
Diameter
2-Type Cover
Assembly Kit
mm (in.)
Number of
Cable
Openings
Max. Diameter
Ea. Cable Opening
mm (in.)
Approx.
Weight
kg (lbs.)
Min.
Order
UPC
051138-
PEAK Endplate Kits
PEAK-A1E
134 (5.25)
2A2 Series
1
56 (2.2)
1.4 (3)
1 kit
78019
PEAK-B1E
178 (7.0)
2B2 Series
1
81 (3.2)
1.8 (4)
1 kit
78020
PEAK-B2E
178 (7.0)
2B2 Series
2
56 (2.2) 56 (2.2)
2.7 (6)
1 kit
78021
PEAK-C1E
203 (8.0)
2C2 Series
1
81 (3.2)
2.3 (5)
1 kit
78022
PEAK-D1E
241 (9.5)
2D2 Series
1
81 (3.2)
2.3 (5)
1 kit
78023
PEAK-D2E
241 (9.5)
2D2 Series
2
81 (3.2) 81 (3.2)
3.6 (8)
1 kit
78024
PEAK-D3E
241 (9.5)
2D2 Series
3
81 (3.2) 56 (2.2) 56 (2.2)
3.6 (8)
1 kit
78025
A complete PEAK pressure wrap system requires:
One (1) PEAK pressure wrap kit, one (1) 2-type cover assembly and two (2) PEAK endplate assembly kits.
Standard package = Kit. Minimum Order/Ordering Multiple = 1 Kit.
Product
Number
2-Type
Cover
Assembly
Sheath
Opening
mm (in.)
Encapsulant
Requirements*
grams
Approx.
Weight
kg (lbs.)
Min.
Order
UPC
051138-
PEAK Re-entry Kits
PEAK-RK-A
2B2A
2C2A
2D2A
483 (19.0)
483 (19.0)
483 (19.0)
5400
8450
10800
1.8 (4 )
1 kit
78031
PEAK-RK-B
2B2B
2C2B
2D2B
699 (27.5)
699 (27.5)
699 (27.5)
6650
12000
15600
2.3 (5 )
1 kit
78033
PEAK-RK-C
2B2C
2C2C
2D2C
914 (36.0)
914 (36.0)
914 (36.0)
9000
15600
21600
2.3 (5 )
1 kit
78034
One (1) each PEAK re-entry kit is required for each closure reentry. Standard package = Kit. Minimum Order/Ordering Multiple = 1 Kit.
NOTE: 1. AAAA, AAA, AA, A = 1 roll required - B, C = 2 rolls required.
2. *PEAK Pressure Wrap Kit does not include encapsulant or Pressure Wrap Tape. Encapsulant requirements will vary due
to connector type and splicing method used.
Ordering Information for 3M™ PEAK System Accessories
Product
Number
Descriptions/Dimensions
mm (in.)
Min. Order/
Quantity
Weight per Min. Order
kg (lbs.)
UPC
051138-
PEAK Accessories
PWK-BB-14
Bond Bar- 355.0 (14.0)
1
0.2 (0.43)
78751
PWK-BB-23
Bond Bar- 584.0 (23.0)
1
0.2 (0.44)
78037
PWK-BB-32
Bond Bar- 812.0 (32.0)
1
0.3 (0.61)
78038
PWK-BB-40
Bond Bar- 1,016 (40.0)
1
0.4 (0.88)
78039
Pressure Wrap Tape
1
0.3 (0.77)
78040
72-inch roll
1 pkg of 20 Rolls
7.3 (16)
78036
PWK-PWT-100
PEAK Tape
PWK-127T-72
PWK-127T-72 – Sealing tape used to seal liner against endplate flange adapter.
NOTE:AAAA, AAA, AA, A = 1 roll required - B, C = 2 rolls required.
149
3M™ 2-Type Pressurized Closures
Closure Selection Guide
To order 2-Type Pressurized Closures, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
A complete pressure
tight re-enterable closure
system for enclosing
spliced connections of
communications cables
in a wide variety of
applications.
The 2-type Closure is available in a
wide variety of closure lengths and
diameters. Lengths range from 470
mm (18-1/2") to over 2096 mm
(82-1/2") and closure diameters range
from 77 mm (3") to 305 mm (12").
The 2-type kit comes complete with all
the components needed to install the
cover and end plates. The only tool
required for installation is a washer
cutter tool.
Each complete 2-Type Cover Kit
Selection Contains:
• Cover assembly with channel
bars and bolts
• Transparent splice wrap with
cable ties
• Cover sealing R-Type re-enterable
sealing tape
• Endplate sealing R-Type
re-enterable sealing tape
• Solvent cleaning wipe and
plastic gloves
• Back cover support clips with
cable ties
• Pressurization valve
• Internal shield continuity braid
with insulation
• External grounding ribbon
• Vented and solid continuity and
ground connectors with hex nuts
• Assembly Instructions
150
220
Each complete 2-Type Endplate Kit
Selection Contains:
• Endplate assembly with sheath
grip clamps
• Cable collar build-up R-Type
re-enterable sealing tape material
• Endplate mid-section sealing
R-Type re-enterable sealing tape
• Solvent cleaning wipe and
plastic gloves
• Cable diameter measuring tape
• Shield connector
• Cable sheath scuff
• Hose clamps for securing sheath
grip clamps to cable
• Additional sheath grip clamps
• Universal slotted washers for
sealing cable entrances
• Assembly Instructions
3M™ 710 Modules
3M™ MS2™ Modules
Tapes
Splicing Rigs & Tools
pg. 22
pg. 6
pg. 189
pg. 12
151
Ordering Information for 3M™ 2-Type 2A2 Standard Closures (5-1/4" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
400
1
5.0 (11)
1
77133
Cover Halves Assembly Selection
2A2AA-510
134 (5.25)
470 (18.5)
254 (10.0)
2A2A-510
134 (5.25)
699 (27.5)
483 (19.0)
600
2
6.8 (15)
1
77126
2A2B-510
134 (5.25)
914 (36.0)
699 (27.5)
Custom
3
8.6 (19)
1
77137
2A2C-510
134 (5.25)
1130 (44.5)
914 (36.0)
Custom
4
10 (22)
1
77138
2A2F-510
134 (5.25)
1448 (57.0)
1232 (48.5)
Custom
–
14 (31)
1
77139
2A2H-510
134 (5.25)
1664 (65.5)
1448 (57.0)
Custom
–
16 (35)
1
77003
2A2K-510
134 (5.25)
1994 (78.5)
1778 (70.0)
Custom
–
18 (39)
1
77004
Ordering Information for 3M™ 2-Type 2A2 Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
56 (2.2)
1.4 (3)
1
77108
1.4 (3)
1
77113
28 (1.1) up to 33 (1.3)
1.4 (3)
1
77144
Endplate Selection
2A2-1E-510
134 (5.25)
1
2A2-2E-510
134 (5.25)
2
41 (1.6)
33 (1.3)
Grommet Selection
2A4-6E-130
134 (5.25)
6
2A4-6S-130
134 (5.25)
6
28 (1.1) up to 33 (1.3)
0.9 (2)
1
77145
2A4-9E
134 (5.25)
9
22 (0.88) up to 28 (1.1)
1.4 (3)
1
77146
2A4-9S
134 (5.25)
9
22 (0.88) up to 28 (1.1)
1.4 (3)
1
77147
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1.
2.
3.
4.
Custom cover lengths are available on a special order basis.
Custom grommet hole configurations are available on a special order basis.
Bonding hardware included with solid grommets only.
Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
Ordering Information for 3M™ 2-Type 2A2 Standard Closure Kits (cover and endplates in kit)
Product Description
UPC
2A2A-2-510
Product Name
1 cable in, 1 cable out
051138-78787
2A2A-3-510
1 cable in, 2 cables out
051138-78788
Note: To determine maximum cable diameter, refer to the endplate selection chart on page 97. 1 cable = 1E, 2 cables = 2E, 3 cables = 3E.
152
Ordering Information for 3M™ 2-Type 2B2 Standard Closures (7" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
6 (13)
1
77206
Cover Halves Assembly Selection
2B2AA-510
178 (7.0)
470 (18.5)
254 (10.0)
600
1
2B2A-510
178 (7.0)
699 (27.5)
483 (19.0)
1200
2
8 (17)
1
77197
2B2B-510
178 (7.0)
914 (36.0)
699 (27.5)
2100
3
10 (22)
1
77213
2B2C-510
178 (7.0)
1130 (44.0)
914 (36.0)
2700
4
12 (27)
1
77218
2B2D-510
178 (7.0)
1232 (48.5)
1016 (40.0)
Custom
–
14 (31)
1
77014
2B2E-510
178 (7.0)
1340 (52.8)
1124 (44.3)
Custom
–
15 (33)
1
77015
2B2F-510
178 (7.0)
1448 (57)
1232 (48.5)
Custom
–
16 (36)
1
77221
2B2I-510
178 (7.0)
1772 (69.75)
1556 (61.25)
Custom
–
20 (44)
1
77016
2B2J-510
178 (7.0)
1880 (74.0)
1664 (65.5)
Custom
–
21 (46)
1
77222
2B2K-510
178 (7.0)
1994 (78.5)
1778 (70.0)
Custom
–
22 (49)
1
77017
Ordering Information for 3M™ 2-Type 2B2 Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
86 (3.4)
1.8 (4)
1
77158
2.3 (5)
1
77168
Endplate Selection
2B2-1E-510
178 (7.0)
1
2B2-2E-510
178 (7.0)
2
2B2-3E-510
178 (7.0)
3
56 (2.2) 25 (1.0) 25 (1.0)
2.3 (5)
1
77180
56 (2.2)
56 (2.2)
Grommet Selection
2B4-9E-130
178 (7.0)
9
28 (1.1) up to 33 (1.3)
2.3 (5)
1
77232
2B4-9S-130
178 (7.0)
9
28 (1.1) up to 33 (1.3)
1.8 (4)
1
77233
2B4-12E
178 (7.0)
12
22 (0.88) up to 28 (1.1)
2.3 (5)
1
77223
2B4-12S
178 (7.0)
12
22 (0.88) up to 28 (1.1)
2.3 (5)
1
77224
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1.
2.
3.
4.
Custom cover lengths are available on a special order basis.
Custom grommet hole configurations are available on a special order basis.
Bonding hardware included with solid grommets only.
Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
Ordering Information for 3M™ 2-Type 2B2 Standard Closure Kits (cover and endplates in kit)
Product Description
UPC
2B2A-2-510
Product Name
1 cable in, 1 cable out
051138-78791
2B2A-3-510
1 cable in, 2 cables out
051138-77193
2B2A-4-510
1 cable in, 3 cables out
051138-78792
2B2A-5-510
2 cables in, 3 cables out
051138-78793
Note: To determine maximum cable diameter, refer to the endplate selection chart on page 97. 1 cable = 1E, 2 cables = 2E, 3 cables = 3E.
153
Ordering Information for 3M™ 2-Type 2C2 Standard Closures (8" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
699 (27.5)
483 (19.0)
1800
2
8.6 (19)
1
77276
Cover Halves Assembly Selection
2C2A-510
203 (8.0)
2C2B-510
203 (8.0)
914 (36.0)
699 (27.5)
3600
3
11 (25)
1
77287
2C2C-510
203 (8.0)
1130 (44.5)
914 (36.0)
4200
4
14 (30)
1
77293
2C2D-510
203 (8.0)
1232 (48.5)
1016 (40.0)
Custom
–
17 (37)
1
77296
2C2E-510
203 (8.0)
1340 (52.75)
1124 (44.25)
Custom
–
18 (39)
1
77297
2C2F-510
203 (8.0)
1448 (57.0)
1232 (48.5)
Custom
–
19 (41)
1
77298
2C2G-510
203 (8.0)
1563 (61.5)
1346 (53.0)
Custom
–
21 (46)
1
77299
2C2H-510
203 (8.0)
1664 (65.5)
1448 (57.0)
Custom
–
21 (47)
1
77300
2C2I-510
203 (8.0)
1772 (69.75)
1556 (61.25)
Custom
–
23 (50)
1
78632
2C2J-510
203 (8.0)
1880 (74.0)
1664 (65.5)
Custom
–
24 (52)
1
77301
2C2K-510
203 (8.0)
1994 (78.5)
1778 (70.0)
Custom
–
25 (55)
1
78633
2C2L-510
203 (8.0)
2096 (82.5)
1880 (74.0)
Custom
–
26 (57)
1
77302
2C2AA-510
203 (8.0)
470 (18.5)
254 (10.0)
Custom
1
6.8 (15)
1
77532
Ordering Information for 3M™ 2-Type 2C2 Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
86 (3.4)
1.8 (4)
1
77244
Endplate Selection
2C2-1E-510
203 (8.0)
1
2C2-2E-510
203 (8.0)
2
2.7 (6)
1
77251
2C2-3E-510
203 (8.0)
3
71 (2.8) 41 (1.6) 41 (1.6)
2.7 (6)
1
77258
12
28 (1.1) up to 33 (1.3)
2.7 (6)
1
77303
71 (2.8)
71 (2.8)
Grommet Selection
2C4-12E-130
203 (8.0)
2C4-12S-130
203 (8.0)
12
28 (1.1) up to 33 (1.3)
2.7 (6)
1
77304
2C4-18E
203 (8.0)
18
22 (0.88) up to 28 (1.1)
2.7 (6)
1
77305
2C4-18S
203 (8.0)
18
22 (0.88) up to 28 (1.1)
2.7 (6)
1
77306
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1.
2.
3.
4.
Custom cover lengths are available on a special order basis.
Custom grommet hole configurations are available on a special order basis.
Bonding hardware included with solid grommets only.
Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
Ordering Information for 3M™ 2-Type 2C2 Standard Closure Kits (cover and endplates in kit)
Product Description
UPC
2C2A-2-510
Product Name
1 cable in, 1 cable out
051138-78628
2C2A-3-510
1 cable in, 2 cables out
051138-78629
2C2A-4-510
1 cable in, 3 cables out
051138-78630
2C2A-5-510
2 cables in, 3 cables out
051138-78798
Note: To determine maximum cable diameter, refer to the endplate selection chart on page 97. 1 cable = 1E, 2 cables = 2E, 3 cables = 3E.
154
Ordering Information for 3M™ 2-Type 2D2 Standard Closures and Kits (9-1/2" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Cover Halves Assembly Selection
2D2AA-510
241 (9.5)
470 (18.5)
254 (10.0)
Custom
1
8.2 (18)
1
77362
2D2A-510
241 (9.5)
699 (27.5)
483 (19.0)
3300
2
10 (22)
1
77358
2D2B-510
241 (9.5)
914 (36.0)
699 (27.5)
4200
3
13 (29)
1
77365
2D2C-510
241 (9.5)
1130 (44.5)
914 (36.0)
4800
4
16 (35)
1
77370
2D2D-510
241 (9.5)
1232 (48.5)
1016 (40.0)
Custom
–
18 (40)
1
77373
2D2E-510
241 (9.5)
1340 (52.75)
1124 (44.25)
Custom
–
20 (43)
1
77374
2D2F-510
241 (9.5)
1448 (57.0)
1232 (48.5)
Custom
–
21 (46)
1
77375
2D2G-510
241 (9.5)
1563 (61.5)
1346 (53.0)
Custom
–
23 (50)
1
77376
2D2H-510
241 (9.5)
1664 (65.5)
1448 (57.0)
Custom
–
24 (53)
1
77377
2D2I-510
241 (9.5)
1772 (69.75)
1556 (61.25)
Custom
–
25 (56)
1
77378
2D2J-510
241 (9.5)
1880 (74.0)
1664 (65.5)
Custom
–
27 (59)
1
77379
2D2K-510
241 (9.5)
1994 (78.5)
1778 (70.0)
Custom
–
28 (62)
1
77380
2D2L-510
241 (9.5)
2096 (82.5)
1880 (74.0)
Custom
–
29 (64)
1
77381
Min.
Order
(each)
UPC
051138-
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Endplate Selection
2D2-1E-510
241 (9.5)
1
2D2-2E-510
241 (9.5)
2
2D2-3E-510
241 (9.5)
3
86 (3.4)
2.3 (5)
1
77323
3.2 (7)
1
77330
86 (3.4) 56 (2.2) 56 (2.2)
3.2 (7)
1
77339
86 (3.4)
86 (3.4)
Grommet Selection
2D4-18E
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77383
2D4-18S
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77385
2D4-18E-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.6 (8)
1
77384
2D4-18S-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.2 (7)
1
77386
2D4-27E
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77389
2D4-27S
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77390
2D4-36E
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77394
2D4-36S
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77395
2D4-42E
241 (9.5)
42
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77398
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1.
2.
3.
4.
Custom cover lengths are available on a special order basis.
Custom grommet hole configurations are available on a special order basis.
Bonding hardware included with solid grommets only.
Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
Ordering Information for 3M™ 2-Type 2D2 Standard Closure Kits
Product Name
(cover and endplates in kit)
Product Description
UPC
2D2A-2-510
1 cable in, 1 cable out
051138-78635
2D2A-3-510
1 cable in, 2 cables out
051138-78636
2D2A-4-510
1 cable in, 3 cables out
051138-78637
2D2A-5-510
2 cables in, 3 cables out
051138-78803
2D2A-6-510
3 cables in, 3 cables out
051138-78639
Note: To determine maximum cable diameter, refer to the endplate selection chart on page 97. 1 cable = 1E, 2 cables = 2E, 3 cables = 3E.
155
Ordering Information for 3M™ 2-Type 2E2-DD Standard Closures (12" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
483 (19.0)
3300
2
12 (26)
1
77412
Cover Halves Assembly Selection
2E2A-DD-510
305 (12.0)
699 (27.5)
2E2B-DD-510
305 (12.0)
914 (36.0)
699 (27.5)
4200
3
16 (34)
1
77422
2E2C-DD-510
305 (12.0)
1130 (44.5)
914 (36.0)
Custom
4
20 (43)
1
77433
2E2D-DD-510
305 (12.0)
1232 (48.5)
1016 (40.0)
Custom
–
21 (47)
1
77436
2E2E-DD-510
305 (12.0)
1340 (52.75)
1124 (44.25)
Custom
–
23 (50)
1
77439
2E2F-DD-510
305 (12.0)
1448 (57.0)
1232 (48.5)
Custom
–
25 (54)
1
77442
2E2G-DD-510
305 (12.0)
1563 (61.5)
1346 (53.0)
Custom
–
27 (59)
1
77444
2E2H-DD-510
305 (12.0)
1664 (65.5)
1448 (57.0)
Custom
–
28 (62)
1
77446
2E2I-DD-510
305 (12.0)
1772 (69.75)
1556 (61.25)
Custom
–
30 (65)
1
78643
2E2J-DD-510
305 (12.0)
1880 (74.0)
1664 (65.5)
Custom
–
31 (69)
1
77450
2E2K-DD-510
305 (12.0)
1994 (78.5)
1778 (70.0)
Custom
–
32 (71)
1
77452
2E2L-DD-510
305 (12.0)
2096 (82.5)
1880 (74.0)
Custom
–
34 (74)
1
77454
Min.
Order
(each)
UPC
051138-
Ordering Information for 3M™ 2-Type 2E2-DD Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Endplate Selection
2D2-1E-510
241 (9.5)
1
2D2-2E-510
241 (9.5)
2
2D2-3E-510
241 (9.5)
3
86 (3.4)
2.3 (5)
1
77323
3.2 (7)
1
77330
86 (3.4) 56 (2.2) 56 (2.2)
3.2 (7)
1
77339
86 (3.4)
86 (3.4)
Grommet Selection
2D4-18E
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77383
2D4-18S
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77385
2D4-18E-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.6 (8)
1
77384
2D4-18S-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.2 (7)
1
77386
2D4-27E
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77389
2D4-27S
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77390
2D4-36E
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77394
2D4-36S
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77395
2D4-42E
241 (9.5)
42
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77398
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1.
2.
3.
4.
Custom cover lengths are available on a special order basis.
Custom grommet hole configurations are available on a special order basis.
Bonding hardware included with solid grommets only.
Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
5. Two D diameter endplate or grommet kits must be ordered with 2E2-DD cover kit.
156
Ordering Information for 3M™ 2-Type 2E2-EE Standard Closures (12" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
483 (19.0)
3300
2
12 (26)
1
77419
Cover Halves Assembly Selection
2E2A-EE-510
305 (12.0)
699 (27.5)
2E2B-EE-510
305 (12.0)
914 (36.0)
699 (27.5)
4200
3
16 (34)
1
77431
2E2C-EE-510
305 (12.0)
1130 (44.5)
914 (36.0)
Custom
4
20 (43)
1
77435
2E2D-EE-510
305 (12.0)
1232 (48.5)
1016 (40.0)
Custom
–
21 (47)
1
77438
2E2E-EE-510
305 (12.0)
1340 (52.75)
1124 (44.25)
Custom
–
23 (50)
1
77441
2E2F-EE-510
305 (12.0)
1448 (57.0)
1232 (48.5)
Custom
–
25 (54)
1
77443
2E2G-EE-510
305 (12.0)
1563 (61.5)
1346 (53.0)
Custom
–
27 (59)
1
77445
2E2H-EE-510
305 (12.0)
1664 (65.5)
1448 (57.0)
Custom
–
28 (62)
1
77447
2E2I-EE-510
305 (12.0)
1772 (69.75)
1556 (61.25)
Custom
–
30 (65)
1
77449
2E2J-EE-510
305 (12.0)
1880 (74.0)
1664 (65.5)
Custom
–
31 (69)
1
77451
2E2K-EE-510
305 (12.0)
1994 (78.5)
1778 (70.0)
Custom
–
32 (71)
1
77453
2E2L-EE-510
305 (12.0)
2096 (82.5)
1880 (74.0)
Custom
–
34 (74)
1
77456
Ordering Information for 3M™ 2-Type 2E2-EE Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Endplate Selection
2E2-2E-510
305
3
102 (4.0) 86 (3.4) 86 (3.4)
4.1 (9)
1
77409
2D2-3E-510
241 (9.5)
3
86 (3.4) 56 (2.2) 56 (2.2)
3.2 (7)
1
77339
Grommet Selection
2E4-27E
305 (12.0)
27
22 (0.88) up to 28 (1.1)
5.9 (13)
1
77457
2E4-27S
305 (12.0)
27
22 (0.88) up to 28 (1.1)
5.9 (13)
1
77458
2E4-27E-130
305 (12.0)
27
28 (1.1) up to 33 (1.3)
5.5 (12)
1
78645
2E4-27S-130
305 (12.0)
27
28 (1.1) up to 33 (1.3)
5.0 (11)
1
77459
2E4-36E
305 (12.0)
36
22 (0.88) up to 28 (1.1)
5.9 (13)
1
77462
2E4-36S
305 (12.0)
36
22 (0.88) up to 28 (1.1)
5.5 (12)
1
77463
2E4-42E
305 (12.0)
42
22 (0.88) up to 28 (1.1)
5.9 (13)
1
77466
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1.
2.
3.
4.
Custom cover lengths are available on a special order basis.
Custom grommet hole configurations are available on a special order basis.
Bonding hardware included with solid grommets only.
Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
157
Ordering Information for 3M™ 2-Type 2E2-DE Standard Closures (12" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
483 (19.0)
4200
2
12 (26)
1
77416
Cover Halves Assembly Selection
2E2A-DE-510
305 (12.0)
699 (27.5)
2E2B-DE-510
305 (12.0)
914 (36.0)
699 (27.5)
4800
3
16 (34)
1
77428
2E2C-DE-510
305 (12.0)
1130 (44.5)
914 (36.0)
Custom
4
20 (43)
1
77434
2E2D-DE-510
305 (12.0)
1232 (48.5)
1016 (40.0)
Custom
–
21 (47)
1
77437
2E2E-DE-510
305 (12.0)
1340 (52.75)
1124 (44.25)
Custom
–
23 (50)
1
77440
2E2F-DE-510
305 (12.0)
1348 (57.0)
1232 (48.5)
Custom
–
25 (54)
1
77040
2E2G-DE-510
305 (12.0)
1563 (61.5)
1346 (53.0)
Custom
–
27 (59)
1
86783
2E2H-DE-510
305 (12.0)
1664 (65.5)
1448 (57.0)
Custom
–
28 (62)
1
78642
2E2I-DE-510
305 (12.0)
1772 (69.75)
1556 (61.25)
Custom
–
30 (65)
1
77448
2E2J-DE-510
305 (12.0)
1880 (74.0)
1664 (65.5)
Custom
–
31 (69)
1
78559
2E2K-DE-510
305 (12.0)
1994 (78.5)
1778 (70.0)
Custom
–
32 (71)
1
77612
2E2L-DE-510
305 (12.0)
2096 (82.5)
1880 (74.0)
Custom
–
34 (74)
1
77455
Note: One end is 229 mm (9"), one end is 305 mm (12").
Ordering Information for 3M™ 2-Type 2E2-DE Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
86 (3.4)
2.3 (5)
1
77323
3.2 (7)
1
77330
Endplate Selection*
2D2-1E-510
241 (9.5)
1
2D2-2E-510
241 (9.5)
2
2D2-3E-510
241 (9.5)
3
2E2-2E-510
305 (12.0)
2
2E2-3E-510
305 (12.0)
3
86 (3.4)
86 (3.4)
86 (3.4) 56 (2.2) 56 (2.2)
3.2 (7)
1
77339
4.1 (9)
1
77405
102 (4.0) 86 (3.4) 86 (3.4)
4.1 (9)
1
77409
112 (4.4)
112 (4.4)
Grommet Selection
2D4-18E
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77383
2D4-18S
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77385
2D4-18E-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.6 (8)
1
77384
2D4-18S-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.2 (7)
1
77386
2D4-27E
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77389
2D4-27S
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77390
2D4-36E
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77394
2D4-36S
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77395
2D4-42E
241 (9.5)
42
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77398
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1.
2.
3.
4.
158
Custom cover lengths are available on a special order basis.
Custom grommet hole configurations are available on a special order basis.
Bonding hardware included with solid grommets only.
Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
Ordering Information for 3M™ 2-Type 2X2 Standard Closures (4" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Cover Halves Assembly Selection
2X2AA-510
102 (4.0)
470 (18.5)
254 (10.0)
100
1
4.8 (11)
1
77476
2X2A-510
102 (4.0)
699 (27.5)
483 (19.0)
Custom
2
7.3 (16)
1
77042
2X2B-510
102 (4.0)
914 (36.0)
699 (27.5)
Custom
3
8.6 (19)
1
77043
Ordering Information for 3M™ 2-Type 2X2 Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
0.9 (2)
1
77475
Endplate Selection
2X2-2E-510
102 (4.0)
2
25 (1.0)
25 (1.0)
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits.
NOTE: 1. Custom cover lengths are available on a special order basis.
2. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
Ordering Information for 3M™ 2-Type 2Y2 Standard Closures (3" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Cover Halves Assembly Selection
2Y2AA-510
77 (3.0)
470 (18.5)
254 (10.0)
100
1
5.0 (11)
1
77484
2Y2A-510
77 (3.0)
699 (27.5)
483 (19.0)
Custom
2
7.3 (16)
1
77482
Ordering Information for 3M™ 2-Type 2Y2 Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
0.9 (2)
1
77481
Endplate Selection
2Y2-2E-510
77 (3.0)
2
25 (1.0)
25 (1.0)
A complete 2-Type Closure System requires:
1 cover assembly kit and 2 endplate kits.
NOTE: 1. Custom cover lengths are available on a special order basis.
2. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
159
3M™ 4-Type Fire Retardant Closures
Closure Selection Guide
To order 4-Type Fire Retardant Closures, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
4-Type Closures that can
really take the heat.
The 2-Type Fire Retardant Closure is
completely self-contained and capable
of withstanding a 15 minute horizontal
or vertical burn test. In addition, the
Fire Retardant Vault/Building Closure
System meets all the performance
criteria of the standard 2-Type Closure
series so you can use the same tools
and installation procedures.
The system has an Oxygen Index of
28% minimum and a UL 94 rating
exceeding V.O. The closure self
extinguishes when the fuel source is
removed.
The Fire Retardant Closure can be
used for new construction or for
retrofitting: cable for entrance
facilities, vault or central office,
building riser cables or building
distribution cables.
221
Ordering Information for 3M™ 4-Type 2A4 Fire Retardant Closures (5-1/4" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Cover Halves Assembly Selection
2A4AA-510
134 (5.25)
470 (18.5)
254 (10.0)
400
1
5.5 (12)
1
77151
2A4A-510
134 (5.25)
699 (27.5)
483 (19.0)
600
2
7.7 (17)
1
77149
Ordering Information for 3M™ 4-Type 2A4 Standard Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
56 (2.2)
1.4 (3)
1
77141
1.4 (3)
1
77143
Endplate Selection
2A4-1E-510
134 (5.25)
1
2A4-2E-510
134 (5.25)
2
41 (1.6)
33 (1.3)
Grommet Selection
2A4-6E-130
134 (5.25)
6
28 (1.1) up to 33 (1.3)
1.4 (3)
1
77144
2A4-6S-130
134 (5.25)
6
28 (1.1) up to 33 (1.3)
1.4 (3)
1
77145
2A4-9E
134 (5.25)
9
22 (0.88) up to 28 (1.1)
1.4 (3)
1
77146
2A4-9S
134 (5.25)
9
22 (0.88) up to 28 (1.1)
1.4 (3)
1
77147
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
160
NOTE: 1. Custom grommet hole configurations are available on a special order basis. “E” designates solid endplate for new construction
and “S” designates split endplate for existing or retrofit applications.
2. Bonding hardware included with solid grommets only.
3. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
Ordering Information for 3M™ 4-Type 2B4 Fire Retardant Closures (7" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
1
77235
Cover Halves Assembly Selection
2B4AA-510
178 (7.0)
470 (18.5)
254 (10.0)
600
1
7.3 (16)
2B4A-510
178 (7.0)
699 (27.5)
483 (19.0)
1200
2
9.6 (21)
1
77234
2B4B-510
178 (7.0)
914 (36.0)
699 (27.5)
2100
3
13 (29)
1
77236
2B4C-510
178 (7.0)
1130 (44.5)
914 (36.0)
2700
4
16 (35)
1
77237
Ordering Information for 3M™ 4-Type 2B4 Fire Retardant Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
86 (3.4)
2.3 (5)
1
77227
2.7 (6)
1
77229
Endplate Selection
2B4-1E-510
178 (7.0)
1
2B4-2E-510
178 (7.0)
2
2B4-3E-510
178 (7.0)
3
56 (2.2) 25 (1.0) 25 (1.0)
2.3 (5)
1
77231
56 (2.2)
56 (2.2)
Grommet Selection
2B4-9E-130
178 (7.0)
9
28 (1.1) up to 33 (1.3)
2.3 (5)
1
77232
2B4-9S-130
178 (7.0)
9
28 (1.1) up to 33 (1.3)
2.3 (5)
1
77233
2B4-12E
178 (7.0)
12
22 (0.88) up to 28 (1.1)
2.3 (5)
1
77223
2B4-12S
178 (7.0)
12
22 (0.88) up to 28 (1.1)
2.3 (5)
1
77224
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1. Custom grommet hole configurations are available on a special order basis. “E” designates solid endplate for new construction
and “S” designates split endplate for existing or retrofit applications.
2. Bonding hardware included with solid grommets only.
3. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
161
Ordering Information for 3M™ 4-Type 2C4 Fire Retardant Closures (8" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
699 (27.5)
483 (19.0)
1800
2
12 (26)
1
77314
Cover Halves Assembly Selection
2C4A-510
203 (8.0)
2C4B-510
203 (8.0)
914 (36.0)
699 (27.5)
3600
3
16 (34)
1
77315
2C4C-510
203 (8.0)
1130 (44.5)
914 (36.0)
4200
4
19 (41)
1
77316
Ordering Information for 3M™ 4-Type 2C4 Fire Retardant Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
86 (3.4)
2.3 (5)
1
77309
Endplate Selection
2C4-1E-510
203 (8.0)
1
2C4-2E-510
203 (8.0)
2
3.2 (7)
1
77311
2C4-3E-510
203 (8.0)
3
71 (2.8) 41 (1.6) 41 (1.6)
3.2 (7)
1
77313
12
28 (1.1) up to 33 (1.3)
2.7 (6)
1
77303
77304
71 (2.8)
71 (2.8)
Grommet Selection
2C4-12E-130
203 (8.0)
2C4-12S-130
203 (8.0)
12
28 (1.1) up to 33 (1.3)
2.7 (6)
1
2C4-12S
203 (8.0)
12
22 (0.88) up to 28 (1.1)
2.7 (6)
1
2C4-18E
203 (8.0)
18
22 (0.88) up to 28 (1.1)
2.7 (6)
1
77305
2C4-18S
203 (8.0)
18
22 (0.88) up to 28 (1.1)
2.7 (6)
1
77306
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1. Custom grommet hole configurations are available on a special order basis. “E” designates solid endplate for new construction
and “S” designates split endplate for existing or retrofit applications.
2. Bonding hardware included with solid grommets only.
3. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
162
Ordering Information for 3M™ 4-Type 2D4 Fire Retardant Closures (9-1/2" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
699 (27.5)
483 (19.0)
3300
2
14 (30)
1
77400
Cover Halves Assembly Selection
2D4A-510
241 (9.5)
2D4B-510
241 (9.5)
914 (36.0)
699 (27.5)
4200
3
17 (38)
1
77401
2D4C-510
241 (9.5)
1130 (44.5)
914 (36.0)
4800
4
22 (47)
1
77402
Ordering Information for 3M™ 4-Type 2D4 Fire Retardant Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
86 (3.4)
2.7 (6)
1
77388
Endplate Selection
2D4-1E-510
241 (9.5)
1
2D4-2E-510
241 (9.5)
2
3.6 (8)
1
77393
2D4-3E-510
241 (9.5)
3
86 (3.4) 56 (2.2) 56 (2.2)
3.6 (8)
1
77397
86 (3.4)
86 (3.4)
Grommet Selection
2D4-18E
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77383
2D4-18S
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77385
2D4-18E-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.6 (8)
1
77384
2D4-18S-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.2 (7)
1
77386
2D4-27E
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77389
2D4-27S
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77390
2D4-36E
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77394
2D4-36S
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77395
2D4-42E
241 (9.5)
42
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77398
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1. Custom grommet hole configurations are available on a special order basis. “E” designates solid endplate for new construction
and “S” designates split endplate for existing or retrofit applications.
2. Bonding hardware included with solid grommets only.
3. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
163
Ordering Information for 3M™ 4-Type 2E4-DD Fire Retardant Closures (12" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Cover Halves Assembly Selection
2E4A-DD-510
305 (12.0)
699 (27.5)
483 (19.0)
3300
2
16 (34)
1
77468
2E4B-DD-510
305 (12.0)
914 (36.0)
699 (27.5)
4200
3
21 (45)
1
77471
Ordering Information for 3M™ 4-Type 2E4-DD Fire Retardant Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
86 (3.4)
2.7 (6)
1
77388
Endplate Selection
2D4-1E-510
241 (9.5)
1
2D4-2E-510
241 (9.5)
2
3.6 (8)
1
77393
2D4-3E-510
241 (9.5)
3
86 (3.4) 56 (2.2) 56 (2.2)
3.6 (8)
1
77397
86 (3.4)
86 (3.4)
Grommet Selection
2D4-18E
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77383
2D4-18S
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77385
2D4-18E-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.6 (8)
1
77384
2D4-18S-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.2 (7)
1
77386
2D4-27E
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77389
2D4-27S
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77390
2D4-36E
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77394
2D4-36S
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77395
2D4-42E
241 (9.5)
42
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77398
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1. Custom cover lengths are available on a special order basis.
2. Custom grommet hole configurations are available on a special order basis. “E” designates solid endplate for new construction
and “S” designates split endplate for existing or retrofit applications.
3. Bonding hardware included with solid grommets only.
4. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
164
Ordering Information for 3M™ 4-Type 2D4-EE Fire Retardant Closures (12" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Cover Halves Assembly Selection
2E4A-EE-510
305 (12.0)
699 (27.5)
483 (19.0)
4200
2
16 (34)
1
77470
2E4B-EE-510
305 (12.0)
914 (36.0)
699 (27.5)
4800
3
20 (44)
1
77473
Ordering Information for 3M™ 4-Type 2D4-EE Fire Retardant Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
4.5 (10)
1
77461
Endplate Selection
2E4-2E-510
305 (12)
2
112 (4.4)
112 (4.4)
2E4-3E-510
305 (12)
3
102 (4.0) 86 (3.4) 86 (3.4)
4.5 (10)
1
77465
Grommet Selection
2E4-27E
305 (12)
27
22 (0.88) up to 28 (1.1)
5.9 (13)
1
77457
2E4-27S
305 (12)
27
22 (0.88) up to 28 (1.1)
5.9 (13)
1
77458
2E4-27E-130
305 (12)
27
28 (1.1) up to 33 (1.3)
5.5 (12)
1
78645
2E4-27S-130
305 (12)
27
28 (1.1) up to 33 (1.3)
5.0 (11)
1
77459
2E4-36E
305 (12)
36
22 (0.88) up to 28 (1.1)
5.9 (13)
1
77462
2E4-36S
305 (12)
36
22 (0.88) up to 28 (1.1)
5.5 (12)
1
77463
2E4-42E
305 (12)
42
22 (0.88) up to 28 (1.1)
5.9 (13)
1
77466
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1. Custom cover lengths are available on a special order basis.
2. Custom grommet hole configurations are available on a special order basis. “E” designates solid endplate for new construction
and “S” designates split endplate for existing or retrofit applications.
3. Bonding hardware included with solid grommets only.
4. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
165
Ordering Information for 3M™ 4-Type 2E4-DE Fire Retardant Closures (12" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Cover Halves Assembly Selection
2E4A-DE-510
305 (12.0)
699 (27.5)
483 (19.0)
4200
2
16 (35)
1
77469
2E4B-DE-510
305 (12.0)
914 (36.0)
699 (27.5)
4800
3
21 (45)
1
77472
Ordering Information for 3M™ 4-Type 2E4-DE Fire Retardant Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
86 (3.4)
14 (30)
1
77388
Endplate Selection
2D4-1E-510
241 (9.5)
1
2D4-2E-510
241 (9.5)
2
17 (38)
1
77393
2D4-3E-510
241 (9.5)
3
86 (3.4) 56 (2.2) 56 (2.2)
22 (47)
1
77397
86 (3.4)
86 (3.4)
Grommet Selection
2D4-18E
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77383
2D4-18S
241 (9.5)
18
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77385
2D4-18E-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.6 (8)
1
77384
2D4-18S-130
241 (9.5)
18
28 (1.1) up to 33 (1.3)
3.2 (7)
1
77386
2D4-27E
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77389
2D4-27S
241 (9.5)
27
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77390
2D4-36E
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77394
2D4-36S
241 (9.5)
36
22 (0.88) up to 28 (1.1)
3.2 (7)
1
77395
2D4-42E
241 (9.5)
42
22 (0.88) up to 28 (1.1)
3.6 (8)
1
77398
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits or 1 cover assembly kit, 1 endplate kit and 1 grommet kit.
NOTE: 1. Custom cover lengths are available on a special order basis.
2. Custom grommet hole configurations are available on a special order basis. “E” designates solid endplate for new construction
and “S” designates split endplate for existing or retrofit applications.
3. Bonding hardware included with solid grommets only.
4. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
166
Ordering Information for 3M™ 4-Type 2X4 Fire Retardant Closures (4" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
254 (10.0)
100
1
5.9 (13)
1
77479
Cover Halves Assembly Selection
2X4AA-510
102 (4.0)
470 (18.5)
Ordering Information for 3M™ 4-Type 2X4 Fire Retardant Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
1.4 (3)
1
77478
Endplate Selection
2X4-2E-510
102 (4.0)
2
25 (1.0)
25 (1.0)
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits.
NOTE: 1. Custom cover lengths are available on a special order basis.
2. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
167
Ordering Information for 3M™ 4-Type 2Y4 Fire Retardant Closures (3" Diameter)
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max.
Number
Cable Pairs
Splice
Banks
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
254 (10.0)
100
1
5.9 (13)
1
77487
Cover Halves Assembly Selection
2Y4AA-510
77 (3.0)
470 (18.5)
Ordering Information for 3M™ 4-Type 2Y4 Fire Retardant Closure Kits
Product
Number
Endplate
Diameter
mm (in.)
Cable
Openings
mm (in.)
Max. Diameter
Each Cable Opening
mm (in.)
Pkg.
kg (lbs.)
Min.
Order
(each)
UPC
051138-
2
25 (1.0)
1.4 (3)
1
77486
Endplate Selection
2Y4-2E-510
77 (3.0)
A complete 4-Type Closure System requires:
1 cover assembly kit and 2 endplate kits.
NOTE: 1. Custom cover lengths are available on a special order basis.
2. Maximum number of cable pairs based on 0.51/0.40 mm (24/26") gauge cable using 25 pair modular connectors for straight,
in-line splice.
168
Accessories and Replacement Parts
for 3M™ 2-Type Closures and 3M™ 4-Type Fire
Retardant Closures
Ordering Information for 2-Type Closure and 4-Type Fire Retardant Vault Closure
Accessories and Replacement Parts
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
20 kits
3.2 (7)
78418
Aerial Hanger Kit
For supporting closure assembly to strand wire in aerial applications.
AH20K
Aerial Hanger Kit
2
Back Cover Clip Kit
For supporting backing cover to endplates during splicing. Also keeps endplates parallel and properly spaced.
BCC10K
BCC10-M100
A, B, C, X, Y and Z Covers
2 Clips w/Cable Ties
20 kits
0.9 (2)
77704
Kit in bulk (Cable Ties not Included)
100
1 pkg.
1.4 (3)
77707
Bolts
For replacing lost or damaged bolts in endplates and covers.
SB1875K
7.9 x 47.6 (5/16 x 1-7/8) - Short
25
4 pkgs.
2.7 (6)
78094
SB2375K
7.9 x 60.3 (5/16 x 2-3/8) - Long
25
4 pkgs.
3.2 (7)
78095
Solid, Vented Bond Conn. Kit
with hex nuts
1 Solid & 1 Vented
20 kits
0.9 (2)
77708
Solid Bond Connector
25
4 pkgs.
1.4 (3)
77702
Bond Connector Kit
For replacing lost or damaged bond connectors.
BCHN10K
BBC20K
Bonding Harness
For establishing shield continuity on tip cables inside vault closures. Standard packaging - 9 Wire Harnesses.
BH18K
Bonding Harness Kit (18-wire)
2
1 kit
0.3 (0.7)
77714
BH27K
Bonding Harness Kit (27-wire)
3
1 kit
0.4 (1)
77715
BH36K
Bonding Harness Kit (36-wire)
4
1 kit
0.9 (2)
77716
BH42K
Bonding Harness Kit (42-wire)
5
1 kit
0.9 (2)
77717
169
Ordering Information for 3M™ 2-Type Closure and 3M™ 4-Type Fire Retardant Vault Closure
Accessories and Replacement Parts
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
Channel Bars
For replacing lost or damaged channel bars in 2-Type and 4-Type cover halves. T = Threaded, U = Unthreaded.
CTB10K
2-Type Cover - T
699 (27.5)
6
1 kit
2.3 (5)
77753
CTB11K
2-Type Cover - T
914 (36.0)
6
1 kit
3.2 (7)
77756
CTB12K
2-Type Cover - T
1130 (44.5)
6
1 kit
4.1 (9)
77759
CUB11K
2-Type Cover - U
914 (36.0)
6
1 kit
3.2 (7)
77765
Channel Bar Inserts for 2-Type Closure
For replacing lost or damaged channel bar inserts.
CBN10K
Channel Bar Threaded Inserts
25
4 pkgs.
1.4 (3)
77728
CBW10K
Channel Bar Unthreaded Inserts
25
4 pkgs.
1.4 (3)
77735
1 pkg.
2.3 (5)
77749
Cleaning Wipes
For preparing plastic closure halves, endplates and cables before applying sealing tapes.
CSSC20-M100
Closure Sealing Surface Cleaner
100
Continuity/Grounding Pressurization Kit
For restoring continuity and external grounding of closure. Also used for flash testing and pressurization.
BG9K
470 (18.5) Length Cover (AA)
1
10 kits
2.7 (6)
77713
BG10K
699 (27.5) Length Cover (A)
1
10 kits
4.1 (9)
77711
BG12K
914 & 1130 (36 & 44.5)
Length Cover (B & C)
1
10 kits
5.0 (11)
77712
Endplate Inserts
For replacing lost or damaged endplate inserts.
SNI300K
Threaded Endplate Inserts
25
4 pkgs.
1.8 (4)
78112
SWI300K
Unthreaded Endplate Inserts
25
4 pkgs.
1.8 (4)
78120
Grommet Sealant and Tip Cable Insertion Shoe
Insertion shoe for easy insertion of tip cables into grommets and grommet sealant for sealing tip cables into grommet.
170
GSC10
3 oz. Tube of Sealant
1
10 each
1.8 (4)
77912
GCIS20
Tip Cable Insertion Shoe
1
1 each
0.23 (0.5)
77903
Ordering Information for 3M™ 2-Type Closure and 3M™ 4-Type Fire Retardant Vault Closure
Accessories and Replacement Parts
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
Jacking Plates
For replacing lost or damaged jacking plates.
CIT68K
Threaded Jacking Plate
25
4 pkgs.
1.4 (3)
77738
CIU68K
Unthreaded Jacking Plates
25
4 pkgs.
1.4 (3)
77739
10
10 pkgs.
2.3 (5)
77801
Pressure Valve Assembly
For replacing lost or damaged pressure valves.
FVA11K
Pressure Valve Assembly
RC Re-enterable Sealing Cord
For sealing the groove along the length of cover halves.
AA Length Cover = 1 roll RC45; A Length Cover = 1 roll RC62; B and C Length Covers = 1 roll RC96, Z-Closure - 1 roll RC36
RC45-8
–
1
96 rolls
10 (21)
78044
RC62-8
–
1
96 rolls
13 (29)
78045
RC96-8
–
1
96 rolls
21 (46)
78050
RTE Re-enterable Sealing Tape
For sealing between cover halves and endplates.
2Y2, 2X2 & 2A2 series = 1 roll RTE36 required for 2 each endplates; 2B2 series = 1 roll RTE46 required for 2 each endplates.
2C2 & 2D2 series = 1 roll RTE62 required for 2 each endplates; 2E2 series = 2 rolls RTE46 required for 2 each endplates.
RTE36-8
–
1
108 rolls
20 (43)
78071
RTE46-8
–
1
108 rolls
26 (58)
78073
RTE62-8
–
1
54 rolls
17 (38)
78075
RTW Re-enterable Sealing Tape
For sealing collar build-up around cable. Note: Usage will vary with cable diameter.
RTW36-8
–
1
60 rolls
12 (26)
78082
RTW72-8
–
1
60 rolls
21 (47)
78083
Shield Connector
For replacing lost or damaged shield connectors.
SC10K
BCP1-1, Size #1, up to
20 (0.8) Cable Dia.
25
4 pkgs.
1.8 (4)
78100
SC20K
BCP2-1, Size #2, 20 (0.8) to
41 (1.6) Cable Dia.
25
4 pkgs.
2.3 (5)
78101
SC30K
BCP3-1, Size #3, over
41 (1.6) Cable Dia.
25
4 pkgs.
2.3 (5)
78102
171
Ordering Information for 3M™ 2-Type Closure and 3M™ 4-Type Fire Retardant Vault Closure
Accessories and Replacement Parts
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
Splice Wrap Kit
For wrapping and protecting splice bundle and to keep wire out of the cover half sealing groove during assembly.
ASW9K
2Y2AA, 2X2AA & 2A2AA Closures
1
32 kits
3.6 (8)
78424
BSW10K
2A2A & 2B2A Closures
1
16 kits
5.0 (11)
77721
BSW11K
2B2B Closure
1
16 kits
7.3 (16)
77722
BSW12K
2B2C Closure
1
16 kits
10.4 (23)
77723
DSW10K
2C2A & 2D2A Closures
1
16 kits
6.8 (15)
77778
DSW11K
2C2B & 2D2B Closures
1
16 kits
9.1 (20)
77779
DSW12K
2C2C & 2D2C Closures
1
16 kits
11.3 (25)
77780
ESW10K
2E2A Closure
1
16 kits
8.2 (18)
77782
ESW11K
2E2B Closure
1
16 kits
11.3 (25)
77783
Step Washer
2
50 pkgs.
5.0 (11)
77997
Stepwasher
MK-K
Product
Number
Descriptions/
Dimensions
mm (in.)
Pin
Size
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
Tip Cable Opening Plugs
For plugging unused tip cable openings for endplate grommets.
GP88100
22 - 28 (0.88 - 1.1)
E
1
50 plugs
1.4 (3)
78248
GP110130
28 - 33 (1.1 - 1.3)
F
1
50 plugs
1.8 (4)
78247
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
10 kits
4.1 (9)
78494
1 pkg.
0.02 (0.04)
77804
Underground Closure Support Kit
For supporting closure assembly to racks in vault or manhole applications
UCS10K
Underground Support Kit
2
Universal Plugging Spools
For plugging unused cable openings in endplate openings. Black in color.
FX-K
172
For 25 (1.0) Cable Openings
25
GX-K
For 41 (1.6) Cable Openings
25
1 pkg.
0.04 (0.08)
77913
HX-K
For 51 (2.2) Cable Openings
25
1 pkg.
0.05 (0.10)
77925
JX-K
For 71 (2.8) Cable Openings
25
1 pkg.
0.06 (0.14)
77977
KX-K
For 86 (3.4) Cable Openings
25
1 pkg.
0.08 (0.17)
77990
LX-K
For 102 (4.0) Cable Openings
1
1 pkg.
0.10 (0.22)
77996
MX-K
For 112 (4.4) Cable Openings
10
1 pkg.
0.12 (0.27)
78004
Ordering Information for 3M™ 2-Type Closure and 3M™ 4-Type Fire Retardant Vault Closure
Accessories and Replacement Parts
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
Universal Plugging Spools (Fire Retardant)
For plugging unused cable openings in endplate openings. Gray in color.
FX-4-K
For 25 (1.0) Cable Openings
25
1 pkg.
0.02 (0.04)
77802
GX-4-K
For 41 (1.6) Cable Openings
1
1 pkg.
0.04 (0.08)
–
HX-4-K
For 51 (2.2) Cable Openings
1
1 pkg.
0.05 (0.10)
77924
JX-4-K
For 71 (2.8) Cable Openings
1
1 pkg.
0.06 (0.14)
77976
KX-4-K
For 86 (3.4) Cable Openings
1
1 pkg.
0.08 (0.17)
77989
LX-4-K
For 102 (4.0) Cable Openings
1
1 pkg.
0.10 (0.22)
77995
MX-4-K
For 112 (4.4) Cable Openings
1
1 pkg.
0.12 (0.27)
78002
1 pkg.
0.9 (2)
77796
Universal Slotted Sealing Washers (Bulk Packaging)
For sealing cable entrances in endplate openings. Black in color.
FS-B-M200
Cable Range – 10 - 25 (0.4 - 1.0)
200
GS-B-M200
Cable Range – 10- 41 (0.4 - 1.6)
200
1 pkg.
2.3 (5)
77908
HS-B-M200
Cable Range – 10 - 51 (0.4 - 2.2)
200
1 pkg.
3.2 (7)
78400
JS-B-M200
Cable Range – 10 - 71 (0.4 - 2.8)
200
1 pkg.
4.6 (10)
77969
KS-B-M200
Cable Range – 10 - 86 (0.4 - 3.4)
200
1 pkg.
6.4 (14)
77983
LS-B-M100
Cable Range – 41 - 102 (1.6 - 4.0)
100
1 pkg.
4.1 (9)
77993
MS-B-M100
Cable Range – 41 - 112 (1.6 - 4.4)
100
1 pkg.
6.4 (14)
78000
0.9 (2)
77794
Universal Slotted Sealing Washers (Fire Retardant - Bulk Packaging)
For sealing cable entrances in endplate openings. Gray in color.
FS-4-B-M200
Cable Range – 10 - 25 (0.4 - 1.0)
200
1 pkg.
GS-4-B-M200
Cable Range – 10 - 41 (0.4 - 1.6)
200
1 pkg.
2.3 (5)
77906
HS-4-B-M200
Cable Range – 10 - 51 (0.4 - 2.2)
200
1 pkg.
3.2 (7)
77919
JS-4-B-M200
Cable Range – 10 - 71 (0.4 - 2.8)
200
1 pkg.
4.6 (10)
77967
KS-4-B-M200
Cable Range – 10 - 86 (0.4 - 3.4)
200
1 pkg.
6.4 (10)
77981
LS-4-B-M100
Cable Range – 41 - 102 (1.6 - 4.0)
100
1 pkg.
4.1 (9)
77991
MS-4-B-M100
Cable Range – 41 - 112 (1.6 - 4.4)
100
1 pkg.
6.4 (14)
77998
173
3M™ Tools
Ordering Information for Tools
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
1
1 kit
4.5 (10)
89781
1
1 kit
5.9 (13)
78492
Tools for Closure Assembly
Tools required for closure assembly but not included with cover or endplate kits.
2-TYPE/TK
Complete Tool Kit
Universal Alignment Tool Kit
For maintaining endplate spacing and alignment.
UAT20K
Alignment Kit
Washer Cutter Tool Kit
For cutting universal sealing washers.
WCT11K
Washer Cutter Tool Kit
1
10 kits
5.9 (13)
78152
WCB11K
Replacement Blade Kit
2
10 pkgs.
2.3 (5)
78149
*SPW10K does not include sockets.
**TWS10K includes 12.7 and 11.1 mm (1/2 and 7/16") sockets and 3 socket extender.
***TK-3M includes Carrying Case and WCT11K Washer Cutter Tool.
174
3M™ Z Watertight Closure System
Closure Selection Guide
To order Z Watertight Closure System, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
For Protection of
Nonpressurized Copper
Conductors
The Z Watertight Closure is made
of an impact-resistant plastic and is
corrosion resistant. The closure can
be used for straight or multiple branch
splices and there is a fire retardant
version available for building
applications. It is lightweight, watertight
and re-enterable. Z Watertight Closures
may be mounted on strands or walls and
accommodate up to 300-pair copper
conductor splices. The system will also
accommodate the entrance
of up to four cables, 41 mm (1.6") in
diameter. All components come in
one kit and special tools are not required.
222
3M™ 710 Modules
3M MS
™
2™
pg. 22
Modules
pg. 6
Shield Bonding
pg. 200
3M™ Scotchlok™ Connectors
pg. 2
Ordering Information for 3M™ Z Watertight Closure System
Product
Number
Description
Max.
Number
Cable Pairs
Length
mm (in.)
Width
mm (in.)
Max. No.
Height
mm (in.)
Approx.
Weight
kg (lbs.)
Min.
Order
(each)
UPC
051138-
300
419 (16.5 )
114 (4.5 )
165 (6.5)
2.3 (5)
1
77489
300
419 (16.5 )
114 (4.5 )
165 (6.5)
2.7 (6)
1
77494
Closure Selection
2Z2AAA-510
Standard
2Z4AAA-510 Fire Retardant*
Standard Package = Kit, Minimum Order/Ordering Multiple = 1 Kit.
*Gray in color.
175
Ordering Information for Accessories and Replacement Parts for 3M™ Z Watertight Series Closures
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
Min.
Order
(each)
UPC
051138-
Two Cable Branch Kit
Provides branching adapter spool and internal bonding for two additional cables. Up to 19 mm (0.75") each cable opening.
BKZ10-2
Standard
1
1 kit
0.2 (.4)
1
77719
Fire retardant*
1
1 kit
0.2 (.4)
1
78652
Standard plugging spools
2
1 kit
0.1 (.2)
1
77916
Fire retardant plugging spools*
2
1 kit
0.1 (.2)
1
77915
40
77704
BKZ10-2-4
Plugging Spool Kit
Provides two plugging spools for plugging unused cable openings.
GZX-K
GZX-4-K
Back Cover Clip Kit
For supporting back cover to cables during splicing. Also keeps endplates parallel and properly spaced.
BCC10K
*Gray in color.
176
Back cover clip kit kor Z-type covers
2 clips w/cable ties
20 kits
2 (0.9)
3M™ Pressurized Closures 50/51P Series
Closure Selection Guide
To order 50/51P Series Pressurized, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
A complete pressure tight
closure system for protecting
spliced communication
cables in a wide range
of applications.
The 50/51P Series Pressurized
Closure can be used for aerial and
underground applications. Seven sizes
will accommodate cable diameters
from 10 mm (0.4") to 71mm (2.8")
and splices up to 1500 pairs. This
closure may be used for sheath
openings of 330 mm (13") or less
to a maximum of 483 mm (19").
It is available in straight or branch
splice configurations.
223
Ordering Information for 50/51P-Type Pressurized Closure System
Product
Number
Inside
Diameter
mm (in.)
Overall
Length
mm (in.)
Sheath
Opening
mm (in.)
Max. Sheath
Diameter
mm (in.)
Max.
Cable Pairs
24 Ga. 26 Ga.
Approx.
Weight
kg (lbs.)
Min.
Order
(each)
UPC
051138-
2.7 (6)
1
77497
Straight Splice Configurations
50AA3P-510
51 (2.0)
546 (21.5)
330 (13.0)
25 (2 - 1.0)
100
100
50B3P-510
83 (3.25)
724 (28.5)
483 (19.0)
41 (2 - 1.6)
300
400
4.1 (9)
1
77500
50C3P-510
114 (4.5)
724 (28.5)
483 (19.0)
56 (2 - 2.2)
600
900
6.4 (14)
1
77633
50D3P-510
159 (6.25)
724 (28.5)
483 (19.0)
76 (2 - 3.0)
1200
1500
6.8 (15)
1
77636
Branch Splice Configurations
51AA3P-510
76 (3.0)
546 (21.5)
330 (13.0)
25 (4 - 1.0)
100
200
3.2 (7)
1
77641
51B3P-510
127 (5.0)
724 (28.5)
483 (19.0)
41 (4 - 1.6)
400
600
6.4 (14)
1
77646
51D3P-510
184 (7.25)
724 (28.5)
483 (19.0)
76 (4 - 3.0)
1500
1800
8.6 (19)
1
77650
50AA3P-110
—
—
—
—
—
—
—
77496
50B3P-110
—
—
—
—
—
—
—
77499
50C3P-110
—
—
—
—
—
—
—
77632
50D3P-110
—
—
—
—
—
—
—
77635
51AA3P-110
—
—
—
—
—
—
—
77640
51B3P-110
—
—
—
—
—
—
—
77645
51D3P-110
—
—
—
—
—
—
—
77649
NOTE: Maximum number of cable pairs based on using 25 modular connectors for in-line splice.
24 gauge = 0.51 mm, 26 gauge - 0.4 mm.
177
3M™ Tools, Accessories and
Replacement Parts
for 3M™ Series Aerial Closures 50/51P&N
Ordering Information for 3M™ Aerial Closures 50/51 Series—Pressurized and Non-Pressurized—
Tools, Accessories and Replacement Parts
Product
Number
Descriptions/
Dimensions
mm (in.)
Quantity in
Standard
Package
Min. Order/
Ordering
Multiple
Weight per
Min. Order
kg (lbs.)
UPC
051138-
2
20 kits
3.2 (7)
78780
1
100 kits
2.7 (6)
78422
25
4 pkgs.
2.7 (6)
78096
Aerial Hanger Kit
Used for supporting closure assembly to strand wire in aerial applications.
AHK5-M20
Hanger Kit
Ant Repellant Kit
Used to prevent the entry of ants into the splice case.
ARKO-26
Ant Kit
Bolts for 50/51 Type Closures
For replacing lost or damaged bolts in endplates and covers. S = Short, L = Long.
SB4LK
6.4 (1/4) - 508 x 44.5 (20 x 1.75) - L
Jacking Plates for 50/51 Type Closures
For replacing lost or damaged jacking plates.
CIT68-4K
Threaded Jacking Plate,
Bolt Size = 6.4 (1/4)
25
4 pkgs.
1.4 (3)
77737
CIT68K
Threaded Jacking Plate,
Bolt Size = 7.9 (5/16)
25
4 pkgs.
1.4 (3)
77738
CIU68K
Unthreaded Jacking Plate,
All Bolt Sizes
25
4 pkgs.
1.4 (3)
77739
1 kit
0.6 (1.4)
78747
Thru the Seal Ground Strap for 50/51 Type Closures
L50SBK
Ground Strap
10
Insert Kit for 50/51 Type Closures
For replacing lost or damaged inserts.
178
SNI300-5K
7.9 (5/16) Threaded Insert
25
4 pkgs.
0.5 (1)
78111
SWI300-5K
7.9 (5/16) Unthreaded Insert
25
4 pkgs.
0.5 (1)
78119
3M™ K&B Vault and Riser Closures
Closure Selection Guide
To order K&B Vault and Riser Closures, follow these steps:
1. What is your pair count?
2. What is your cable size?
3. What is your sheath opening?
4. What type of connector are you using? Module (MS2 or 710) or Discrete (Scotchlok)?
Note: Bundles built with modular connectors are half the size of discretes.
5. What is your splice bundle diameter?
These questions should guide you in choosing the correct closure.
K&B Vault Closures
K&B Closures are strong, lightweight,
and protect a wide variety of vault
splice configurations with an air and
water tight seal. K&B closures offer
a full product line that is simple to
install and reenter. This full product
offering provides closures in standard
kits to protect the majority of cable
configurations and customized and
special closures to meet your vault
requirements.
All K&B closures are flame
retardant.
RUS Listed
Ordering K&B Vault
Closures
The key to ordering the correct K&B
Vault Closures Kit is knowing what
components suit the splice configuration.
The kit can be a solid or split sleeve
and have a collared end cap, multiple
end cap, stainless steel hose clamps
and cable lubricant.
Because the K&B vault closure is
air and water tight, the closures
collared and multiple end caps have to
be sized precisely to the cables
entering them. When ordering K&B
closures, three pertinent facts are
needed:
• The diameter of all the cables, field
and tip, to be spliced. This is needed
for hole sizing of the end caps.
• The maximum number of cable
pairs to be spliced and the type of
connector to be used for splicing, an
example is a 2700-pair field cable,
spliced to 27-100 pair tip cable is a
“2700-pair splice.” This determines
the size/diameter of the closure.
• The number of tip cables to be
enclosed.
NOTE: If the application determines
that the closure does not need to be air
224
and water tight, then the use of a K&B
riser closure should be considered.
The standard K&B Vault Closure
Kit contains the following:
• One sleeve, solid or split
• One collared end cap
• One multiple end cap
• Hose Clamps:
Solid sleeve - two sleeve clamps,
one collared clamp
Split sleeve - three sleeve clamps,
one collared clamp
Steps to Ordering Standard
K&B Closures Kits
1. Determine the maximum number of
cable pairs, entering into the closure.
If a 1200-pair field cable enters the
closure, but is only spliced to 6-100
pair tip cables, this is still sized at the
1200 potential pairs.
2. Determine the type of module
or connector to be used for splicing.
The 25-pair module/connector is
recommended because this can make
for a more compact splice bundle for
a smaller closure diameter.
3. Use “Chart A” to make a selection
from the standard kits available. With
the standard kits, the Collared Cap
opening can be up to 6.35 mm (1/4")
larger than the cable diameters. The
clamp will tighten it down, and the
multiple cap needs to be within the
stated diameter range.
4. Fill any vacant multiple holes with
the appropriate plug.
179
Standard 3M™ K&B Closure Selection Guide
Maximum Pair Count
3M™ MS2™*
Solid Sleeve
Split Sleeve
3M™ Scotchlok™
Kit Part
Number
Diameter
Length
Kit Part
Number
Diameter
Length
100
50
KB2-100-2
2-24
—
—
200
100
KB3-175-1
3-24
KBS3-175-1
3DS-24
400
200
KB4-175-1
KB4-175-2
4-24
4-24
—
—
600
300
KB5-100-6
KB5-130-6
KB5-175-2
5-26
5-26
5-26
KBS5-100-6
KBS5-130-6
KBS5-175-2
5DS-26
5DS-26
5DS-26
900
400
KB6-100-9
KB6-130-9
KB6-175-3
6-26
6-26
6-26
KBS6-100-9
KBS6-130-9
KBS6-175-3
6DS-26
6DS-26
6DS-26
1200
600
KB7-100-15
KB7-175-5
7-26
7-26
KBS7-100-15
KBS7-175-5
7DS-26
7DS-26
2400
800
KB8-100-24
KB8-130-18
KB8-175-8
8-26
8-26
8-26
KBS8-100-24
KBS8-130-18
KBS8-175-8
8DS-26
8DS-26
8DS-26
2700
900
KB9-100-27
KB9-130-24
KB9-175-9
9-26
9-26
9-26
KBS9-100-27
KBS9-130-24
KBS9-175-9
9DS-26
9DS-26
9DS-26
3600
—
KB10-100-36
KB10-100-36L
10-26
10-26
KBS10-100-36
KBS10-100-36L
10DS-26
10DS-34
4800
—
KB12-130-37
12-28
—
—
* Based on 2-bank In-line splice using 4000D/TR modules.
** Collared Cap opening can be up to 6.35 mm (1/4") longer than the cable diameter, the clamp will tighten it down.
*** Two clamps are included with solid sleeve order. Three clamps are included with split sleeve order. One clamp is included with collared end cap.
**** 254 mm (10") cap with 27- 22 mm to 27 mm (.85" to 1.06") holes around 1- 76 mm (3.0") hole.
180
Collared End Caps**
Multiple End Caps
Part Number
Hole Size
mm (in.)
Part Number
Hole Size
mm (in.)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
C7-100-15
C7-175-5
21.5-26.0 (.85-1.06)
31.7-41.4 (1.25-1.75)
C8-300-1C
C8-300-1C
C8-300-1C
76.2 (3)
76.2 (3)
76.2 (3)
C8-100-24
C8-130-18
C8-175-8
21.5-26.0 (.85-1.06)
27.4-33 (1.08-1.3)
31.7-41.4 (1.25-1.75)
C9-300-1C
C9-300-1C
C9-300-1C
76.2 (3)
76.2 (3)
76.2 (3)
C9-100-27
C9-130-24
C9-175-9
21.5-26.0 (.85-1.06)
27.4-33 (1.08-1.3)
31.7-41.4 (1.25-1.75)
C10-360-1C
C10-360-1C
91.4 (3.6)
91.4 (3.6)
C10-100-36
C10-100-27/300
21.5-26.0 (.85-1.06)
21.5-26.0 (.85-1.06)
C12-390-1C
C12-390-1C
99 (3.9)
99 (3.9)
C12-100-48
C12-130-37
21.5-26.0 (.85-1.06)
27.4-33 (1.08-1.3)
—
* Based on 2-bank In-line splice using 4000D/TR modules.
** Collared Cap opening can be up to 6.35 mm (1/4”) longer than the cable diameter, the clamp will tighten it down.
*** Two clamps are included with solid sleeve order. Three clamps are included with split sleeve order. One clamp is included with collared end cap.
**** 254 mm (10”) cap with 27- 22 mm to 27 mm (.85" to1.06") holes around 1- 76 mm (3.0") hole.
181
Ordering Information for 3M™ K&B Vault with Solid Sleeve Closure Kits
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
KB2-100-2
1/cs., .91 (2.0)/cs.
1 each
054007-26818
KB3-175-1
1/cs., 1.81 (4.0)/cs.
1 each
054007-26820
KB4-175-1
1/cs., 2.27 (5.0)/cs.
1 each
054007-26822
KB4-175-2
1/cs., 2.27 (5.0)/cs.
1 each
054007-26823
KB5-100-6
1/cs., 2.27 (5.0)/cs.
1 each
054007-26825
KB5-130-6
1/cs., 2.27 (5.0)/cs.
1 each
054007-26826
KB5-175-2
1/cs., 2.27 (5.0)/cs.
1 each
054007-26827
KB6-100-9
1/cs., 3.63 (8.0)/cs.
1 each
054007-26829
KB6-130-9
1/cs., 3.63 (8.0)/cs.
1 each
054007-26830
KB6-175-3
1/cs., 3.63 (8.0)/cs.
1 each
054007-26831
KB7-100-15
1/cs., 3.63 (8.0)/cs.
1 each
054007-26833
KB7-175-5
1/cs., 5.90 (13.0)/cs.
1 each
054007-26834
KB8-100-24
1/cs., 7.26 (16.0)/cs.
1 each
054007-26381
KB8-130-18
1/cs., 7.26 (16.0)/cs.
1 each
054007-26382
KB8-175-8
1/cs., 7.26 (16.0)/cs.
1 each
054007-26464
KB9-100-27
1/cs., 7.26 (16.0)/cs.
1 each
054007-26465
KB9-130-24
1/cs., 8.16 (18.0)/cs.
1 each
054007-26466
KB9-175-9
1/cs., 8.16 (18.0)/cs.
1 each
054007-26504
KB10-100-36
1/cs., 9.07 (20.0)/cs.
1 each
054007-26624
KB10-100-36L
1/cs., 9.07 (20.0)/cs.
1 each
054007-26505
KB12-130-37
1/cs., 12.70 (28.0)/cs.
1 each
054007-26507
Ordering Information for 3M™ K&B Vault Closure Kits with Split Sleeve
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
KBS3-175-1
1/cs., 1.81 (4.0)/cs.
1 each
054007-26835
KBS5-100-6
1/cs., 2.27 (5.0)/cs.
1 each
054007-26837
KBS5-130-6
1/cs., 2.27 (5.0)/cs.
1 each
054007-26838
KBS5-175-2
1/cs., 2.27 (5.0)/cs.
1 each
054007-26839
KBS6-100-9
1/cs., 3.63 (8.0)/cs.
1 each
054007-26841
KBS6-130-9
1/cs., 3.63 (8.0)/cs.
1 each
054007-26842
KBS6-175-3
1/cs., 3.63 (8.0)/cs.
1 each
054007-26843
KBS7-100-15
1/cs., 5.9 (13.0)/cs.
1 each
054007-26845
KBS7-175-5
1/cs., 5.9 (13.0)/cs.
1 each
054007-26846
KBS8-100-24
1/cs., 7.26 (16.0)/cs.
1 each
054007-26566
KBS8-130-18
1/cs., 7.26 (16.0)/cs.
1 each
054007-26567
KBS8-175-8
1/cs., 7.26 (16.0)/cs.
1 each
054007-26568
KBS9-100-27
1/cs., 8.16 (18.0)/cs.
1 each
054007-26569
KBS9-130-24
1/cs., 8.16 (18.0)/cs.
1 each
054007-26570
KBS9-175-9
1/cs., 8.16 (18.0)/cs.
1 each
054007-26571
KBS10-100-36 26"
1/cs., 9.07 (20.0)/cs.
1 each
054007-26572
KBS10-100-36L 34"
1/cs., 9.07 (20.0)/cs.
1 each
054007-26573
Note: Solid sleeve kits contain 2 each sleeve clamps and 1 each collar clamp. Split sleeve kits come with 3 each sleeve clamps and 1 each
collar clamp.
182
Specifications for 3M™ K&B Vault Closure Plugs
Rubber
Bushings
Dimensional
Diagram
Part
Number
Dimension
A
Dimension
B
Plugs
Collared
PC-175
PC-225
PC-275
PC-298
1.75 (44)
2.25 (57)
2.75 (70)
2.98 (76)
Tapered
PT-100
PT-120
PT-125
PT-130
PT-175
PT-225
1.0 (25)
1.2 (31)
1.25 (32)
1.3 (33)
1.75 (44)
2.25 (57)
0.75 (19)
1.25 (32)
1.75 (44)
NOTE: inches (mm) *If inside diameter is less than 6.35 mm (0.25"), use KBS-1 to seal.
Ordering Information for 3M™ K&B Vault Closure Collared Plugs
Product Number
Packaging
Minimum Order
UPC
kg (oz.)
PC-175
1/cs., 0.06 (2)
1 each
054007-26433
PC-225
1/cs., 0.09 (3)
1 each
054007-26434
PC-275
1/cs., 0.14 (5)
1 each
054007-26436
PC-298
1/cs., 0.17 (6)
1 each
054007-26438
Ordering Information for 3M™ K&B Vault Closure Tapered Plugs
Product Number
Packaging
Minimum Order
UPC
kg (oz.)
PT-100
1/cs.
0.03 (1)/cs.
1 each
054007-17602
PT-120
1/cs.
0.03 (1)/cs.
1 each
054007-26441
PT-125
1/cs.
0.03 (1)/cs.
1 each
054007-26440
PT-130
1/cs.
0.06 (2)/cs.
1 each
054007-17603
PT-175
1/cs.
0.06 (2)/cs.
1 each
054007-26443
183
Selecting and Sizing
Bushings
As an example:
• You have a 1200-pair splice, with
a 1200 pair field cable that has
50.8 mm (2.0") OD and 12-100
pair tip that has 25.4 mm (1.0")
OD.
• The approximate closure size is a
KB7-100-15. It has a multiple end
cap with 15 openings of 25.4 mm
(1.0") OD and a collared end cap
with an opening of 69.9 mm
(2.75") OD.
• The multiple end cap will give the
tip cable a precise fit.
• The collared end cap is too big
and needs a B275-200 bushing to
reduce the opening.
The order should be:
• One each KB7-100-15
• One each B-275-200-IC (this
bushing fits into the 69.9 mm
(2.75") hole and reduces it down
to 50.8 mm (2.0"). The “IC”
stands for Insert and Cement)
• Three each PT100
Ordering Information for 3M™ K&B Vault Closure Bushings
Rubber
Bushings
Dimensional
Diagram
Part
Number
Dimension
A
Dimension
B
Dimension
C
B-100-70
B-125-100
1.0 (28 )
1.25 (32)
0.92 (23.4)
1.06 (26.9)
0.62 (15.7)
0.85 (21.8)
B-175-125
B-175-150
B-225-175
B-225-200
B-275-200
B-275-225
B-275-250
B-300-275
B-360-300
B-360-330
B-390-360
1.75 (44)
1.75 (44)
2.25 (57)
2.25 (57)
2.75 (70)
2.75 (70)
2.75 (70)
3.0 (76)
3.6 (91)
3.6 (91)
3.9 (99)
1.25 (32)
1.5 (38)
1.75 (44)
2.0 (51)
2.0 (51)
2.25 (57)
2.5 (64)
2.75 (70)
3.0 (76)
3.3 (84)
3.6 (91)
B-1.00-0.25
B-2.50-1.00
0.49 (12.4)
1.0 (25.4)
0.69 (17.5)
1.40 (35.6)
0.79 (20.1)
1.90 (48.3)
B-1.75-1.50-1.00
1.12 (28.4)
1.50 (38.1)
1.75 (44.5)
Dimension
D
Variable Bushings
NOTE: inches (mm) *If inside diameter is less than 6.35 mm (0.25"), use KBS-1 to seal.
Collared caps must be bushed to within 1/4" of cable diamter.
184
1.0 (25.4)
2.50 (63.5)
Ordering Information for 3M™ K&B Vault Closure Solid Sleeves
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
3-24
1/cs, .45 (1.0)/cs.
1 each
054007-26819
4-24
1/cs., .91 (2.0)/cs.
1 each
054007-26821
5-26
1/cs., .91 (2.0)/cs.
1 each
054007-26824
6-26
1/cs., 1.36 (3.0)/cs.
1 each
054007-26828
7-26
1/cs., 2.27 (5.0)/cs.
1 each
054007-26832
10-26
1/cs., 3.18 (7.0)/cs.
1 each
054007-26623
Ordering Information for 3M™ K&B Vault Closure Split Sleeves
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
5DS-26
1/cs., 1.36 (3.0)/cs.
1 each
054007-26836
6DS-26
1/cs., 1.81 (4.0)/cs.
1 each
054007-26840
7DS-26
1/cs., 2.27 (5.0)/cs.
1 each
054007-26844
10DS-34
1/cs., 3.63 (8.0)/cs.
1 each
054007-26574
12SS-28
1/cs., 4.99 (11.0)/cs.
1 each
054007-26693
Ordering Information for 3M™ K&B Vault Closure Multiple Caps
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
C8-100-24
1/cs., 1.7 (3.75)/cs.
1 each
054007-26410
C8-130-18
1/cs., 1.6 (3.5)/cs.
1 each
054007-26411
C8-175-8
1/cs., 1.6 (3.5)/cs.
1 each
054007-26412
C9-100-27
1/cs., 1.7 (3.75)/cs.
1 each
054007-26413
C9-130-24
1/cs., 1.6 (3.5)/cs.
1 each
054007-26414
C9-175-9
1/cs., 1.6 (3.5)/cs.
1 each
054007-26415
C9-275-3
1/cs., 1.4 (3.0)/cs.
1 each
054007-26853
C10-100-27/300 ESS
1/cs., 2.3 (5.0)/cs.
1 each
054007-26689
C10-100-36
1/cs., 2.3 (5.0)/cs.
1 each
054007-26513
C12-130-37
1/cs., 3.1 (6.75)/cs.
1 each
054007-26497
C12-100-48
1/cs., 3.1 (6.75)/cs.
1 each
054007-26697
185
Ordering Information for 3M™ K&B Vault Closure Collared End Caps
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
C8-300-1C
1/cs., 1.36 (3.0)/cs.
1 each
054007-26537
C9-300-1C
1/cs., 1.59 (3.5)/cs.
1 each
054007-26538
C10-360-1C
1/cs., 1.59 (3.5)/cs.
1 each
054007-26539
C12-390-1C
1/cs., 2.49 (5.5)/cs.
1 each
054007-26540
Ordering Information for 3M™ K&B Vault Closure Flat Caps
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
C5 (5")
1/cs., 0.45 (1.0)/cs.
1 each
054007-26698
C6 (6")
1/cs., 0.45 (1.0)/cs.
1 each
054007-26699
C7 (7")
1/cs., 0.45 (1.0)/cs.
1 each
054007-26700
C8 (8")
1/cs., 0.9 (2.0)/cs.
1 each
054007-26701
C9 (9")
1/cs., 1.4 (3.0)/cs.
1 each
054007-26702
C10 (10")
1/cs., 1.4 (3.0)/cs.
1 each
054007-26703
C12 (12")
1/cs., 2.3 (5.0)/cs.
1 each
054007-26704
Ordering Information for 3M™ K&B Vault Closure Puddle Caps
Product Number
Packaging
Minimum Order
UPC
1/cs., 0.91 (2.0)/cs.
1 each
054007-26696
C9-5
1/cs.,1.36 (3.0)/cs.
1 each
054007-26423
C9-7
1/cs., 0.91 (2.0)/cs.
1 each
054007-26424
C10-8
1/cs., 1.81 (4.0)/cs.
1 each
054007-26695
C12-8/6
1/cs., 1.27 (5.0)/cs.
1 each
054007-26852
kg (lbs.)
C8-7
186
Ordering Information for 3M™ K&B Vault Closure Bushings
Product Number
Packaging
Minimum Order
UPC
kg (oz.)
B100-50
1/cs., 0.09 (3)/cs.
1 each
054007-26446
B100-70
1/cs., 0.09 (3)/cs.
1 each
054007-27182
B125-100
1/cs., 0.03 (1)/cs.
1 each
054007-26692
B175-125
1/cs., 0.06 (2)/cs.
1 each
054007-26528
B175-150
1/cs., 0.06 (2)/cs.
1 each
054007-26527
B225-175
1/cs., 0.09 (3)/cs.
1 each
054007-26519
B225-200
1/cs., 0.17 (6)/cs.
1 each
054007-27185
B275-200
1/cs., 0.17 (6)/cs.
1 each
054007-26520
B275-225
1/cs., 0.11 (4)/cs.
1 each
054007-26521
B275-250
1/cs., 0.06 (2)/cs.
1 each
054007-26522
B300-275
1/cs., 0.09 (3)/cs.
1 each
054007-26523
B360-300
1/cs., 0.11 (4)/cs.
1 each
054007-26524
B360-330
1/cs., 0.11 (4)/cs.
1 each
054007-26525
B390-360
1/cs., 0.11 (4)/cs.
1 each
054007-26526
Ordering Information for 3M™ K&B Vault Closure Variable Bushings
Product Number
Packaging
Minimum Order
UPC
kg (oz.)
B-1.0-2.5
1/cs., 0.09 (3)/cs.
1 each
051115-26461
B-2.5-1.0
1/cs., 0.09 (3)/cs.
1 each
054007-26462
B-1.75-1.50-1.0
1/cs., 0.09 (3)/cs.
1 each
054007-26360
187
3M™ K&B Vault Closure Accessories
5925 Fire Barrier Vault
Rehabilitation Kit
RC-100 Splice Supports
225
For use in conjunction with an existing
vertically installed K&B Vault Closure
when specific fire retardancy
requirements such as the Bell System
Technical Reference PUB 55006
(Issue 1, Section 5.53) are required.
Kit contents/size:
• Fire Barrier Foil Mat
298 mm x 3.7 m (11 3/4" x 12')
• No. 69 Glass Cloth Tape
25 mm x 23 m (1" x 25 yds.)
KB-S1 Sealing Kit
226
Designed to reduce closure support
costs. The rack clips permit fast,
multi-positioning of industry standard
manhole racks or uni-struts and hooks
to facilitate support of a closure. Two
supports per set.
227
Designed for sealing split K&B vault
sleeves and split end caps. Each kit
contains a “Mini-Semkit” of 38g of
urethane adhesive, a 50.8 mm x
76.2 mm x 9.5 mm (2" x 3" x 3/8")
ScotchBrite™ 7H Pad, a wooden
spatula, and instructions.
Ordering Information for 3M™ K&B Vault Closure Accessories
Product Number
Packaging
Minimum Order
UPC
1/cs., 4.0 (8.9)/cs.
1 kit
051115-02438
RC-100 Splice Supports
10 sets/cs., 3.5 (7.8)/cs.
10 sets
054007-31713
KB-S1 Sealing Kit
1 kit/cs., 0.15 (0.33)/cs.
1 kit
054007-31101
kg (lbs.)
5925 Fire Barrier Vault
Rehabilitation Kit
188
Bonding Harness
Cable Lubricant
Designed to make vault closure
installation faster by lubricating tip
cables before insertion into multiple
end caps, the cable lubricant
evaporates after use and does not
damage closure elements in any way.
Supplied in a 113.2 g (4 oz.)
dauber-top bottle.
228
For use in closure to ground shields of
spliced cable; 14 AWG.
229
Ordering Information for 3M™ K&B Vault Closure Bonding Harnesses and Cable Lubricant
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
BH2-6
(2,3,4,5,6" closure)
1/cs., 0.23 (0.5)/cs.
1 set
054007-26362
BH7
(7" closure)
1/cs., 0.45 (1.0)/cs.
1 set
054007-26363
BH8-9
(8-9" closure)
Cable Lubricant
1/cs., 0.68 (1.5)/cs.
1 set
054007-26365
1/cs., 0.11 (0.25)/cs.
1 bottle
054007-26512
3M™ K&B Building Riser Closure
The K&B Riser Closure has the same
proven qualities of the K&B Vault
Closure but are used in applications
that do not require an air or water tight
closure. Because of this, the end caps
do not need to precisely fit the cable
and are more versatile and user
friendly. Use “Closure Selection
Guide” for determining the proper
closure size for your application. All
K&B Riser Closures are flame
retardant.
NOTE: Single port SRC end caps
are optional and must be ordered
separately.
Kit contents:
• Split Closure Cover
• Stainless steel hose clamps (2)
• Flex strips (4)
• End caps (2)
-R3 and R5 – 2 each of double (2)
entry conical end caps
-R6-10 – 1 each of a single (1) entry
conical end cap and 1 each of a ten
(10) port rubber end cap. Also 1
each of a 4 ounce bottle of cable
lubricant.
-R7 and R9 – 2 each of triple (3)
entry conical end caps
R3, R5, R7 and R9 Closures
R-6 10 Port/Single
Entry Closure
230
231
189
3M™ K&B Building Riser Closure Selection Guide
Product Number
Closure inside dimensions
Diameter, mm (in.)
Length, mm (in.)
Approx. splice bundle
capacity (Super-Mini)
R-3
R-5
R-6
R-7
R-9
76 (3)
24 (607)
127 (5)
660 (26)
152 (6)
660 (26)
178 (7)
660 (26)
228 (9)
660 (26)
300-pr.
24 AWG or less*
900-pr.
24 AWG*
900-pr.
24 AWG*
1800-pr.
24 AWG*
3000-pr.
26 AWG*
79 (3.1)
61 (2.4)
51 (2.0)
96 (3.8)
79 (3.1)
61 (2.4)
SRC-7
91 (3.6)
SRC-9
96 (3.8)
Maximum allowable cable diameter
Multiple entry end caps
Port 1, mm (in.)
Port 2, mm (in.)
Port 3, mm (in.)
30 (1.2)
30 (1.2)
—
51 (2.0)
51 (2.0)
—
Optional single entry
end caps, mm (in.)
SRC-3
43 (1.7)
SRC-5
61 (2.4)
84 (3.3)
Ports 1-10
28 (1.1)
*Based on 2-Bank Straight Splice using 4000-D/TR Modules.
Ordering Information for 3M™ K&B Building Riser Closure Kits
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
R3 (Double Cap/Double Cap)
10/cs., 11.62 (25.6)/cs.
10 kits
054007-33484
R5 (Double Cap/Double Cap)
1/cs., 2.86 (6.3)/cs.
1 each
054007-33485
R7 (Triple Cap/Triple Cap)
1/cs., 4.18 (9.2)/cs.
1 each
054007-33486
R9 (Triple Cap/Triple Cap)
1/cs., 5.08 (11.2)/cs
10 kits
054007-33487
R6 (Multiple Port End Cap)
1/cs., 4.63 (10.2)/cs.
1 each
054007-33488
3M™ K&B Building Riser Closure End Caps Features
Product Number
Description
Cap Dimension
mm (in.)
SRC-3
Riser Closure End Cap
76 (3)
SRC-5
Riser Closure End Cap
127 (5)
SRC-7
Riser Closure End Cap
178 (7)
SRC-9
Riser Closure End Cap
229 (9)
232
Ordering Information for 3M™ K&B Building Riser Closure End Caps-Single Entry
Product Number
Packaging
Minimum Order
UPC
kg (lbs.)
190
SRC-3
10/cs., 1.22 (2.7)/cs.
10 each
054007-33490
SRC-5
10/cs., 2.8 (6.1)/cs.
10 each
054007-33491
SRC-7
1/cs., 0.63 (1.4)/cs.
1 each
054007-33493
SRC-9
1/cs., 0.77 (1.7)/cs.
1 each
054007-33489
3M™ Network Accessories
233
3M™ Compounds and Sealing Kits
4442 High Gel
Re-enterable Encapsulant
(Non-Urethane Encapsulant)
This
completely reenterable
encapsulant
uses a new
compound
technology.
It delivers a
234
high level of
adhesion and excellent moisture
protection at low
cost. It absorbs cable-filling materials,
yet remains re-enterable. No cable
cleaning is required, even when
splicing filled cable. Contains no
isocyanates.
It provides better penetration of
splice bundles at low temperatures
due to its lower viscosity and longer
gel time.
3M™ Scotchcast™
Encapsulating and
Blocking Compound 4407
Developed for
splice
encapsulation
and pressure
blocking,
Scotchcast
compound
4407 is a
two-part
compound. It
235
features
excellent wetting properties and low
viscosity, which means it flows
quickly and freely. Its low temperature
cure properties mean that it may be
used in almost any type of weather.
Cure time is fast; approximately 1 hour
at 22°C (72°F) and 20 hours at -4°C
(20°F). 4407 is usable to -18°C (0°F).
Designed for both splice encapsulation
and cable blocking, Scotchcast 4407
eliminates the need to stock more than
one compound.
4408 Haplec Blocking
Compound
4408 Haplec
Blocking
Compound is
a highperformance
two-part resin
having high
236
shear
adhesion to plastic insulated
conductors (PIC), even when
the insulation is grease coated (as in
filled cable). It was designed to make
combination moisture/pressure blocks
(especially in filled cable) and pressure
dams for transition splices between
pressurized and grease filled cable.
4408 Haplec Blocking Compound is
conveniently packaged in Unipak
Containers.
191
3M™ Scotchcast™ Pedestal
Base Sealant Kit 4411
3M™ Scotchcast™ Duct
Sealing Kit 4416
3M™ Scotchcast™ Foam Kit
4430-F
A two-part
expanding
sealant used
to fill
pedestal
bases to
prevent
ground
moisture
from
entering the
pedestal. The
237
sealant
protects the cables against rodents,
insects and moisture. An “A” size
unipak bag will expand to fill about
753.80 cubic cm (46 cubic inches); a
“B” size will fill about 1556.77 cubic
cm (95 cubic inches), and a “D” size
will expand to fill about 4096.77 cubic
cm(250 cubic inches).
The 4416
Duct Sealing
Kit prevents
water and
other liquids
from running
out of a cable
duct and
entering a
manhole or
central office.
238
Kit contents:
• Foam strip
• Spacer web strip
• Scotchcast cleaning pads (4)
• Scotchcast expandable sealant (4)
• Plastic tubes
Open cell
polyurethane
foam strips
used for
cable duct
sealing or for
239
containing
expandable sealants. Kit contents:
8 rolls foam, 25.4 mm x 76.2 mm x
1.8 m (1" x 3" x 72").
RUS Listed
RUS Listed
Ordering Information for Compounds and Sealing Kits
Product Number
Volume
Packaging
kg (lbs.)/cs.
Minimum
Order
UPC
4442 High Gel Re-enterable Encapsulant
4442-6000 Pouch in Pail
4442-A
4442-C
4442-D
4442-E
6592 ml (6000 g)
90 ml (82 g)
385 ml (350 g)
659 ml (600 g)
292 ml (266 g)
1/cs., 13.70 (30.2)
10/cs., 1 (2.2)
10/cs., 3.8 (8.3)
10/cs., 6.4 (14.1)
10/cs., 3.0 (6.7)
1 units
10 bags
10 bags
10 bags
10 bags
051138-36611
051138-36444
051138-36445
051138-36446
051138-36447
4442 High Gel Foil Unipak Bags
4442-750F
4442-1500F
4442-3000F
824 ml (750 g)
1648 ml (1500 g)
3296 ml (3000 g)
4/cs., 0.775 (1.71)
2/cs., 1.537 (3.39)
1/cs., 3.055 (6.74)
4 bags
2 bags
1 bag
051138-36510
051138-36511
051138-36512
4407 Encapsulating and Blocking Compound
4407-A
4407-B
4407-C
4407-D
4407-E
4407-1500F
4407-3000F
89 ml (94 g)
197 ml (209 g)
396 ml (420 g)
637 ml (675 g)
283 ml (300 g)
1415 ml (1500 g)
2830 ml (3000 g)
1 bag/box, 10/cs., 1.6 (3.5)
1 bag/box. 10/cs., 3.2 (7.0)
1 bag/box, 10/cs., 5.4 (12.0)
1 bag/box, 10/cs., 8.7 (19.1)
1 bag/box, 10/cs., 4.2 (9.3)
1 unit/cs., 2.04 (4.5)
1 unit/cs., 3.4 (8.8)
10 bags
10 bags
10 bags
10 bags
10 bags
1 unit
1 unit
054007-30556
054007-30557
054007-30558
054007-30559
054007-30560
051138-75381
051138-75382
4408 Haplec Blocking Compound
4408-D
4408-E
632 ml (600 g)
316 ml (300 g)
1 bag/box, 10/cs., 7.5 (16.5)
1 bag/box, 10/cs., 4.1 (9.1)
10 bags
10 bags
054007-92966
054007-92967
4411 Pedestal Base Sealant Kit
4411-A
4411-B
4411-D
4411-750F
795 ml (96.3 g)
1570 ml (190 g)
4130 ml (500 g)
6195 ml (750 g)
4/box, 16/cs., 2.7 (6.0)
4/box, 16/cs., 4.3 (9.5)
4/box, 16/cs., 10.3 (22.8)
4 units/cs., 4.7 (10.4)
16 bags
16 bags
16 bags
4 units
051138-33065
051138-32006
051138-32562
051138-70500
4416 Duct Sealing Kit
—
1 kit/cs., 1.5 (3.3)
1 kit
054007-57220
4430-F Duct Foam Kit
—
8 rolls/kit, 1 kit/cs. 1.6 (3.6)
1 kit
051138-33389
Note: Volume in milliliters (ml) is equal to 3,785.4 ml/1 gallon.
192
3M™ Pressure and Moisture Blocking Kits
3M™ Scotchcast™ Pedestal
Pressure/Moisture
Blocking Kit 8964
A system for
PIC air core
cable
blocking.
Used to
make a
pressure
240
block and
moisture seal at the pedestal interface.
The kit contains a universal sleeve and
the pourable Haplec 4408 compound
conveniently packaged in a unipak
container. The 8964 kit includes: 1
closure body 254 mm x 355.6 mm
(10" x 12"), 1 spacer web 127 mm x
228.6 mm (5" x 9"), 1 mastic strip 254
mm (10"), 1 fibreglas strip roll 38.1
mm x 0.9 mm (1 1/2"x 36"), 1 4408
Haplec blocking compound D bag 600
g (21.2 oz.), 1 Instruction sheet.
3M™ Scotchcast™ Open
Sheath Blocking Closures
4530, 4530-L, 4530-S/NB/4408
This system
provides full
pressure
blocking on air
core cable
(paper or pulp
insulated cable
that has not
241
been treated
with anti-wetting agents and PIC).
Compound filling of the cable block
can be accomplished by pouring and
injecting or, when cable is under air
pressure, by injecting alone.
mess while the cross fitting permits the
addition of an “F” valve for adding
buffered air or monitoring. The 4477-R
kit includes 60 plungers for SCS usage.
Scotchcast 4407 Encapsulating and
Blocking Compound is used with the
4530 and 4530-L closure kits.
Scotchcast 4407 compound is a
two-part polyurethane compound
characterized by excellent wetting
properties and low viscosity which is
ideal for pressure blocking
applications. The 4407 compound is
sold separately from the closure
kit to permit optimization of the
amount of compound used.
3M™ Scotchcast™ Single
Cartridge System for
Plugging 4407/SCS
3M™ Scotchcast™ Plugging
Under Pressure (PUP) Kit
4477 and 4477-R
(Air Pressure Blocking)
This easy-touse kit is a
system that
allows the
craftsman to
make a
pressure
block without
cable line air
242
pressure
shutdown. The Scotchcast 4477 PUP
Kit saves time in making a pressure
block because it contains all the
necessary components in a system
package. The 4477-R kit is a
replenishment kit that permits use of
4477 kit components that are removed
after plug curing for other pressure
block applications. The PUP kit’s relief
valve and bypass tube automatically
equalize pressure to 5 P.S.I. on both
sides of the injection point. The
system’s injection valve permits
compound injection without loss or
The Scotchcast Cable Blocking
System
features a
reusable
injection
cartridge
which can be
used for as
many as six
injections of
Scotchcast
4407
compound,
or up to 72
oz. (2 kg) of
243
compound,
depending on the size of the block.
The Single Cartridge System can be
used on both open and direct sheath
applications, on vertical as well as
horizontal blocks, and on plugs made
under pressure. The cable blocking
system comes with an injection gun.
The empty cartridge is screwed
onto the injection port of the sheath or
4530 closure. After the compound is
poured, a plunger is inserted, the
injection gun is placed on the
cartridge, and the compound is
injected into the sheath or the closure.
This is repeated using the same
cartridge until the block is completed
or six plungers have been used.
Ordering Information for 3M ™ Scotchcast Pressure Blocking Kits 8964
Product Number
Scotchcast 8964
Plugging Under Pressure (PUP) Kits
4477 PUP Kit
4477-R PUP Replenishment Kit
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
1/cs., 1.1 (2.4)
1 kit
054007-92965
1/cs., 0.58 (1.3)
10 petcocks & 60 plungers/kit,
1/cs., 0.49 (1.1)
1 kit
1 kit
054007-31090
054007-31933
193
Kit Components for the 3M™ Scotchcast™ Pressure and Moisture Blocking Kits 4530 Series
Kit Product Numbers
4530
4530-L
4530-S/NB/4408
•
•
•
Kit Contents
Injection sleeve
Fill port caps (2)
•
•
•
W9 channeling wedges (12)
•
•
•
4460-S shield bond connectors (2)
•
•
•
25T grounding braid (356 mm (14") strip)
•
•
•
Fiberglass tape (2 strips)
•
•
•
Spacer web
•
•
•
Air vent plugs (2)
•
•
•
Mastic strip
•
•
•
Stainless steel hose clamps (2)
•
•
•
378 mm (1/10 gal.) injection cartridge
•
•
•
Stackable plungers (5)
•
•
•
Injection caps (2)
•
•
•
13 mm (1/2") O.D. tubing 4"
•
•
•
3 mm (1/8") O.D. tubing 6"
•
•
•
Fiberglass strips (2)
•
Funnel
•
•
•
•
“E” size bag of 4408 Haplec Blocking Compound
•
Ordering information
Packaging kg (lbs.)
1/box, 10/cs., 7.4 (16.4)
1/cs., 1.2 (2.7)
1/box, 10/cs.
10 kits
1 kit
10 kits
054007-31110
054007-33812
054007-92964
Minimum order
UPC
Kit Components for the 3M™ Scotchcast™ Single Cartridge System Kits 4407 Series
Kit Product Numbers
4407/SCS Kit
4407/SCS-D
4407/SCS-IG
with injection gun
Single cartridge system
Direct sheath
injection kit
12
12
1
Cartridge
6
1
4478 Flanges
6
Petcocks
6
Kit Contents
Plungers
1
“B” Bag 4407
“D” Bags 4407
W9 Channeling wedges
4470 Injection gun
1
1
1
1
6
1
100
6
1
Ordering Information
Packaging
Minimum order
UPC
194
1/cs., 6.3 (13.9)
1/box, 10/cs., 10.5 (23.1)
10/cs., 5.1 (11.3)
1 kit
10 each
10 kits
054007-31107
054007-31094
054007-31768
3M™ Specialty Tapes
Splicing Tapes
2183 E-Z Wrap Elastic Vinyl
E-Z Wrap is a
tough, thin
elastic vinyl
material
which sticks
to itself
when
wrapped in
244
layers. It
forms a compact, durable, flexible,
moisture-proof covering. Protects wire
groups, splice bundles and pulp and
paper insulated wire. Recommended
for Foam Sealed, and Better Buried,
Compound Compression closures.
Size: 3.0 mil thick, 101.6 mm x 30.4 m
(4" x 100')
Scotch® Foam
Collar Tape 26-FC
An open-cell
(similar to
foam rubber),
black
construction
collar with
pressuresensitive
adhesive
245
(slight tack)
on both sides. Excellent co-adhesion
properties and compatibility with
encapsulating compounds. For all
enclosure collar applications.
Size: 51 mm x 1.01 m (2" x 40")
Mastic Sealing Tapes
Scotch® VM Vinyl
Mastic Tape
Scotch® Sealing Tape
2900-R and 2900-3
2178-281 Cord Re-enterable
Mastic
VM Tape
seals out
moisture and
protects
against
corrosion
without the
need for
heating tools.
Two tapes in
246
one (vinyl and
mastic) VM is especially designed for
cable sheath repair, splice case and
load coil case protection, auxiliary
sleeve and cable reel end sealing, drop
wire insulating, conduit repair and
protection of CATV components plus
many other general taping
applications. VM Tape is a rubber
based mastic laminated to an all
weather 0.18 mm (7 mil) vinyl, which
provides double duty protection in one
wrap. Four sizes to meet all possible
applications are available.
Size: 38.1 mm x 6.1 m (1-1/2" x 20'),
101.6 mm x 3.1 m (4" x 10'),
152 mm x 3.1m (6" x 10'), 559 mm x
13.5 m (22" x 10')
A nonconductive
gray mastic
tape with
good
compression
qualities is
resistant to
247
solvents and
maintains its form in temperatures in
excess of 140° C. It can be substituted
for B Sealant tape.
Sizes: 38.1 mm x 1.52 m (1-1/2" x 5'),
76.2 mm x 1.52 m (3" x 5')
The 2178
Cord
Re-enterable
Mastic is
available in
rolls 1.85 m
(6') in length
with a
8.7 mm
(1/3") cord diameter.
249
2178-125 Mastic Tape
2178-125
Mastic Tape
is a nonconductive
black mastic
that provides
excellent
sealing
248
properties
and does not degrade with gasoline or
encapsulating compounds. The tape is
3.2 mm (1/8") thick and is available in
rolls 38.1 mm x 1.1 m (1-1/2" x 45").
195
All Weather Protection Tapes
Scotch® All Weather
Telephone Vinyl Plastic
Tape 88T
Taping end
caps,
wrapping for
abrasion
protection or
temporarily
securing—
88T Tape
will suit
your needs
for inside or
outside plant
applications
250
as the
handiest tool in your kit. The special
formula adhesive and extra-tough
backing offer you superior adhesion
and excellent conformability over
extended temperature ranges, thus
reducing your inventory needs to one
vinyl tape.
Available in craftsman size rolls to
fit your specific in-the-field use, this
0.22 mm (8-1/2 mil) tape releases
smoothly from the roll in zero weather
and will not ooze adhesive in hot
climates. The 38 mm x 13.5 m (1-1/2"
x 44') roll is especially suited as the
Splicer’s roll, for outside plant usage.
88T Tape resists: water, acids,
alkalies, and is flame retardant. It is
weather resistant and not affected by
sunlight.
3M™ Scotchrap™
All Weather Corrosion
Protection Vinyl Tape 50
50 All Weather Tape is used for
outdoor corrosion applications and is
available in rolls 25 mm x 30.4 m (1"
x 100') and 51 mm x 30.4 m (2" x
100').
130C Linerless Rubber
Splicing Tape
3M™ Scotchfil™
Build-up Tape
Scotchfil Build-up Tape is used for
rapid build-up for sealing collars. It is
available in 38 mm x 1.5 m (1-1/2" x
60") rolls.
Build-up Tapes
26-FC Foam Collar Tape
26-FC
Build-up
Tape is used
for closure
sealing end
collars for
compression
type closures
and comes in
a 51 mm x
1.00 m (2" x
40") roll.
130C Build-up Tape is used for buildup and moisture protection and comes
in six sizes: 25.4 mm x 3.0 m
(1" x 10'), 25.4 mm x 4.6 m (1" x 15'),
19 mm x 9.1 m (0.75" x 30'), 25.4 mm
x 9.1 m (1" x 30'), 38 mm x 9.1 m
(1.5" x 30'), 50.7 mm x 9.1 m
(2" x 30').
251
Identification Tapes
Scotch® Vinyl Identification
Tape 35
35
Identification
Tape is used
for
identifying
special
applications.
It is available
in blue,
orange,
green,
252
brown, gray,
red, violet,
white and yellow. It is available in two
sizes: 12.5 mm x 6.1 m (1/2" x 20')
and 19 mm x 20 m (3/4" x 66').
196
3M™ Specialty Tapes
27 Glass Cloth Tape
69 Glass Cloth Tape
P-4 Cloth Tape
27 Tape is
used for high
strength repair
requirements.
It comes in
three sizes: 19
mm x 32.9 m
(3/4" x 36 yd.),
25 mm x 32.9
m (1" x 36
yd.), and 51
mm x 54.8 m
(2" x 60 yd.).
69 Tape is
used for high
temperature
and high
strength
requirements.
It is available
in 25 mm x
22.8 m (1" x
25 yd.) rolls.
P-4 Cloth Tape is used for restriction
for cable blocking and comes in 25
mm x 9 m (1" x 30') rolls.
255
253
77 Fire and Arc Proofing
Tape
77 Tape is
used for fire
and arc
protection of
cable sheath
material. It
is available
in two sizes:
38 mm x 6.1
m (1-1/2" x
20') and 76.1
mm x 6.1 m.
(3" x 20').
49 Aluminum Foil Tape
49 Tape is
used for
EMI and
moisture
protection.
It is
available in
two sizes:
51 mm x 6.1
m (2" x 20')
and 101.6
mm x 6.1 m
(4" x 20').
256
254
197
3M™ Tape Application Chart
Application
Tape Type
Used For
Sizes
88T
50
General outdoor use
For outdoor applications in corrosive environments
3/4" x 36', 1" x 36", 1-1/2" x 44'
1" x 100', 2" x 100'
Sealing
VM
2900-R
130C
Sealing out moisture and corrosion
Closure sealing collars
Build-up and moisture protection
1-1/2" x 20', 4" x 10', 6" x 10", 22" x 10'
1-1/2" x 60'
3/4" x 30', 2" x 30'
Build-Up
26-FC
130C
Scotchfil™
Closure sealing end collars (for compression type closures)
Build-up and moisture protection
Rapid build-up for sealing collars
2" x 40'
3/4" x 30', 2" x 30'
1-1/2" x 60'
Identification
35
Identifying special applications
Available colors: Blue, Orange, Green, Brown,
Gray, Red, Violet, White, Yellow
1/2" x 20', 3/4" x 66'
Special Use
27
49
69
77
P-4
High strength repair requirements
EMI and moisture protection
High Temperature/high strength requirements
Fire and arc protection of cable sheath material
Restriction for cable blocking
3/4" x 36 yds., 1" x 36 yds., 2" x 60 yds.
2" x 20', 4" x 20'
1" x 25 yds.
1-1/2" x 20', 3" x 20'
1" x 30'
All Weather Protection
Ordering Information for 3M™ Tapes and Sealing Products
Product Number
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
12/cs., 3.6 (8)
12 rolls
054007-37831
VM Tape Vinyl/Mastic
Size: 38 mm x 6.1 m (1-1/2" x 20')
Size: 101.6 mm x 3.048 m (4" x 10')
Size: 152 mm x 3.048 m (6" x 10')
Size: 559 mm x 3.048 m (22" x 10')
1/box, 10/cs., 2.5 (5.5)
1/box, 10/cs., 6.2 (13.7)
1/box, 1/cs., 0.9 (2)
1/box, 1/cs., 2.9 (6.5)
10 rolls
10 rolls
1 roll
1 roll
054007-27575
054007-27576
054007-27577
054007-27578
2900-R Sealing Tape
Size: 38.1 mm x 1.52 m (1-1/2" x 5')
Splicing Film
2183 E-Z Wrap Elastic Vinyl (3.0 mils thick),
Size: 101.6 mm x 30.4 m (4" x 100')
Mastic Tapes
5 /box, 50/cs., 14.42 (31.8)
50 rolls
054007-68546
2178-125 Mastic Tape
Size: 38.1 mm x 1.1 m (1-1/2" x 45")
1/box, 8/cs., 2.7 (6)
8 rolls
054007-91019
2178 Cord Reenterable Mastic
Size: 8.7 mm x 1.85 m (1/3" x 6')
1/box, 14/cs., 2.7 (6)
14 rolls
051138-57614
1/box, 10/cs., 4.23 (9.41)
10 rolls
054007-09656
180/cs., 3.5 (7.8)
1/bag, 10/ctn., 100/cs., 11 (24.2)
144/cs., 4.5 (9.9)
5/ctn., 90/cs., 16.5 (36.8)
180 rolls
100 rolls
144 rolls
90 rolls
051138-70878
051138-58517
051138-70879
051138-58516
1/box, 10/cs., 2.7 (6)
10 rolls
054007-11149
24/cs., 0.8 (1.8)
24 rolls
054007-63835
130C Linerless Rubber Splicing Tape
Size: 19 mm x 9 m (3/4" x 30')
Size: 51 mm x 9 m (2" x 30')
10/ctn., 50/cs., 9.9 (22.2)
50/cs., 25.76 (57.25)
50 rolls
50 rolls
054007-41717
054007-41754
Scotchfil Build-up Tape
Size: 38 mm x 1.5 m (1-1/2" x 60")
1/box, 12/cs., 13 (29)
12 rolls
054007-41750
2228 Sealing Tape
Size: 51 mm x 3.048 m (2" x 10')
All Weather Protection
88T All Weather Telephone Vinyl Plastic Tape
Size: 19 mm x 11 m (3/4" x 36')
Size: 19 mm x 18 m (3/4" x 60')
Size: 25 mm x 11 m (1" x 36')
Size: 38 mm x 13.5 m (1-1/2" x 44')
50 All Weather Tape
Size: 25 mm x 30.4 m (1" x 100')
Build-up Tapes
26-FC Build-up Tape
Size: 51 mm x 1.00 m (2" x 40")
198
Ordering Information for 3M™ Tapes and Sealing Products (cont.)
Product Number
Size
kg (lbs.)/cs.
Packaging
Minimum
Order
UPC
12.8 mm x 6 m (1/2" x 20' )
12.8 mm x 6 m (1/2" x 20' )
12.8 mm x 6 m (1/2" x 20' )
12.8 mm x 6 m (1/2" x 20' )
12.8 mm x 6 m (1/2" x 20' )
12.8 mm x 6 m (1/2" x 20' )
12.8 mm x 6 m (1/2" x 20' )
12.8 mm x 6 m (1/2" x 20' )
12.8 mm x 6 m (1/2" x 20' )
19 mm x 20 m (3/4" x 66')
19 mm x 20 m (3/4" x 66')
19 mm x 20 m (3/4" x 66')
19 mm x 20 m (3/4" x 66')
19 mm x 20 m (3/4" x 66')
19 mm x 20 m (3/4" x 66')
19 mm x 20 m (3/4" x 66')
19 mm x 20 m (3/4" x 66')
19 mm x 20 m (3/4" x 66')
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 4.5 (10)
1/box, 10/ctn., 100/cs., 14.5 (32)
1/box, 10/ctn., 100/cs., 14.5 (32)
1/box, 10/ctn., 100/cs., 14.5 (32)
1/box, 10/ctn., 100/cs., 14.5 (32)
1/box, 10/ctn., 100/cs., 14.5 (32)
1/box, 10/ctn., 100/cs., 14.5 (32)
1/box, 10/ctn., 100/cs., 14.5 (32)
1/box, 10/ctn., 100/cs., 14.5 (32)
1/box, 10/ctn., 100/cs., 14.5 (32)
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
10 rolls
054007-10224
054007-10232
054007-10240
054007-10257
054007-10265
054007-10273
054007-10281
054007-10299
054007-49923
054007-10810
054007-10828
054007-10836
054007-10844
054007-10851
054007-10869
054007-00072
054007-10885
054007-11271
19 mm x 32.9 m (3/4" x 36 yd.)
25 mm x 32.9 m (1" x 36 yd.)
51 mm x 54.8 m (2" x 60 yd.)
48/cs., 7.82 (17.25)
48/cs., 10.32 (22.75)
48/cs., 9.07 (20)
48 rolls
48 rolls
20 rolls
054007-27481
054007-27476
054007-27479
51 mm x 6.1 m (2" x 20')
101.6 mm x 6.1 m (4" x 20')
1/box, 10/ctn., 50/cs., 5.7 (13.5)
1/box, 10/ctn., 50/cs., 11.1 (24.4)
50 rolls
50 rolls
054007-27483
054007-27484
25 mm x 22.8 m (1" x 25 yd.)
45/cs., 1.59 (3.5)
45 rolls
051138-49863
38 mm x 6.1 m (1-1/2" x 20')
76.1 mm x 6.1 m (3" x 20')
1/box, 10/cs., 2.9 (6.4)
1/box, 10/cs., 5.5 (12.1)
10 rolls
10 rolls
054007-42007
054007-42006
101.6 mm x 30.4 m (4" x 100')
12/cs., 3.6 (8)
12 rolls
054007-63835
25 mm x 9 m (1" x 30')
1/box, 10/ctn., 50/cs., 4.5 (10)
50 rolls
054007-25743
Identification Tapes
35 Identification Tape
35-RD20 Red
35-WH20 White
35-BL20 Blue
35-YL20 Yellow
35-GN20 Green
35-OR20 Orange
35-GY20 Gray
35-BN20 Brown
35-VL20 Violet
35-RD66 Red
35-WH66 White
35-BL66 Blue
35-YL66 Yellow
35-GN66 Green
35-OR66 Orange
35-GY66 Gray
35-BN66 Brown
35-VL66 Violet
Special Use Tapes
27 Glass Tape
49 Tape
69 Tape
77 Tape
2183 Tape
P-4 Tape
199
3M™ Reflective Tapes
5016-1 and 5016-2
Reflective Tape
5016-FO Fiber Optic
Warning Labels
This orange,
reflective
adhesivebacked tape
with high-tack
adhesive
suitable for
use at low
temperatures
provides high
visibility at
night or during
daylight
260
conditions.
For marking pedestal cabinets located
in right-of-way areas to warn users of
cabinet locations. Highly visible
markings are designed to prevent
injury and reduce property damage.
Use only on flat surfaces. Will not
adhere well over rivets, nor on
vehicular surfaces. Length: 50 yards
Orange,
reflective
adhesivebacked tape
with high-tack
adhesive is
suitable for
use at low
temperatures.
Imprinted
“Caution Fiber
Optic” on
152 mm (6")
261
spacings.
Letters are 19.0 mm (3/4") and 9.5 mm
(3/8") high, 288 labels per roll.
Ordering Information for 3M Reflective Tapes
Product Number
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
5016-1 Reflective Tape
5016-2 Reflective Tape
1/box, 0.6 (1.4)
1/cs., 0.64 (2.6)
1 roll
1 roll
054007-33813
054007-33814
5016-FO Fiber Optic Warning
Labels
1/cs., 0.6 (1.4)
1 roll
054007-17422
Reflective Tapes
200
3M™ Lettering Kits and Replenishment Decals
3M™ Scotchlite™ Reflective
Lettering System 5005
Black
characters on
a “safety
orange”
background
conform to
the American
National
Standards
Institute
(ANSI)
Z53.l-1979.
All other
features are identical to 5000
Reflective Lettering System.
RUS Listed
3M™ Decal Strip Holder 5012
257
Designed for
easy
attachment to
aerial or
underground
cables, poles
and other
structural
hardware, the
5012 holder
holds 4–l8
characters to
identify
258
splices,
load points, poles, etc. Polyethylene
plastic strip can be attached with cable
ties or nailed to poles.
RUS Listed
3M™ Scotchlite™ Reflective
Lettering System 5025
A complete
A–Z
lettering and
numbering
system in
black on
“safety”
orange.
Characters
are 48 mm x
76 mm (17/8" x 3").
Packaged in
a clear, 36259
compartment
box. Contains 25 each of the letters
A–Z, numbers 0–9, blank and dash.
All characters are self-sticking and
self-spacing. Application tool is
included. Minimum order, 100 each.
Ordering Information for 3M Lettering Kits
Product Number
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
1000/cs., 1.09 (2.4)
1 kit
054007-56488
5012 Decal Strip Holder
25/cs., 0.86 (1.9)
1 box
054007-33388
5025 Reflective Lettering System Kit
100/cs., 2.68 (5.9)
1 kit
054007-34385
Lettering Kits and Replenishment Decals
5005 Reflective Lettering System Kit
201
Ordering Information for 3M™ Scotchlite™ Reflective Lettering System Kit 5005
202
Product
Number
Product Description
Packaging
kgs. (lbs.)/cs.
Minimum
Order
UPC
5005-KIT
Reflective lettering kit (orange and black)
1 kit/cs., 1.0 (2.4)
1 kit
054007-56488
5005-A
Replenishment decal “A”
1000/cs., 0.9 (2.0)
1000 each
054007-56172
5005-B
Replenishment decal “B”
1000/cs., 0.9 (2.0)
1000 each
054007-56173
5005-C
Replenishment decal “C”
1000/cs., 0.9 (2.0)
1000 each
054007-56174
5005-D
Replenishment decal “D”
1000/cs., 0.9 (2.0)
1000 each
054007-56175
5005-E
Replenishment decal “E”
1000/cs., 0.9 (2.0)
1000 each
054007-56176
5005-F
Replenishment decal “F”
1000/cs., 0.9 (2.0)
1000 each
054007-56177
5005-G
Replenishment decal “G”
1000/cs., 0.9 (2.0)
1000 each
054007-56178
5005-H
Replenishment decal “H”
1000/cs., 0.9 (2.0)
1000 each
054007-56179
5005-I
Replenishment decal “I”
1000/cs., 0.9 (2.0)
1000 each
054007-56180
5005-J
Replenishment decal “J”
1000/cs., 0.9 (2.0)
1000 each
054007-56181
5005-K
Replenishment decal “K”
1000/cs., 0.9 (2.0)
1000 each
054007-56182
5005-L
Replenishment decal “L”
1000/cs., 0.9 (2.0)
1000 each
054007-56183
5005-M
Replenishment decal “M”
1000/cs., 0.9 (2.0)
1000 each
054007-56184
5005-N
Replenishment decal “N”
1000/cs., 0.9 (2.0)
1000 each
054007-56185
5005-O
Replenishment decal “O”
1000/cs., 0.9 (2.0)
1000 each
054007-56186
5005-P
Replenishment decal “P”
1000/cs., 0.9 (2.0)
1000 each
054007-56187
5005-Q
Replenishment decal “Q”
1000/cs., 0.9 (2.0)
1000 each
054007-56188
5005-R
Replenishment decal “R”
1000/cs., 0.9 (2.0)
1000 each
054007-56189
5005-S
Replenishment decal “S”
1000/cs., 0.9 (2.0)
1000 each
054007-56190
5005-T
Replenishment decal “T”
1000/cs., 0.9 (2.0)
1000 each
054007-56191
5005-U
Replenishment decal “U”
1000/cs., 0.9 (2.0)
1000 each
054007-56192
5005-V
Replenishment decal “V”
1000/cs., 0.9 (2.0)
1000 each
054007-56193
5005-W
Replenishment decal “W”
1000/cs., 0.9 (2.0)
1000 each
054007-56194
5005-X
Replenishment decal “X”
1000/cs., 0.9 (2.0)
1000 each
054007-56795
5005-Y
Replenishment decal “Y”
1000/cs., 0.9 (2.0)
1000 each
054007-56196
5005-Z
Replenishment decal “Z”
1000/cs., 0.9 (2.0)
1000 each
054007-56197
5005-DASH
Replenishment decal “—”
1000/cs., 0.9 (2.0)
1000 each
054007-56198
5005-BLANK
Replenishment decal “BLANK”
1000/cs., 0.9 (2.0)
1000 each
054007-56199
5005-0
Replenishment decal “0”
1000/cs., 0.9 (2.0)
1000 each
054007-56162
5005-1
Replenishment decal “1”
1000/cs., 0.9 (2.0)
1000 each
054007-56163
5005-2
Replenishment decal “2”
1000/cs., 0.9 (2.0)
1000 each
054007-56164
5005-3
Replenishment decal “3”
1000/cs., 0.9 (2.0)
1000 each
054007-56165
5005-4
Replenishment decal “4”
1000/cs., 0.9 (2.0)
1000 each
054007-56166
5005-5
Replenishment decal “5”
1000/cs., 0.9 (2.0)
1000 each
054007-56167
5005-6
Replenishment decal “6”
1000/cs., 0.9 (2.0)
1000 each
054007-56168
5005-7
Replenishment decal “7”
1000/cs., 0.9 (2.0)
1000 each
054007-56169
5005-8
Replenishment decal “8”
1000/cs., 0.9 (2.0)
1000 each
054007-56170
5005-9
Replenishment decal “9”
1000/cs., 0.9 (2.0)
1000 each
054007-56171
5005-DAS
Replenishment decal “arrow”
1000/cs., 0.9 (2.0)
1000 each
054007-56489
Ordering Information for 3M™ Scotchlite™ Reflective Lettering System Kit 5025
Product
Number
Product Description
Packaging
kgs. (lbs.)/cs.
Minimum
Order
UPC
5025-KIT
Reflective lettering system kit
1 kit/cs., 2.7 (6.0)
1 kit
054007-34385
5025-A
Replenishment decal “A”
100/cs., 2.7 (6.0)
100 each
054007-56210
5025-B
Replenishment decal “B”
100/cs., 2.7 (6.0)
100 each
054007-56211
5025-C
Replenishment decal “C”
100/cs., 2.7 (6.0)
100 each
054007-56212
5025-D
Replenishment decal “D”
100/cs., 2.7 (6.0)
100 each
054007-56213
5025-E
Replenishment decal “E”
100/cs., 2.7 (6.0)
100 each
054007-56214
5025-F
Replenishment decal “F”
100/cs., 2.7 (6.0)
100 each
054007-56215
5025-G
Replenishment decal “G”
100/cs., 2.7 (6.0)
100 each
054007-56216
5025-H
Replenishment decal “H”
100/cs., 2.7 (6.0)
100 each
054007-56217
5025-I
Replenishment decal “I”
100/cs., 2.7 (6.0)
100 each
054007-56218
5025-J
Replenishment decal “J”
100/cs., 2.7 (6.0)
100 each
054007-56219
5025-K
Replenishment decal “K”
100/cs., 2.7 (6.0)
100 each
054007-56220
5025-L
Replenishment decal “L”
100/cs., 2.7 (6.0)
100 each
054007-56221
5025-M
Replenishment decal “M”
100/cs., 2.7 (6.0)
100 each
054007-56222
5025-N
Replenishment decal “N”
100/cs., 2.7 (6.0)
100 each
054007-56223
5025-O
Replenishment decal “O”
100/cs., 2.7 (6.0)
100 each
054007-56224
5025-P
Replenishment decal “P”
100/cs., 2.7 (6.0)
100 each
054007-56225
5025-Q
Replenishment decal “Q”
100/cs., 2.7 (6.0)
100 each
054007-56226
5025-R
Replenishment decal “R”
100/cs., 2.7 (6.0)
100 each
054007-56227
5025-S
Replenishment decal “S”
100/cs., 2.7 (6.0)
100 each
054007-56228
5025-T
Replenishment decal “T”
100/cs., 2.7 (6.0)
100 each
054007-56229
5025-U
Replenishment decal “U”
100/cs., 2.7 (6.0)
100 each
054007-56230
5025-V
Replenishment decal “V”
100/cs., 2.7 (6.0)
100 each
054007-56231
5025-W
Replenishment decal “W”
100/cs., 2.7 (6.0)
100 each
054007-56232
5025-X
Replenishment decal “X”
100/cs., 2.7 (6.0)
100 each
054007-56233
5025-Y
Replenishment decal “Y”
100/cs., 2.7 (6.0)
100 each
054007-56234
5025-Z
Replenishment decal “Z”
100/cs., 2.7 (6.0)
100 each
054007-56235
5025-DASH
Replenishment decal “—”
100/cs., 2.7 (6.0)
100 each
054007-56236
5025-BLANK
Replenishment decal “BLANK”
100/cs., 2.7 (6.0)
100 each
054007-56237
5025-0
Replenishment decal “0”
100/cs., 2.7 (6.0)
100 each
054007-56200
5025-1
Replenishment decal “1”
100/cs., 2.7 (6.0)
100 each
054007-56201
5025-2
Replenishment decal “2”
100/cs., 2.7 (6.0)
100 each
054007-56202
5025-3
Replenishment decal “3”
100/cs., 2.7 (6.0)
100 each
054007-56203
5025-4
Replenishment decal “4”
100/cs., 2.7 (6.0)
100 each
054007-56204
5025-5
Replenishment decal “5”
100/cs., 2.7 (6.0)
100 each
054007-56205
5025-6
Replenishment decal “6”
100/cs., 2.7 (6.0)
100 each
054007-56206
5025-7
Replenishment decal “7”
100/cs., 2.7 (6.0)
100 each
054007-56207
5025-8
Replenishment decal “8””
100/cs., 2.7 (6.0)
100 each
054007-56208
5025-9
Replenishment decal “9”
100/cs., 2.7 (6.0)
100 each
054007-56209
203
Miscellaneous 3M™ Accessories
204
3M™ Scotchcast™ Filled
Cable Cleaning Kit 4413
3M™ Scotchcast™ Filled
Cable Cleaning Kit 4414
3M™ Scotchcast™ Service
Wire Cleaning Kit 4415
A specially
formulated
cleaning
solvent for
cleaning
grease and
Flex-Gel
filling
compound
from filled
core cable
without
damaging
262
connectors,
cable or individual conductors. One
bag will clean both cable ends at splice
point. Comes complete with the right
amount of solvent sealed in the bag.
No special tools are required. Virtually
no personnel contact with the solvent
or solvent vapors occurs during
cleaning because of the unique
packaging concept.
Kit contents:
• Heat-sealed cleaning bag with
solvent
• Pair gloves
• Puncture-protection bags (2)
Four different sizes are available to
meet a wide range of applications.
The Scotchcast
4414 Filled
Cable Cleaning
Kit provides
all the
necessary
materials for
cleaning the
filling
compound
from filled
263
copper and
fiber optic cables in an easy-totransport kit. This kit includes 15 pads
saturated in cleaning solvent, five
scraper pads and 10 towels.
The specially formulated cleaning
solvents are contained in premeasured
portions on saturated pads for fast,
easy, convenient solvent application to
cable core after sheath has been
removed. The solvent and wet pads
effectively remove cable filling
compound from conductors and
connectors with no damage to either.
Kit contents:
Additional materials required:
• Solvent Saturated Pads (15)
• Scotchcast 4435 Sheath Scuff
• Scraper Pads (5)
• Scotch 88T Vinyl Tape
• Towels (10)
Everything
needed to
clean
troublesome
filled service
wire is
included in
the 4415 Kit.
Solvent
saturated
pads are
individually
264
bagged for
convenience.
No extra tools are needed, and an
instruction sheet is included in each kit.
Kit contents:
• Towels (10)
• Solvent Saturated Pads (10)
3M™ Scotchcast™ 4435
Sheath Scuff
pg. 199
Scotch® 88T Vinyl Tape
pg. 190
3M™ Scotchcast™
Channeling Wedge W-9
3M™ Scotchcast™
Sheath Scuff 4435
3M™ Scotchcast™ Pair Saver
4458, 4458-W
The Scotchcast
W-9
Channeling
Wedge is used
in separating
bundles of
conductors
when plugging
cable. Made of
flexible plastic,
tapered at one
end and
grooved, the
W-9 wedge
separates conductors to ensure
maximum penetration of the
compound when forming a plug.
This flexible
80 grit, nonconductive,
aluminum
oxide strip is
used to clean
and rough up
cable sheath.
The clean,
266
scuffed
sheath greatly enhances the
bond between the compound and
sheath. Since the strip is 25.4 mm (1")
wide, it encourages the craftsperson to
scuff around the sheath rather than
along it, thus eliminating moisture
paths along the sheath, and also makes
it easy to get into tight places.
Size: 25.4 mm x 22.86 m (1" x 75') roll
Protect cable
pairs from
the sharp
edges of the
shield and
template,
while
permitting
standard
bond
connector
267
installations.
4458 Size: 21.6 mm x 5.4 m (0.85" x
18') rolls 4458-W Size: 38 mm x 5.5 m
(1.5" x 18') rolls
265
Ordering Information for Miscellaneous Accessories
Product Number
4413 Filled Cable Cleaning Kit
4413-S (for up to 200-pair cables)
4413-L (for up to 600-pair cables)
4413-XL (for 600- to 900-pair)
4413-SXL (for 900-pair and more)
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
8/cs., 5.18 (11.5)
4/cs., 4.95 (11)
2/cs., 5.40 (12)
2/cs., 9.54 (21.2)
8 kits
4 kits
2 kits
2 kits
054007-17442
054007-17443
054007-17441
054007-68466
4414 Filled Cable Cleaning Kit
1/cs., 0.63 (1.4)
1 kit
054007-57218
4415 Service Wire Cleaning Kit
10/kit, 10 kits/cs., 3.3 (7.3)
10 kits
054007-57219
4435 Sheath Scuff
1/box, 10/cs., 5.9 (13)
10 rolls
051144-13947
4458, 4458-W Pair Saver
4458– 21.6 mm x 5.4 m (.85" x 18') rolls
4458-W– 38 mm x 5.5 m (1.5" x 18') rolls
1/box, 10/cs., 1.9 (4.0)
1/box, 10/cs., 3.7 (7.9)
10 rolls
10 rolls
054007-32560
054007-33629
100/box, 1000/cs., 1.8 (4)
1000 each
054007-30229
Scotchcast W-9 Channeling Wedge
205
3M™ Shield Bonding Products
3M™ Scotchlok™
Shield Bond Connector
4460 (No Tabbing Required)
The 4460
Shield Bond
Connector is
designed to
make a stable,
low-resistance
electrical
connection
between the
268
shield of a
communications cable and a conductor
such as a strap, bar, or wire. The
connector consists of four parts: lower
member (base), upper member (top),
and two securing nuts (lock nuts). The
base teeth are set at such an angle as to
permit easy insertion under the cable
shield. Top and base members are
made of tin-plated tempered brass,
slightly curved to exert a continuous
spring force on sheath and shield after
clamping.
3M™ Scotchlok™ Shield Bond
Connector 4460-S
The 4460-S
Shield Bond
Connector is
designed to
make a
stable, lowresistance
electrical
connection
between the
269
shield of a
communications cable and a conductor
such as a strap, bar, or wire. The
connector consists of five parts: lower
member (base), upper member (top),
two securing nuts (lock nuts) and a
plastic shoe to aid connector insertion
and to protect conductors. The base
teeth are set
at such an angle as to permit easy
insertion under the cable shield. Top
and base members are made of tinplated tempered brass, slightly curved
to exert a continuous spring force on
sheath and shield after clamping.
206
Closures
pg. 117
Fiber Protection
pg. 215
3M™ Scotchlok™ Shield Bond
Connector 4460-D
The 4460-D
Shield Bond
Connector is
a downsized
version of
the 4460
Shield Bond
Connector.
Its small size
makes it an
270
excellent
choice for cables of 100-pair or less.
Its current-carrying capacity is equal to
or better than aluminum-shielded
cables of 100-pair or less and can be
used on all cable with 20.3 mm (0.8")
or smaller O.D. RUS Listed.
3M™ Scotchlok™ Shield Bond
Connector Assembly
4460-D/FO
The 4460D/FO Shield
Bond
Connector is
specifically
designed to
meet the
bonding needs
of fiber optic
cables that
contain
271
metallic or
fiberglass strength members. The
connector is a version of the 4460-D
Connector Assembly which utilizes
two additional plates to capture and
secure the strength members. Its
current-carrying capacity is equal to or
better than aluminum-shielded fiber
optic cable and can be used on all
cables with 20.3 mm (0.8") or smaller
O.D. RUS Listed.
3M™ Scotchlok™ Shield Bond
Connector 4462 (Designed
Specifically For C.A.C.S.P.
Cable)
The 4462
Shield Bond
Connector is
designed to
make a
stable, low
resistance
electrical
connection
between the
shield of a
272
communications cable and a conductor
such as a strap, bar, wire or braid.
3M™ Scotchlok™ Shield Bond
Connector 4462-FN
Includes flanged nuts.
3M™ Scotchlok™ Shield Bond
Connector 4462-SN
The 4462-SN
Shield Bond
Connector is
an improved
version of the
popular 4462
Shield Bond
Connector,
with a longer
and stronger
273
stud to easily
accommodate two bond braids (with
eyelets). It is specifically designed to
supply greater pullout strength than the
4462 Shield Bond Connector. The nuts
have been deepened, too, making them
much easier to hold and tighten. The
4462-SN Shield Bond Connector is
also designed for use with coated
cables and has superior electrical
properties for the protection of data
circuits.
3M™ Scotchlok™ 4462-SNA
The 4462-SNA has a longer stud,
deepened nuts and an insulating shoe.
3M™ Scotchlok™ Service
Wire Shield Connector
4463
The 4463
Service Wire
Shield
Connector is
designed to
make a
stable, low
resistance
274
electrical
connection between the shield of a
buried service wire and the ground
stud of a house terminal box or other
shield connector. The 4463 can be
used on service wire with an O.D. up
to 11 mm (0.45").
3M™ Scotchlok™ Shield Bond
Connector 4464
The 4464
Shield Bond
Connector is
a strip of
tin-plated
brass,
punched
with
mounting
holes and
two sets of
275
sharp teeth.
Each connector can join the shields of
up to four two-pair service wires to a
stud type shield connector. In addition
to providing a stable, low-resistance
electrical contact, the connector
provides excellent strain relief and
occupies a minimum of space. Each
connector will accommodate up to
four service wires with a shield
diameter of up to 5.6 mm (0.21") or
two service wires with a shield
diameter up to 819 mm (0.35").
Scotch® Grounding Braid
25T
This flat, tinplated
copper braid
conductor is
supplied for
use with
Scotchlok
shield bond
connectors.
When
276
clamped
firmly, 25T Braid provides low
electrical resistance connections for
dependable shield bonding, and its
physical strength contributes to strain
relief across spliced cables, 25T Braid
is l3 mm (1/2") wide, and is supplied
in 7.6 m (25') rolls.
Size: 13 mm x 7.6 m (1/2" x 25')
Scotch® Grounding
Braid with Eyelets 25T
Provides low
electrical
resistance
connections,
contributes
to strain
relief across
cables.
Eyelets fit
shield
connector
277
studs up to 6
mm (1/4") diameter. Size: 13 mm x 7.6
m (1/2" x 25'), eyelets spaced 76 mm
(3")
Size: 13 mm x 7.6 m (1/2" x 25'),
eyelets spaced 152 mm (6")
3M™ Grounding Braid
Dispenser Pack 25/4467
The 25/4467
Grounding
Braid
Dispenser
Pack is a
combination
of our
dependable
grounding
braid and
278
insulation
sleeve in one convenient package.
Equal lengths of each can be dispensed
from the 7.6 m (25') roll.
Size: Braid 13 mm x 7.6 m (1/2"x 25')
Sleeve 13 mm x 7.6 m (1/2" x 25')
25/4467 without eyelets
Ordering Information for 3M™ Shield Bonding Products
Product Number
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
100/cs., 1.8 (4)
100 each
054007-30193
4460-S Shield Bond Connector
100/cs., 2.1 (4.4)
100 each
054007-30625
4460-D Shield Bond Connector
100/cs., 2.1 (4.6)
100 each
054007-71217
100/cs.
100 each
054007-92757
100/box, 500/cs., 8.8 (19.4)
500 each
054007-17302
4460 Shield Bond Connector
(No Tabbing Required)
4460-D/FO Shield Bond Connector Assembly
4462 Shield Bond Connector
4462-FN Shield Bond Connector
100/box, 500/cs., 10.0 (22.1)
500 each
054007-63990
4462-SN Shield Bond Connector
100/box, 500/cs., 11.0 (24.3)
500 each
054007-71291
100/box, 500/cs., 10.9 (24)
500 each
054007-57157
4462-SNA Shield Bond Connector with Shoe
4463 Service Wire Shield Connector
10/bag, 1000/cs., 3.90 (8.6)
1000 each
054007-17301
4464 Shield Bond Connector
20/bag, 1000/cs., 7.03 (15.5)
1000 each
054007-30280
1/cs., 1 (2.1)
1 roll
054007-31102
1/cs., 1.08 (2.3)
1/cs., 1.08 (2.3)
1 roll
1 roll
054007-32670
054007-32671
1/box, 5/cs., 6.7 (14.7)
5 packs
054007-30561
25ST-GB 25T Grounding Braid
Size: 13 mm x 7.6 m (1/2" x 25')
25ST-BBE3 25T Grounding Braid with Eyelets
Size: 13 mm x 7.6 m (1/2" x 25')
Eyelets spaced 78 mm (3")
Eyelets spaced 156 mm (6")
25T-BBE6 25/4467 Grounding Braid Disp. Pack
Size: Braid 13 mm x 7.6 mm (1/2" x 25')
Sleeve 13 mm x 7.6 mm (1/2" x 25')
207
3M™ Sheath Repair Products
3M™ Armorcast™ Structural
Material
3M™ Armorcast™ Structural
Material Bulk 4560
Scotch® Tape Vinyl/Mastic
VM
Armorcast Structural Material is a
flexible fiberglass knit fabric strip
saturated with black resin syrup then
dried. No heat is required in the
installation process, just water. It
forms a tough durable covering that
cures in just 20 minutes. For use
on pressurized, non-pressurized,
polyethylene or lead sheathed cable.
Available in
rolls of 1.5 m
(5'), 3 m
(10') and
4.57 m (15'),
each 101.6
mm (4")
wide. Each
package contains five rolls and five
pairs of gloves.
VM Tape
seals out
moisture and
protects
against
corrosion
without the
need for
heating tools.
281
Two tapes in
one (Vinyl and Mastic)—VM tape is
especially designed for cable sheath
repair, splice case and load coil case
protection, auxiliary sleeve and cable
reel end sealing, drop wire insulating,
conduit repair and protection of CATV
components plus many other general
taping applications.
VM tape is a rubber based mastic
laminated to an all weather 0.18 mm
(7 mil) vinyl, which provides double
duty protection in one wrap. Four sizes
to meet all possible applications are
available; 38 mm – 559 mm
(1-1/2" – 22") width.
Size: 38 mm x 6 m (1-1/2" x 20')
101.6 mm x 3 m (4" x 10')
152 mm x 3 m (6" x 10')
559 mm x 3 m (22" x 10')
279
3M™ Armorcast™ Sheath
Repair Kit 4561
Dome Closures
pg. 128
Better Buried Closures
pg. 133
Foam-Sealed Closures
pg. 131
Contains all
products
required to
repair
damaged
Cable
Sheath. Kit
components
280
are designed
for use with Armorcast materials.
Kit contents:
• 1 roll Armorcast material,
101.6 mm x 4.57 m (4" x 15')
• 1 roll Scotch VM Tape,
101.6 mm x 3 m (4" x 10')
• 1 roll Scotch 50 Tape, 50 mm x 30 m
(2" x 100')
• 1 pair gloves
Ordering Information for 3M™ Sheath Repair Products
Product Number
4560 Armorcast Structural Material Bulk
4560-5 (Bulk, 1.5 m (5')
4560-10 (Bulk, 3 m (10')
4560-15 (Bulk, 4.5 m (15')
4561 Armorcast Sheath Repair Kit
VM Vinyl/Mastic Tape
VM-1.5x20 Size: 38 mm x 6 m (1-1/2" x 20')
VM-4x10 Size: 101.6 mm x 3 m (4" x 10')
VM-6x10 Size: 152 mm x 3 m (6" x 10')
VM-22x10 Size: 559 mm x 3 m (22" x 10')
208
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
5 rolls, 0.63 (1.4)
5 rolls, 1.27 (2.8)
5 rolls, 1.86 (4.1)
5 rolls
5 rolls
5 rolls
051138-57719
051138-57717
051138-57718
1 kit/cs., 1.68 (3.7)
1 kit
051138-57720
1 roll/box, 10/cs., 2.5 (5.7)
1 roll/box, 10/cs., 6.2 (11.6)
1 roll/box, 1/cs., 0.9 (2)
1 roll/box, 1/cs., 2.9 (6.9)
10 rolls
10 rolls
1 roll
1 roll
054007-27575
054007-27576
054007-27577
054007-27578
3M™ Adhesive and Magnetic Mounting Plates
Metal Mounting Plates with pressuresensitive adhesive and magnetic
backings are available in a wide
variety to accommodate most
telephone terminals and connector
blocks. Foam adhesive sticks
aggressively to most surfaces, with no
holes to drill. Quick to install, no
cumbersome equipment is required.
Magnetic Mounting Plates hold firmly
to any flat steel surface.
• Drilled, tapped, complete
with screws
• Fit most terminals and
connector blocks
• No holes to drill, installs quickly
• Foam adhesive or flexible
magnet backings
3M™ Mounting Plate 734
3M™ 735-M
For modular
connecting
blocks: (3M)
M-625SA,
(3M) M625TD, WE
42E, WE
104A, KR
625SA, KR
625TD, SE
6255A, SE
625TD, SE 725S.
51 mm x 79 mm (2" x 3-1/8").
Magnetic version of 735 Plate.
3M™ Mounting Plate 733
3M™ Mounting Plate 735
For modular
connecting
blocks: WE
42D, WE
103, SE
725A. 51
mm x 60 mm
(2"x 2-l/3").
For
connecting
blocks: WE
42A, SE
42A, 625A,
CAC 625A,
Kellogg 38,
Murdock 51
mm x 51 mm
(2" x 2").
282
3M™ Surface Primer 725
283
3M™ 734-M
Magentic version of 734 plate.
For surface
preparation
prior to
applying flat
station wire
and adhesive
backed
accessories.
Use on
clean, dry surfaces to increase
adhesion qualities of wire
and accessories. For use on rough,
unfinished or hard-to-adhere wall
surfaces.
Size: 222 ml (7.5 fl. oz.) can
285
284
3M 733-M
™
Magnetic version of 733 plate.
Ordering Information for 3M™ Adhesive and Magnetic Mounting Plates
Product Number
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
733 Mounting Plate
1/bag, 50/cs., 1.7 (3.8)
50 each
054007-17106
733-M
1/bag, 50/cs., 2.31 (5.1)
50 each
054007-17107
734 Mounting Plate
1/bag, 50/cs., 2.2 (4.8)
50 each
054007-17108
734-M
1/bag, 50/cs., 2.95 (6.5)
50 each
054007-17109
735 Mounting Plate
1/bag, 50/cs., 1.5 (3.2)
50 each
054007-31615
735-M
1/bag, 50/cs., 2.2 (4.5)
50 each
054007-31616
725 Surface Primer
Size: 22 ml (7.5 fl. oz.)
1/box, 12/cs., 3.3 (7.5)
12 cans
054007-30546
209
3M™ Holding and Fastening Products
3M™ Cable Tie and
Base Assembly 790
For securing
cable and
cable
bundles to a
surface, the
self-locking
cable tie can
286
be removed
and replaced with another 760 Cable
Tie when desired. For cable or bundles
with maximum O.D. of 45 mm (13/4").Adhesive-backed base has
knock-out holes for screws.
Base color: Ivory. Ties: Clear.
Size: Base, 25 mm x 50 mm (1" x 2").
Tie length: 182 mm (7.18").
3M™ Cable Tie and
Base Assembly 792
For securing
cable
bundles of
125 mm (1")
or less. Base
color: Ivory.
Ties: Clear.
Size: 25 mm
x 25 mm (1" x 1")
Tie length: 182 mm (7.18").
3M™ Cable Clips
3M™ Cable Ties
Clips are
made of
vinyl with
foam
adhesive
backing.
They may be
mounted on
most clean,
dry surfaces
without
288
drilling.
• Fit cables from 3.18 mm (1/8") to
12.7 mm (1/2")
• Low profile
• Eliminate drilling and nailing
• Use for internal equipment wiring
and around desks, furniture and
machines
• Wire can be removed without
removing clip
• Clips made of flame retardant
material (Oxygen index > 28)
Self-locking,
clear plastic
ties are used
to bundle
and secure
conductors
or cable.
3M™
Cable
Ties and
Bases
289
Cable Ties
and Tie-Base Assemblies are available
in various sizes for securing cable and
cable bundles to a surface. Bases are
adhesive-backed, with screw mounting
provisions.
• All-nylon ties
• ABS base
• Flame retardant
• Fungus insert
• Solvent resistant
• Service temperature range -40° to
85°C (-40° to 185°F)
287
Ordering Information for 3M™ Holding and Fastening Products
Product Number
Packaging
kg (lbs.)/cs.
Minimum Order
UPC
100/bag, 1000/cs., 1.5 (3.2)
100/bag, 1000/cs., 3.0 (6.7)
100/bag, 1000/cs., 2 (4.5)
100/bag, 1000/cs., 2.4 (5.2)
100/bag, 1000/cs., 3.86 (8.5)
100/bag, 1000/cs., 5.35 (11.8)
1000 each
1000 each
1000 each
1000 each
1000 each
1000 each
054007-12972
054007-30445
054007-12998
054007-13012
054007-21387
054007-21429
100/bag, 1000/cs., (3.35)
100/bag, 1000/cs., (4.55)
500/bag, 2500/cs., (34)
1000 each
1000 each
2500 each
054007-06226
054007-06227
054007-06264
1000/bag, 10,000/cs., (35.6)
500/bag, 2500/cs., (34.6)
10,000 each
2500 each
054007-06256
054007-06267
790 Cable Tie and Base Assembly
100/bag, 1000/cs., 7.8 (17.2)
1000 each
054007-11115
792 Cable Tie and Base Assembly
100/bag, 1000/cs., 1.4 (3.1)
1000 each
054007-27618
Cable Clips-Size: mm (in.)/Max Cable O.D.
706 Size: 25 (1), Max. Cable O.D.: 3 (1/8)
707 Size: 25 (1), Max. Cable O.D.: 6 (1/4)
708 Size: 32 (1-1/4), Max. Cable O.D.: 5 (3/16)
710 Size: 38 (1-1/2), Max. Cable O.D.: 6 (1/4)
712 Size: 44 (1-3/4), Max. Cable O.D.: 8 (5/16)
713 Size: 51 (2), Max. Cable O.D.: 10 (3/8)
Cable Ties
06226 7-15/16" Standard Natural (Box)
06227 12-1/16" Standard Natural (Box)
06264 15-1/16" Heavy Duty Natural (Bulk)
Mounting Cable Ties
06256 8-7/16" Mounting Natural (Bulk)
06267 15-21/32" Mounting Heavy Duty
Natural (Bulk)
210
Scotch® Cable and Wire
Tie Wrap
Scotch Cable
and Wire Tie
Wrap provides
a convenient
new way to
bundle wire
and cables,
assemblies
and to handle
other fastening
needs more
safely and
securely.
This reliable
fastener
290
provides
many advantages over traditional ones:
• Strong — holds greater suspended
weight than traditional fasteners
• Gentle on sensitive cable and wire,
•
•
•
•
•
•
eliminating crimping, abrasion and
work damage
Reusable, making maintenance and
retrofits easier
Flexible and easier to adapt to most
configurations
Thinner profile less likely to snag in
pulling
Cinches with less of the hand and
wrist stress required for more rigid
fasteners
Available in a variety of colors,
sizes and shapes, including easy-toapply straps, plus perforated and
continuous rolls
Economical for both permanent and
temporary applications
Scotch Cable and Wire Tie Wrap 100
is a general purpose fastener. Scotch
200 is designed for applications
requiring a flame-retardant or
ultraviolet-resistant fastener.
Scotch® Hand-Held
Dispenser HHD-100
The Scotch
Hand-Held
Dispenser
HHD-100 is a
lightweight
hand-operated
applicator made
of high-impact,
durable plastic.
It includes a
291
metal cutting
blade with blade safety guard and
hangs easily from a tool belt with a
weight of only three ounces. When
used with rolls of Scotch Cable and
Wire Tie Wrap, the Scotch HHD-100
is useful for a wide variety of
applications.
211
Specifications and Ordering Information for Scotch® Cable & Wire Tie Wrap
Product
Number
Product
Description
Roll
width (in.)
Roll
length (ft.)
Lengths/ T-Peel,
Shear
roll hook-to-loop Strength
Tensile
Strength
%
Elongation
Temp.
Rating
UPC
(051128-)
Scotch® Cable & Wire Tie Wrap 100 6-inch (152 mm) straps
100-3/8-WH
White
3/8” (9.5 mm)
25’ (7.6 m)
50
4.25 oz/in
27 psi
34 lbs/ 1/2 in width
37%
100°C (212°F)
54118
100-3/8-YL
Yellow
3/8” (9.5 mm)
25’ (7.6 m)
50
4.25 oz/in
27 psi
34 lbs/ 1/2 in width
37%
100°C (212°F)
54119
100-3/8-RD
Red
3/8” (9.5 mm)
25’ (7.6 m)
50
4.25 oz/in
27 psi
34 lbs/ 1/2 in width
37%
100°C (212°F)
54120
100-3/8-BU
Blue
3/8” (9.5 mm)
25’ (7.6 m)
50
4.25 oz/in
27 psi
34 lbs/ 1/2 in width
37%
100°C (212°F)
54121
100-3/8-GN
Green
3/8” (9.5 mm)
25’ (7.6 m)
50
4.25 oz/in
27 psi
34 lbs/ 1/2 in width
37%
100°C (212°F)
54122
100-3/8-BK
Black
3/8” (9.5 mm)
25’ (7.6 m)
50
4.25 oz/in
27 psi
34 lbs/ 1/2 in width
37%
100°C (212°F)
54040
Scotch Cable & Wire Tie Wrap 100 perforated rolls
®
Perforated in 6-inch (152 mm) strips
100-3/8P6-BK
Black
3/8” (9.5 mm)
54’ (16.5 m)
100
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
53596
100-1/2P6-BK
Black
1/2” (13 mm)
54’ (16.5 m)
100
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
53597
100-1P6-BK
Black
1” (25 mm)
54’ (16.5 m)
100
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
53598
Perforated in 8-inch (203 mm) strips
100-3/8P8-BK
Black
3/8” (9.5 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
53599
100-1/2P8-BK
Black
1/2” (13 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
53600
100-1/2P8-WH
White
1/2” (13 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
54139
100-1/2P8-GN
Green
1/2” (13 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
54140
100-1/2P8-BU
Blue
1/2” (13 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
54141
100-1/2P8-RD
Red
1/2” (13 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
54142
100-1/2P8-YL
Yellow
1/2” (13 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
54143
100-1P8-BK
Black
1” (25 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C ( 212°F)
53601
100-1P8-BU
Blue
1” (25 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C ( 212°F)
54153
100-1P8-GN
Green
1” (25 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C ( 212°F)
54152
100-1P8-RD
Red
1” (25 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C ( 212°F)
54154
100-1P8-WH
White
1” (25 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C ( 212°F)
54151
100-1P8-YL
Yellow
1” (25 mm)
54’ (16.5 m)
75
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C ( 212°F)
54155
Scotch® Cable & Wire Tie Wrap 100 continuous rolls
100-3/8UC-BK
Black
3/8” (9.5 mm)
54’ (16.5 m)
–
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
53593
100-1/2UC-BK
Black
1/2” (13 mm)
54’ (16.5 m)
–
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
53594
100-1UC-BK
Black
1” (25 mm)
54’ (16.5 m)
–
12 oz/in
20 psi
40 lbs/ 1/2 in width
35%
100°C (212°F)
53595
25’ (7.6 m)
50
8 oz/in
20 psi
40 lbs/ 1/2 in width
35%
110°C (230°F)
54031
–
–
–
–
–
–
–
53604
®
Scotch Cable & Wire Tie Wrap 200 6-inch (152 mm) strap
200-6ST
Black
3/8” (9.5 mm)
Scotch Cable & Wire Tie Wrap Dispenser HHD-100
®
3M100-HHD
3M100-HHD Blade
Hand-held
dispenser
–
Replacement
Blade for
HHD-100
Hand-Held
Dispenser
* For straps, refers to body width. Strap heads are 3/4-inch wide.
212
02120010833
Notes
213
Notes
214
Notes
215
Notes
216
Notes
217
Notes
218
Notes
219
Notes
220
工商网监
湘ICP备2023018690号
