3/4-5-5421

UHMW Polyethylene Tape 5421 ∙ 5423 Technical Data Product Description Product Construction Typical Physical Properties July, 2016 3M™ UHMW Polyethylene Tapes are film coated with a rubber adhesive which provides an excellent abrasion resistant surface. These tapes feature a unique combination of properties that make it ideal for many tough impact wear or sliding applications. 3M™ UHMW-PE Film Tape 5421 is a thinner version of 3M™ UHMWPE Film Tape 5423. Standard Roll Backing Adhesive Color Length UHMW-PE Film Rubber Translucent 36 yds. (32.9 m) (ultra-high molecular weight polyethylene) Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. ASTM Test Method 3M tape 5421 Adhesion to Steel: Tensile Strength: Elongation at Break: Backing Thickness: Total Tape Thickness (without liner): Liner Thickness: Temperature Use Range: 3M tape 5423 Adhesion to Steel: Tensile Strength: Elongation at Break: Backing Thickness: Total Tape Thickness (without liner): Liner Thickness: Temperature Use Range: G/COE/Product Technical Data Sheets/425.431.438.1433.1437 34 oz./in. width (37 N/100 mm) 46 lbs/in. width (796 N/100 mm) 470% 5.0 mils (0.13 mm) 6.7 mils (0.17 mm) D-3330 D-3759 D-3759 D-3652 D-3652 3.5 mils (0.09 mm) -30° to 225°F (-34° to 107°C) D-3652 36 oz./in. width (39 N/100 mm) 86 lbs/in. width (1500 N/100 mm) 530% 10 mils (0.25 mm) 12 mils (0.30 mm) D-3330 D-3759 D-3759 D-3652 D-3652 3.5 mils (0.09 mm) -30° to 225°F (-34° to 107°C) D-3652 Features   Tape demonstrated no evidence of wear through after Taber Abrasion at 1000 cycles, using CS-10 wheel and 1000g load when applied to S-37 mounting sheet. Low water vapor transmission rate