3-5-8561

3 Polyurethane Protective Tape 8561 Technical Datasheet Product Description April 2010 3M™ Polyurethane Protective Tape 8561 is made from an abrasion-resistant polyurethane elastomer that resists puncture, tearing, abrasion and erosion. 3M 8561 Tape provides a simple, easy, and fast method of protecting a surface from corrosion, abrasion, erosion and minor impact damage. 3M 8561 Tape is constructed with a long-aging, solvent-resistant, pressure-sensitive, acrylic adhesive protected with an easy-release paper liner. 3M™ Polyurethane Protective Tape 8561 is a transparent tape available with a paper liner only. Typical Physical Properties and Performance Characteristics Notes: 1) The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 2) ASTM = American Society for Testing and Materials. 3) Metric values are listed in parenthesis. A. Dimensions Approximate Applied Thickness:* 0.012 inch (0.30 mm) Film 0.002 inch (0.06 mm) Adhesive 0.014 inch (0.36 mm) = Total thickness Standard Roll Length: 36 yd (32.9 m) Available Widths: Minimum 1/4 inch Maximum 48 inches (0.625 cm to 122 cm) Approximate Weight:* 0.79 lb/yd2 (428 g/m2) *Excludes the paper liner that is removed from the tape prior to application. B. Typical Physical Properties and Performance Characteristics Property Test Method Units Typical Value Tensile Strength @ Break ASTM D882 lb/in (N/100 mm) 75 (1313) Elongation % @ Break ASTM D882 % 400 ASTM D3330 Method A 24 hour dwell ASTM D3330 Method A 24 hour dwell ASTM D3330 Method A 24 hour dwell ASTM D3330 Method A 24 hour dwell oz/in (N/100 mm) 36 (39) oz/in (N/100 mm) 62 (67) oz/in (N/100 mm) 26 (28) oz/in (N/100 mm) 42 (45) Peel Adhesion @ 70°F (21°C) to: Plate Glass Anodized Aluminum Acrylic Enamel Paint Mil-P-23377 Epoxy Primer General Information • 3M 8561 Tape has good environmental resistance properties and has been used to isolate and protect substrates from environmental damage and corrosive elements. • 3M 8561 Tape may be painted per 3M Technical Bulletin “3M™ Polyurethane Protective Tape, Paint Instructions” (70-0702-6358-0 ). 3M™ Polyurethane Protective Tape 8561 Technical Datasheet Safety and Regulatory • 3M™ Polyurethane Protective Tape is 100% solids and contains no hazardous air pollutants (HAPs), volatile organic components (VOCs). Respiratory protection is not required under normal use conditions. • Polyurethane Protective Tape meets US Federal and California regulations for landfillable materials. The product is potentially recyclable. • Packaging materials meet US Federal and California regulations for landfillable materials and are recyclable or reusable. • This product is considered to be an article that does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. Shipping and Storage No special/hazardous labeling or packaging required and no regulations for air, ground or water shipment for this product. Keep film in a clean area, away from excessive moisture and out of direct sunlight. Store rolls in the shipping carton. Return partially used rolls to the shipping carton. Shelf Life: Two (2) years from the date of manufacture or as expressly certified by 3M. Precautionary Information Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, please visit www.3M.com/msds or call 1-800-364-3577 or (651) 737-6501. For Additional Information In the U.S., call toll free 1-800-235-2376, or fax 1-800-435-3082 or 651-737-2171. For U.S. Military, call 1-866-556-5714. If you are outside of the U.S., please contact your nearest 3M office or one of the following branches: Australia Austria Brazil Canada 61-2-498-9711 tel 01-86686-298 tel 55 19 3838-7876 tel 800-410-6880 ext. 6018 tel 61-2-498-9710 fax 01-86686-229 fax 55 19 3838-6892 fax 800-263-3489 fax China Denmark France Germany 86-21-62753535 tel 45-43-480100 tel 0810-331-300 tel 02131-14-2344 tel 86-21-62190698 fax 45-43-968596 fax 30-31-6195 fax 02131-14-3647 fax Italy Japan Korea Netherlands 02-7035-2177 tel 03-3709-8245 tel 02-3771-4114 tel 31-71-5-450-272 tel 02-7035-2125 fax 03-3709-8743 fax 02-786-7429 fax 31-71-5-450-280 fax South Africa Spain Switzerland United Kingdom 11-922-9111 tel 34-91-321-6000 tel 01-724-9114 tel (0) 161-237-6174 tel 11-922-2116 fax 34-91-321-6002 fax 01-724-9068 fax (0) 161-237-3371 fax Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3 This product was manufactured under a 3M quality standard registered under AS9100 standards. Aerospace and Aircraft Maintenance Department 3M Center, Building 223-1N-14 St. Paul, MN 55144-1000 1-800-235-2376 www.3M.com/aerospace 3M is a trademark of 3M Company. Please recycle. Printed in U.S.A. © 3M 2010 (4/10) All rights reserved. 60-9700-0108-1