3000-8X4-1000M

Technical Data | September 2019 TM 3M™ Polycarbonate Carrier 3000 Product description 3MTM Polycarbonate Carrier 3000 used in conjunction with a suitable 3MTM Cover Tapes, serves as a reliable and convenient means of helping protect and transport electrostatically-sensitive electrical and electronic devices, and deliver them to the assembly point. 3M carrier 3000 is a continuous, splice free, polycarbonate carrier with precisely formed pockets to ensure component fit to ANSI/EIA Standard. 3M carrier 3000 is available in a broad selection of pocket designs with dimensions to accommodate a variety of common electrical and electronic parts. Customized 3M carrier 3000, including those for connectors, with dimensions specific to your requirements, is also available upon request. EIA-481-E Standard dimensions E1 D0 B P0 P2 t D1 F B0 K0 A A View A-A B P1 View B-B B1 A0 Construction Embossed, heat-resistant, polycarbonate sheet. Dimensional properties Product format 3M carrier 3000 is available as continuous, splice-free, mostly 8 mm through 44 mm carrier in level winding format on 330 mm (13") up to 560 mm (22") plastic or recyclable cardboard reels. Planetary winding format is also available upon request. Reel capacity will typically be from 30 to 2,000 meters, depending upon the pocket depth, pitch and winding format. Typical carrier tape break strength 3MTM Polycarbonate (PC) Carrier Tape Polystyrene (PS) Carrier Tape 13 12mm carrier break strength (kgf) 3M carrier 3000 meets the ANSI/EIA-481-E Standard for the dimensions illustrated to the right. 12 12.5 11 10 9 9.8 8 7 7.2 6 5 5.5 4 3 2 1 0 3M PC carrier 3000 3M PC carrier 2703 & 2705 Tri-layer PS PS Note: The technical information and data should be considered representative or typical only and should not be used for 3M™ Polycarbonate Carrier 3000 Typical mechanical properties – shrinkage 3MTM Polycarbonate Carrier 3000 exhibits shrinkage of less than 0.1% for P0-10, even after 24 hours exposure at 85oC (185oF). This compares favorably to the EIA-481-E Standard which stipulates that the P0-10, or ten-pitch tolerance, maintain a dimension of 40.0 mm ± 0.2 mm, an implied tolerance of ±0.5%. Carrier shrinkage may result in problems with feeding, pocket position and, in the case of the pocket dimensions, parts sticking in the pockets. The extent of shrinkage in cold-formed polystyrene carrier pockets can be rapidly accelerated by exposure to elevated temperature, and will depend upon the duration of exposure and the maximum temperature reached. Carrier P0-10 shrinkage after 24 hours Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Temperature 3M carrier 3000 Typical polystyrene 52°C (126°F) , 95%RH < 0.1% < 0.5% 85°C (185°F) < 0.1% < 0.5% Electrical properties The electrical and triboelectric properties of 3M carrier 3000 is engineered to help provide protection for static-sensitive components through an effective balance between the electrostatic shielding and electrostatic decay properties of the carrier. 3M carrier 3000 exhibits a nominal surface resistance of ≥104 Ω and ≤108 Ω. 3M carrier 3000 also exhibits desirable triboelectric properties which may be appropriate for packaging electrostatically-sensitive components. Camber 3M carrier 3000 meets the EIA-481-E Standard for camber which is not greater than 1 mm in 250 lineal millimeters in a planetary format. For carrier in a level winding format, camber will not be greater than 2 mm in 250 lineal millimeters. Recyclability 3M carrier 3000 is a carbon-filled thermoplastic polymer film which can be recycled after use. However, recycling programs for this product may not exist in your area. Cover tape recommendations 3M™ Static Dissipative Heat Activated Adhesive Cover Tapes or 3M ™ Pressure Sensitive Adhesive Cover Tapes are recommended for use with 3M carrier 3000. (2) 3M™ Polycarbonate Carrier 3000 Typical physical properties and performance characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Final product specifications and testing methods will be outlined in the products Certificate of Analysis (COA) that is provided once the product is approved by 3M for general commercialization and development work is completed. Description Material properties Physical properties Electrical properties Chemical properties Product format Type Type Max, usable temperature Tensile strength (yield) Tensile strength (break) Impact strength Camber (planetary format) Camber (level winding format) Optical Resistance Static decay Extractable ionics (CI-, NO3-, SO42-, Na+, K+, Ca2+) Reel type Reel hub inside diameter Pockets per reel Length Units °C (°F) MPa (Kpsi) MPa (Kpsi) J/m (Ft-lb/in) mm (in) mm (in) % Ohms Second ppm Typical performance Polycarbonate 125 (257) 57.2 (8.3) 57.2 (8.3) >70 (1.32) ≤ 1.0 (0.039) ≤2.0 (0.079) Opaque 1.0 x 106 0.01