316 IR

3M™ Scotchlok™ Moisture Resistant Self-Stripping Electrical Spring Connector 316IR Data Sheet November 2010 Applications 3M™ Scotchlok™ Electrical Spring Connector 316IR is used to electrically connect two or three wire ends, insulate the connection and provide a moisture-resistant seal without stripping of the wires. Agency Approvals, Self Certifications, Mil Specs Meets requirements of: Wire Range 22-16 AWG solid or stranded copper conductors with a maximum insulation diameter of .160 inches Construction U-Contact: Tin-plated brass, .02 in. (0,5 mm) thick Insulator: Flame-retardant nylon Color: Black cap -White body Sealant: Mineral Oil Base EG-3 grease UL Listed, Standard 486C, UL File E23438 Specifications Voltage Rating: Temperature Rating: Weight: Engineering/ Architect Specification A UL Listed self-stripping electrical connector for connecting two or three conductors in the range of 22 through 16 AWG solid or stranded copper conductors with a maximum insulation diameter of .160 inches Federal Specification W-S610: Recommended Installation Tools 600 volts maximum 105 Deg C (221 Deg F) .0077 lbs (3.49 gm) “Commercial package only” Type 1 Class 1 Kind cu Style G 3M™ Crimping Tool E-9BM 8” Mechanics (slip joint) pliers 1 of 2 3 3M™ Scotchlok™ Moisture Resistant Self-Stripping Electrical Spring Connector 316IR Installation Technique WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. 1. Insert 2 or 3 un-stripped conductors completely into connector and check their position by looking through the translucent body. 2. Hold toll perpendicular to the conductors and make the connection by driving the cap down flush with the top edge of the connector body. Parallel Connection Tap/Run Connection Shelf Life & Storage 3M™ Scotchlok™ Electrical Spring Connector 316IR has a 5-year shelf life from date of manufacture when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and