3357-6237-1C

3M™ D Sub EMI Junction Shell Metalized Plastic • Protection from EMI/ESD • Easy assembly reduces time and labor for low cost • Light weight and a compact design • Strain Relief compensates for multiple cable diameters • Jack screws provide positive retention • RoHS* compliant Date Modified: January 15, 2007 TS-2132-02 Sheet 1 of 3 Physical Shell and Hardware Shell Material: ABS Shell Plating: Nickel Over Copper Hardware: (2) Jackscrews #4-40 × .438" (2) Saddle Washers #4 (2) Nuts #4-40 (2) Screws #4-40 × .450" Material: Steel Plating: Bright Zinc Compression Insert: Material: Thermo Plastic Elastomer Flammability: UL 94HB Durometer: 75 + / -5 Mounting Hardware: See Specification Sheet TS-0142 Environmental Temperature Rating: 0°C to +75°C "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ D Sub EMI Junction Shell Metalized Plastic In c h [m m ] T o le ra n c e U n le s s N o te d in c h .0 .0 0 ± .1 ± .0 1 ± .0 0 5 .0 0 0 [ ] D im e n s io n s fo r R e fe re n c e O n ly O DIM. "D" DIM. "F" DIM. "E" [DIM. "E"] DIM. "C" DIM. "A" DIM. "B" Table 1 - Junction Shell Dimensions 3M Part Number Dim. "A" Dim. "B" Dim. "C" Dim. "D" Dim. "E" 3357-6209-1C 1.217 [30.91] 1.692 [42.98] .400 [10.16] N/A 3357-6215-1C 1.540 [39.12] 1.650 [41.91] .400 [10.06] N/A .640 [16.26] 3357-6225-1C 2.090 [53.08] 1.800 [45.72] .522 [13.26] .710 [18.03] 3357-6237-1C 2.734 [69.44] 1.975 [50.17] .726 [18.44] .906 [23.01] 3357-6250-1C .770 [19.56] 2.645 [67.18] 2.000 [50.80] .726 [18.44] .940 [23.88] Note: *These numbers will vary depending upon the compressibility of the wire. Backshell Dimension Table Table 1 3 Interconnect Solutions http://www.3M.com/interconnects/ Dim. "F" .984 [24.99] 1.312 [33.32] 1.857 [47.17] 2.500 [63.50] 2.406 [61.11] Cable O.D. Range Min Max* 0.19 [ 4.8] 0.35 [8.9] 0.19 [ 4.8] 0.35 [8.9] 0.19 [ 4.8] 0.46 [11.7] 0.30 [ 7.6] 0.68 [17.27] 0.30 [ 7.6] 0.84 [21.34] TS-2132-02 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ D Sub EMI Junction Shell Metalized Plastic O DIM. "G" (Collar) 5 6 2 1 4 ID 3 Elastomeric Backshell Inserts Figure 1 Table 2 - Compression Inserts Dimensions Insert For 1 2 3 4 5 6 G OD ID OD ID OD ID OD ID OD ID OD ID 0.475 [ 12.07 ] 0.320 [8.13 ] 0.360 [ 9.14 ] 0.315 [ 8.00 ] 0.360 [ 9.14 ] 0.285 [ 7.24 ] 0.360 [ 9.14 ] 0.255 [ 6.48 ] 0.360 [ 9.14 ] 0.210 [ 5.33 ] N/A N/A 0.475 [ 12.07 ] 3357-6225 0.600 [ 15.24 ] 0.450 [ 11.43 ] 0.450 [ 11.43 ] 0.410 [ 10.41 ] 0.450 [ 11.43 ] 0.370 [ 9.40 ] 0.450 [ 11.43 ] 0.300 [ 7.62 ] 0.450 [ 11.43 ] 0.230 [ 5.84 ] N/A N/A 0.600 [ 15.24 ] 3357-6237 0.655 [ 16.64 ] 0.650 [ 16.51 ] 0.700 [ 17.78 ] 0.620 [ 15.75 ] 0.810 [ 20.57 ] 0.570 [ 14.48 ] 0.655 [ 16.64 ] 0.500 [ 12.70 ] 0.655 [ 16.64 ] 0.425 [ 10.80 ] 0.655 [ 16.64 ] 0.350 [ 8.89 ] 0.810 [ 20.57 ] 3357-6250 0.810 [20.57] 0.650 [16.51] 0.700 [17.78] 0.620 [15.75] 0.655 [16.64] 0.570 [14.48] 0.655 [16.64] 0.500 [12.70] 0.655 [16.64] 0.425 [10.80] 0.655 [16.64] 0.350 [8.89] 0.810 [ 20.57 ] 3357-6209 3357-6215 Cable Insert Dimension Table Table 2 Ordering Information 3357-62XX-1C Backshell Size 09 = 9 Pin 15 = 15 Pin 25 = 25 Pin 37 = 37 Pin 50 = 50 Pin 3 Interconnect Solutions http://www.3M.com/interconnects/ TS-2132-02 Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. © 3M 2007